CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a wood float 13 Surface beds, slabs, etc m2 47 SMOOTH FORMWORK (DEGREE OF ACCURACY II) Smooth formwork to sides 14 Surface beds m2 3 REINFORCEMENT (PROVISIONAL) Fabric reinforcement 15 Type 193 fabric reinforcement m2 47 PAVING Carried Forward R Section No. 2 Bill No. 17 External Works Bespoke Global Efficacy Ramgoolam (Pty) Ltd Brought Forward R 80mm thick 30MPa precast concrete grey interlocking block paving blocks in accordance with SANS 1058, laid to falls on and including 25mm thick sand layer with joints filled in with sand, compacted with a vibration compactor 16 Paving to roadworks and parking areas to falls m2 128 50mm thick 30MPa precast concrete grey interlocking block paving blocks in accordance with SANS 1058, laid to falls on and including 25mm thick sand layer with joints filled in with sand, compacted with a vibration compactor 17 Paving to aprons m2 74 Carried Forward to Summary of Section No. 2 R Section No. 2 Bill No. 17 External Works Bespoke Global Efficacy Ramgoolam (Pty) Ltd Item No BILL NO. 18 Quantity Rate ELECTRICAL INSTALLATION PREAMBLES For Preambles refer to the General Preambles for Trades 2017 and any amplification/s stated hereunder SUPPLEMENTARY PREAMBLES The SUPPLEMENTARY PREAMBLES applicable to the same trade in the preceding Sections, apply equally to this BILL This Bill of Quantities must be read in conjunction with the attached specifications and details (CPAP WORK GROUP NO. 160) unless otherwise stated ACCESS CONTROL ACCESS BARRIERS 1 Vehicle boom gate and spike barrier No 2 2 Spike boom barrier extension No 2 Two button remotes to operate claws and boom to be handed to the Area Commissioner No 2 3 Temporary switch fixed to Guards Office for claw and boom operation No 2 4 Two way red and green, 12V DC Traffic light Unit including wall mounted brackets (SS), harness and interface relay No 2 Carried Forward R Section No. 2 Bill No. 18 Electrical Bespoke Global Efficacy Ramgoolam (Pty) Ltd Amount Brought Forward R
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a wood float/steel trowel 21 Surface beds, slabs, etc m2 1,134 MOVEMENT JOINTS ETC (PROVISIONAL) Carried to Collection R Expansion joints with bitumen impregnated softboard between concrete and brickwork 22 10mm Joints not exceeding 300mm high along edges of surface beds m 1,134 Saw cut joints
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a steel trowel 4 Ramps to falls m2 19 5 Surface beds, slabs, etc m2 1 427
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a power float 5 Surface beds, etc m2 220 6 Slabs, etc m2 173 Finishing top surfaces of concrete smooth with a wood float/steel trowel 7 Aprons to falls, etc m2 80 Steel float 8 Tops of upstand beams, etc. m2 19 Carried Forward R Section No. 2 Bill No. 3 Concrete, Formwork & Reinforcement PUR 5603/40 Brought Forward R Extra over the above for finishing top surfaces of concrete with a brush finish. 9 Ramps, aprons, etc. m2 80 Roof outlets (cast in): 10 Geberit 359.119.00.1 pluvia roof outlet 9L/S or equally approved No 4 11 160mm Vertical outlet cast on concrete No 4 12 160mm 45 Degree side outlet cast on concrete No 4 Grooves, channels, mortices, sinkings, etc in concrete 13 50x50mm V-shaped drip groove to the bottom of concrete slabs including all formwork necessary to form grooves m 61 ROUGH FORMWORK (DEGREE OF ACCURACY II) Rough formwork to sides of aprons 14 Edges, risers, ends and reveals not exceeding 300mm high or wide m 80 SMOOTH FORMWORK (DEGREE OF ACCURACY II) Smooth formwork not exceeding 3.5m high above bearing level, to: 15 Edges, risers, ends and reveals not exceeding 300mm high or wide m 162 16 Soffits of slabs not exceeding 250mm thick m2 173 17 Sides of inverted beams (above concrete) m2 35 18 Sides and soffits of beams m2 35 Carried Forward R Section No. 2 Bill No. 3 Concrete, Formwork & Reinforcement
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a wood float 7 Surface beds, slabs, etc m2 127 8 Treads and landings of steps m2 4 ROUGH FORMWORK (DEGREE OF ACCURACY II) Rough formwork to sides 9 Edges not exceeding 300mm high m 9 Carried Forward R Section No. 3 Bill No. 3 Concrete, Formwork and Reinforcement Brought Forward MOVEMENT JOINTS ETC Expansion joints with softboard between concrete and brick surfaces 10 10mm Joints not exceeding 150mm high along edges of surface beds m 45 Saw cut joints
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a wood float 4 Aprons and drains m2 56 SMOOTH FORMWORK (DEGREE OF ACCURACY II) Smooth formwork to sides 5 Edges, risers, ends and reveals not exceeding 300mm high or wide
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a power float 6 Surface beds, slabs, etc. m2 400
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a wood float/steel trowel 6 Surface beds, slabs, etc m2 670 Smooth formwork to sides 7 Beams m2 21 8 Edges, risers, ends and reveals not exceeding 300mm high or wide m 165 Saw cut joints
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a wood float 5 Surface beds, slabs, etc m2 49 A.B.E. Duragrout non-shrink grout 6 Bedding approximately 30mm thick under 300 x 300mm base plate including chamfered edges all round No 4 SMOOTH FORMWORK (DEGREE OF ACCURACY II) Smooth formwork to sides 7 Rectangular stub columns m2 4 8 Edges exceeding 300mm high m2 15 REINFORCEMENT (PROVISIONAL) High tensile steel reinforcement to structural concrete work 9 Various diameter bars t 2.49 Carried Forward to Summary of Section No. 2 R Section No. 2 Builders Work Bill No. 3 Concrete, Formwork and Reinforcement Item No 2 4 5 R Amount Quantity Rate SECTION 3 BILL NO. 4
CONCRETE SUNDRIES. Finishing top surfaces of concrete smooth with a steel trowel 3 Surface beds, slabs, etc m2 84
