Compliance with Plans and Construction Standards Sample Clauses

Compliance with Plans and Construction Standards. All improvements constructed by CONTRACTOR within the Operating Area shall be constructed in strict compliance with detailed plans and specifications approved by COUNTY Project Coordinator. All construction shall be conducted in a good and workmanlike manner and shall conform to applicable building codes, rules, regulations and Airport’s architectural standards as contained in reference document “Xxxx Xxxxx Airport, Architect and Engineer Guide” which can be provided by Airport upon request. All work shall be done in conformity with Airport approved plans, valid building and other necessary permits and shall be acceptable to COUNTY and the appropriate governmental entity inspecting such work. CONTRACTOR shall be responsible for filing Form 7460 for any construction and/or height of construction equipment with the FAA, if required. All improvements constructed by CONTRACTOR, including the plans and specifications therefore, shall conform in all respects to the applicable statutes, ordinances, building codes, rules and regulations of the COUNTY and such other governmental authority as may have jurisdiction. COUNTY Project Coordinator's approval shall not constitute a representation or warranty as to such conformity, which shall remain CONTRACTOR’s responsibility. CONTRACTOR, at its own cost and expense, shall procure all permits necessary for such construction.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Compliance with Plans and Construction Standards. All modifications or improvements constructed by CONCESSIONAIRE within the Premises shall be constructed in strict compliance 12 with detailed plans and specifications approved by Director of OC Parks. All construction shall be conducted in a professional and competent manner and shall conform to applicable building 13 codes, rules, and regulations. All work shall be done in conformity with Director of OC Parks approved plans, valid building and other necessary permits and shall be acceptable to COUNTY 14 and the appropriate governmental entity inspecting such work.
Sample 1
Compliance with Plans and Construction Standards. All improvements constructed by TENANT within the Leased Premises shall be constructed in strict compliance with detailed plans and specifications approved by Airport Director, or designee. All construction shall be conducted in a good and workmanlike manner and shall conform to applicable building codes, rules, regulations and Airport’s architectural standards as contained in reference document “Xxxx Xxxxx Airport, Architect and Engineer Guide” and reference document “JWA TENANT Construction Manual” which can be provided by Airport upon request. TENANT is responsible to review and comply with the JWA TENANT Design Guidelines and JWA Construction manual. All work shall be done in conformity with Airport approved plans, valid building and other necessary permits and shall be acceptable to COUNTY and the appropriate governmental entity inspecting such work. TENANT shall be responsible for filing Form 7460 for any construction and/or height of construction equipment with the FAA, if required. All improvements constructed by TENANT, including the plans and specifications therefor, shall conform in all respects to the Airport approved plans, applicable statutes, ordinances, building codes, JWA TENANT Design Guidelines, JWA Construction Manual, rules and regulations of the COUNTY and such other governmental authority as may have jurisdiction, and shall be acceptable to COUNTY and the appropriate governmental entity inspecting such work. Airport Director's or designee’s approval shall not constitute a representation or warranty as to such conformity, which shall remain TENANT's responsibility. TENANT shall have the responsibility to obtain all required permits and to investigate and pay for any and all fees, including but not limited to Transportation Corridor Agency fees, if applicable, necessary for such construction. Construction by TENANT, its contractors and subcontractors, shall be coordinated with and under the direct supervision of COUNTY and shall be completed within ninety (90) days from the issuance of JWA Notice to Proceed to TENANT. (In the event TENANT fails to complete installation of improvements in a timely manner, the parties agree that COUNTY’s actual damages would be extremely difficult or impossible to determine; therefore, the parties agree that the best estimate of the COUNTY’s actual damages assessed to the TENANT is sum of Two Thousand Dollars ($2,000.00) per day until installation has been completed to the satisfaction of COUNTY.. This a...
Sample 1
Compliance with Plans and Construction Standards. All improvements constructed by TENANT within the Leased Premises shall be constructed in strict compliance with detailed plans and specifications approved by Airport Director and shall be consistent with TENANT’s Concession Improvement Plan as shown on “Exhibit D”, attached hereto. All construction shall be conducted in a good and workmanlike manner and shall conform to applicable building codes, rules, regulations and Airport’s architectural standards as contained in reference document “Xxxx Xxxxx Airport, Architect and Engineer Guide” which can be provided by Airport upon request. All work shall be done in conformity with Airport approved plans, valid building and other necessary permits and shall be acceptable to COUNTY and the appropriate governmental entity inspecting such work. TENANT shall be responsible for filing Form 7460 for any construction and/or height of construction equipment with the FAA, if required. All improvements constructed by TENANT, including the plans and specifications therefor, shall conform in all respects to the applicable statutes, ordinances, building codes, rules and regulations of COUNTY and such other governmental authority as may have jurisdiction. Airport Director's approval shall not constitute a representation or warranty as to such conformity, which shall remain TENANT's responsibility. TENANT, at its own cost and expense, shall procure all permits necessary for such construction.
Sample 1

Related to Compliance with Plans and Construction Standards

  • Compliance with Accessibility Standards All parties to this Agreement shall ensure that the plans for and the construction of all projects subject to this Agreement are in compliance with standards issued or approved by the Texas Department of Licensing and Regulation (TDLR) as meeting or consistent with minimum accessibility requirements of the Americans with Disabilities Act (P.L. 101-336) (ADA).

