Connection Method Sample Clauses

Connection Method. ‌ Connection methods between IP and the Risk Management Agency are limited to SSL and IPSEC VPN connections. SSL VPN connection is a VPN client solution that establishes connection to RMA’s front-end firewall. Each client requires a credential login with a password to establish the SSL VPN connection. Site-to-site connections will be established with IPSEC VPN configuration with end points at that AIP and RMA’s firewall. Encryption methods will be established at time of creation and be at the highest level available with existing appliances.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Connection Method. The security of the information being retrieved by SERVICE PROVIDER from USAC shall be protected in accordance with the Federal Information Security Modernization Act of 2014, as amended (“FISMA”) and NIST requirements. The connections at each end must be located within controlled access facilities, guarded twenty-four (24) hours a day. Interconnections utilizing Internet VPN technologies may be terminated on shared infrastructure equipment that is not isolated from the Internet. VPN transmission protocol/internet protocol (“TCP/IP”) traffic to USAC is internet protocol security (“IPSEC”) encrypted using advanced encryption standards (“AES”) 128 encryption or stronger. There may be for a specific system critical seasonality or performance considerations (e.g., a filing window or specific time of the year or day when system performance is expected to be constrained) during when USAC requests the SERVICE PROVIDER to avoid access.
Sample 1Sample 2Sample 3
Connection Method. ‌ RMA will provide authentication and access management capabilities as part of the ISA. Connections from the <<RO Code or Acronym>> to RMA endpoints are always performed over an encrypted TCP/IP or UDP connection. If an SSL\TLS connection is not supported, IPSEC is used to encrypt the communication. Additional specifications of the interconnection can be found in Section 12. information which can be used to distinguish or trace an individual’s identity, such as name, social security number, date and place of birth, mother’s maiden name, biometric records, etc., including any other personal information which is linked or linkable to an individual.
Sample 1
Connection Method. Connection Method At initial deployment, an installation and maintenance (I&M) technician will connect the Optical Network Terminal (ONT) to a central point of demarcation where a cable television I&M technician will make final connections to provide the cable television service. After the installation of the ONT, a cable television field technician will test the existing in-home coaxial cable to determine if it is technically acceptable and will connect the service. If no coaxial cable exists or the coaxial cable is unacceptable, the technician will install wiring to the first cable outlet, and will install new coaxial wiring to other locations identified by the customer at the customer’s request and expense. The customer may choose to self-install such wiring, or to obtain inside wiring installation service from a third party or Verizon.
Sample 1
Connection Method. ‌ How are the two systems connected? Direct connect? Virtual Private Network? Over the Internet? FIPS-140-2 compliant encryption? [System B] will be required to connect to RMA over an IPSEC Virtual Private Network (VPN). The VPN connection will be controlled by the RMA Service Delivery Branch to allow access only to necessary ACRSI Web Services by utilizing firewall policies for restrictions. USDA CA certificates will be used to authenticate the [System B] to RMA.
Sample 1

Related to Connection Method

  • NETWORK INTERCONNECTION METHODS 64.1 This Section sets forth the terms and conditions for Network Interconnection Methods (NIMs) provided between CenturyLink and CLEC for the Interconnection Facilities established between the Parties’ networks. Additionally, this Section describes the physical architecture for the Interconnection of the Parties’ facilities and equipment required for the transmission and routing of Local Traffic, ISP-Bound Traffic, IntraLATA LEC Toll Traffic, VoIP-PSTN Traffic, Transit Traffic and Jointly Provided Switched Access Service Traffic.

  • Construction Methods No four course of brick-work, with three joints, shall exceed in height, when built, one inch more than the same bricks piles upon one another without mortar. The bricks are to be well soaked in water before use on works, in proper through so as to be thoroughly wet when layed. The Cessation of the bubbles through the water is an irldication of saturation being complete. For ensuring thorough soaking of the bricks every one or two bricklayers or more as necessary, shall be provided with tubs for use The wall of structures shall be carried up regularly in all cases 1` when the nature of the work will admit of it not leaving any part 915mm (3 feet) lower than another. Horizontal courses shalI be straight, level and even and faces of walls smooth and plumb. A straight edge and a plumb- xxx shall be used for constant checking during progress of the work. No brick-bats shall be permitted to be used except when necessary for obtaining the dimension of the different course or for obtaining the specified bond. All unfinished work must be raked back in course unless otherwise directed arid when new work is to be jointed to it the surface of unfinished work must be cleaned and wetted. The bricks shall be laid by placing sufficient mortar on the wall and forcing every brick into it in such a manner as to completely fill every joint with moratar whether at the bottom, side or end of the brick. The mortar to be used shall be that specified for the relevant schedule items and shall comply with the specification for the mortar specified. The bound used shall be English and shall be carried throughout the work. At all angles forming the junction of any two walls, the bricks shall, at each alternate course be carried into each of the respective walls, so as to thoroughly unite the work. V'Jhen the faces are to be plastered, the joints shall be well raked out before any plaster is laid on should the plaster from want of proper joint ranking detach and 7 fall off from the brick work, the contractor shall strip off the plaster bodily to the extent ordered by Superintending Engineer and shall re-do the work properly at his own expense. All requisite scaffolding shall be provided at the contractor's expense and shall be double i.e., must it have two sets of upright supports Care must be taken to ensure the safety of the work people and the contractor must comply with such instructions as the Superintending Engineer may issue to ensure such safety. The contractor will be entirely responsible for any damage or injuries to person or property resulting from ill-erected scaffolding, defective ladders, or otherwise arising out of his default in this respect. The brick work for the retaining wall shall proceed side by side with the depositing and compacting of earth between the retaining walls. At no time shall the brick-work be constructed more than 405mm (1'-4") above Y the compacted earth. In the retaining wall weep-holes shall be provided at suitable intervals as instructed during execution, with the inner surface of the weep-holed plastered 20mm (3/4") thick in cement mortar 1:4 crouched rock of grades in different layer shall be provided at the inner end of the weep-holes to prevent the choking of the weep-holes to have full drainage. No extra payment will be made for this and no deductions will be made for this in the brick-work.