  • Compliance with Procurement Laws This Contract is the result of compliance with applicable procurement laws of the State of Texas. DIR issued a solicitation on the Comptroller of Public Accounts’ Electronic State Business Daily, Request for Offer (RFO) DIR-TSO-TMP-225, on February 27, 2015, for Software, including Software as a Service, Products and Related Services. Upon execution of this Contract, a notice of award for RFO DIR-TSO-TMP-225 shall be posted by DIR on the Electronic State Business Daily.

  • Compliance with Policies Each Individual Limited Partner hereby agrees that he shall comply with all policies and procedures adopted by any member of the Och-Ziff Group or which Limited Partners are required to observe by law, or by any recognized stock exchange, or other regulatory body or authority.

  • Compliance with Terms and Conditions Registrar shall comply with each of the following requirements, and further shall include in its registration agreement with each Registered Name Holder, as applicable, an obligation for such Registered Name Holder to comply with each of the following requirements:

  • Compliance with Standards Although the standards for workmanship, material, and equipment have been selected in these specifications as a basis of reference, standards and specifications of the other bank member countries and recommendations of standards international organizations will be acceptable provided they are substantially equivalent to the designated standards and provided furthermore that the contractor submits for approval detailed specifications which he proposes to use. Reference to brand names or catalog numbers if any in these specifications have been made only for that equipment for which it has been determined that a degree of standardization is necessary to maintain certain essential features. And in certain cases such references have also been made for purposes of convenience to specify the requirements, in either case offers of alternative goods, which have similar characteristics and provide performance and quality at lease equal to those specified are acceptable. If the contractor offers materials, equipment, design calculations or tests, which conform to standards other than those specified, full details of the differences between the proposed standards and that specified in so far as they affect the design or purpose of the equipment, are to be supplied by the contractor if called upon to do so by the engineer, where required by the engineer for approval purposes, the contractor shall supply, without charge, duplicate copies of the proposed standards with English translations of the relevant portions. The contractor shall have available in his place of business (or in his supplier’s works) the relevant copies of standards or codes used for the use of the Engineer.

  • Compliance with Rules and Regulations PFPC undertakes to comply with all applicable requirements of the Securities Laws and any laws, rules and regulations of governmental authorities having jurisdiction with respect to the duties to be performed by PFPC hereunder. Except as specifically set forth herein, PFPC assumes no responsibility for such compliance by the Fund or any other entity.

  • Compliance with Laws, Rules and Regulations Tenant, at its sole cost and expense, shall comply with all laws, ordinances, orders, rules and regulations of state, federal, municipal, or other agencies or bodies having jurisdiction over use, condition, and occupancy of the Leased Premises. Tenant must use and maintain the Leased Premises in a clean, careful, safe, and proper manner and in compliance with all Applicable Laws, including Applicable Laws pertaining to health, safety, disabled persons, and the environment; provided, however, that Tenant shall not be required to make any structural changes or repairs to the Leased Premises unless the need for such structural changes or repairs is caused by Tenant, its agents, employees, invitees, or others for whom Tenant is responsible pursuant to the terms and provisions of this Lease. Notwithstanding anything to the contrary contained elsewhere in this section, it is expressly agreed and understood that Tenant’s obligation to comply with all Applicable Laws does not apply to any violations of Applicable Laws that (a) were in effect and (b) were being violated or with which the Leased Premises was not in compliance immediately prior to the time Tenant accepted the Leased Premises, including without limitation any existing environmental contamination. Tenant will comply with the rules and regulations of the Leased Premises adopted by Landlord in its reasonable discretion. All such rules and regulations and changes and amendments thereto will be sent by Landlord to Tenant in writing and shall thereafter be carried out and observed by Tenant.

  • COMPLIANCE WITH APPLICABLE LAWS AND STANDARDS 9.1.1 Each party must comply with all Applicable Laws in performing their obligations under this Agreement.

  • Construction Requirements a) All Life and Safety and applicable Building Codes will be strictly enforced (i.e., tempered glass, fire dampers, exit signs, smoke detectors, alarms, etc.). Prior coordination with the Building Manager is required.

  • Compliance with Legal Requirements The grant and exercise of the Option, and any other obligations of the Company under this Agreement shall be subject to all applicable federal and state laws, rules and regulations and to such approvals by any regulatory or governmental agency as may be required. The Committee, in its sole discretion, may postpone the issuance or delivery of Shares as the Committee may consider appropriate and may require Participant to make such representations and furnish such information as it may consider appropriate in connection with the issuance or delivery of the Shares in compliance with applicable laws, rules and regulations.

Time is Money Join Law Insider Premium to draft better contracts faster.