  • PayPal as Login Method We may allow you to authenticate with PayPal when you log into certain external websites or mobile apps. If we do so, we may share your login status with any third party enabling you to log in in this way, as well as the personal and other account information that you consent to being shared so that the third party can recognize you. PayPal will not give the third party access to your account and will only make payments from your account to that third party with your specific authorization and instruction. If you enable visitors to authenticate with PayPal when they log into your website, app, or your customer accounts, you must agree to any specific terms applicable when this functionality is made available to you, and comply with any specifications in any integration manual or guideline. We do not guarantee or otherwise represent the identity of any user of this login method. We will not share with you the personal and other account information of the user (including login status) held by PayPal unless the user has consented to our disclosure of that information to you. Corporate Customers When we refer to “PSD2” in this section we mean the Second EU Payment Services Directive ((EU)2015/2366). We consider you to be a “Corporate Customer” if, on the date you entered into this user agreement, you are not: • A consumer, (being an individual acting for purposes other than a trade, business or profession). • A micro-enterprise (being an enterprise which employs fewer than 10 persons and has an annual balance sheet that does not exceed 2 million EUR. We and you may agree that certain provisions of PSD2 (as implemented by local law) do not apply to your use of our service if you are a Corporate Customer. If you are a Corporate Customer you agree that: • You are not entitled to a refund for billing agreement payments. • Where you identify a problem you have up to 60 (sixty) days from the date on which the problem happened to notify us about it, after which time we have no obligation to investigate and refund you. • We are not obliged to comply with the information requirements set out in Title III of PSD2 and their equivalents in any implementation of PSD2 in member states of the European Economic Area that may apply to you (“PSD2 transpositions”). • Articles 72 and 89 of PSD2 and equivalent provisions in PSD2 transpositions do not apply to your use of our service, meaning that, even where we may say so otherwise in this user agreement, we are not liable to you for the losses or damage you may suffer under those articles and provisions. Section numbers and defined words

  • Calculation methodology No adjustment in the Conversion Price need be made unless the adjustment would require an increase or decrease of at least 1% in the Conversion Price then in effect, provided that any adjustment that would otherwise be required to be made shall be carried forward and taken into account in any subsequent adjustment. Except as stated in this Article VI, the Conversion Rate will not be adjusted for the issuance of Common Stock or any securities convertible into or exchangeable for Common Stock or carrying the right to purchase any of the foregoing. Any adjustments that are made shall be carried forward and taken into account in any subsequent adjustment. All calculations under Article V and Section 6.06 hereof and this Section 6.07 shall be made to the nearest cent or to the nearest 1/10,000th of a share, as the case may be.

  • Billing Method 1.5.1 To receive payment for services rendered under this contract, the Contractor shall submit a fully completed invoice for work previously performed to: Minneapolis Public Housing Authority Attention: Accounts Payable, Suite 307 0000 Xxxxxxxxxx Xxx X, Xxxxxxxxxxx, XX 00000 or: xxxxxxxx@xxxxxxx.xxx

  • Interconnection Customer Provided Services The services provided by Interconnection Customer under this LGIA are set forth in Article 9.6 and Article 13.5.1. Interconnection Customer shall be paid for such services in accordance with Article 11.6.

  • Interconnection Service Interconnection Service allows the Interconnection Customer to connect the Large Generating Facility to the Participating TO’s Transmission System and be eligible to deliver the Large Generating Facility’s output using the available capacity of the CAISO Controlled Grid. To the extent the Interconnection Customer wants to receive Interconnection Service, the Participating TO shall construct facilities identified in Appendices A and C that the Participating TO is responsible to construct. Interconnection Service does not necessarily provide the Interconnection Customer with the capability to physically deliver the output of its Large Generating Facility to any particular load on the CAISO Controlled Grid without incurring congestion costs. In the event of transmission constraints on the CAISO Controlled Grid, the Interconnection Customer's Large Generating Facility shall be subject to the applicable congestion management procedures in the CAISO Tariff in the same manner as all other resources.

  • Procurement Method (a) Quality-Based Selection (b) Selection under a Fixed Budget

  • Balance Computation Method For all dividend-bearing Accounts, dividends are calculated by the average daily balance method which applies a daily periodic rate to the average daily balance for the average daily balance calculation period. The average daily balance is determined by adding the full amount of the principal in Your Account for each day of the period and dividing that figure by the number of days in the period. Accrual on Noncash Deposits. For dividend-bearing Accounts, dividends will begin to accrue on the business day that You deposit noncash items (e.g. checks) into Your Account.

  • ICE Method The method used to calculate One-Month LIBOR, as described in Section 3.05.

Time is Money Join Law Insider Premium to draft better contracts faster.