Common use of Classification Definitions Clause in Contracts

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment • Care, maintenance and storage of all tools and equipment • Utilising of tools and equipment in support of Construction Workers Level 3 and above Classification Requirements • Application of general manual support skills • Powered Vibrating Road Roller • Powered Road Roller • Traffic Controller Group 2 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Laying Steel Fixer Soil Tester Chainman (incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 3 Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 4 All persons employed on the basis of their trade qualifications or AQF 3 qualification. Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment • Care, maintenance and storage of all tools and equipment • Utilising of tools and equipment in support of Classification Requirements Construction Workers Level 3 and above Classification Requirements • Application of general manual support skills • Powered Vibrating Road Roller • Powered Road Roller • Traffic Controller Group 2 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Laying Steel Fixer Soil Tester Chainman (incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Piling Labourer 1- Skilled labourer experienced in operating piling equipment, winches, piling leaders and shaft experienced. Group 3 Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Senior Piler- Skilled labourer with formal qualifications such as dogman, rigger certificate and capable of supervising minor projects Group 4 All persons employed on the basis of their trade qualifications or AQF 3 qualification. Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Classification Requirements Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment • equipment; Care, maintenance and storage of all tools and equipment • equipment; Utilising of skills, tools and equipment in support of Construction Workers Level those workers in Group 3 and above Classification Requirements • above; Application of general manual support skills • skills; Powered Vibrating Road Roller • up to 4 Tonne; Powered Road Roller • up to 8 Tonne; Traffic Controller Controller. Group 2 3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Laying Layer Steel Fixer Soil Tester Chainman (incl. including GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 All persons employed on the basis of having one or two Level 3 Formsetter AQF3 certificates. Form Setter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Classification Requirements Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 4 5 All persons employed on the basis of their trade qualifications (Trade Certificate, or AQF Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 qualification. AQF3 certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver Operator

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 CW1 An entry-level employee with greater than three month's experience. CW2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment • Care, maintenance and storage of all tools and equipment • Utilising of tools and equipment in support of Construction Workers Level 3 and above Classification Requirements • Application of general manual support skills • Powered Vibrating Road Roller • Powered Road Roller • Traffic Controller Group 2 CW3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Laying Steel Fixer Soil Tester Chainman (incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group CW4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 4 CW5 All persons employed on the basis of their trade qualifications (Trade Certificate, or AQF Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 qualification. AQF3 certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Classification Requirements Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 CW6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver OperatorOperator PAP

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 An employee having the skills3 • Forklift Operator Under 2000kg • Pipe Layer / Xxxxxx • Xxxxx Chaser • Pipe X-Ray Technician’s Assistant • Concrete Worker • Mobile Winch Unit • Material And Tool Storeman • Hydrostatic Pressurising Equipment Operator • Post Hole Digger / Fencer • Jackhammer Operator And Vibratory Compactor Machine Operator • Buffer And Grinder • Holiday Detector Operator • Trades Assistant • Clamp Operator • Labourer • Rubber Tyred Tractor With Power Operated Attachment • Other Non-Propelled Equipment Operators • Driver Of A Mobile Equipment Not Elsewhere Specified • Stores Labourer • Chainman • Rehabilitation Labourer • Traffic Control • Grade Checker • Labourer Not Elsewhere Classified (More Than 3 Months Experience) • Camp Attendant (Utility, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment • Carecleaner, maintenance and storage of all tools and equipment • Utilising of tools and equipment in support of Construction Workers Level 3 and above food service assistant, kitchenhand, storeperson, dining room attendant) Classification Requirements • Application of general manual support skills • Powered Vibrating Road Roller • Powered Road Roller • Traffic Controller Group 2 Rigging Scaffolding Dogging • Front End Loader 1.5m3 And Under • Steel Fixer • Mobile Crane Operator 25 Tonnes And Under • Excavator Operator 20 Tonnes And Under • Scraper Operator 20m3 And Under • Forklift Operator Over 2000kg • Water Tanker Driver • Serviceman (Non Trades) • Rigger/Dogman • Sandblaster And Wrapper • Survey Instrument Hands • Fuel and/or Service Truck Operator • Airtrack Type Drilling Machine Operator • Trucker Driver Not Else Specified • Tow Tractor Operator • Hand Wrapper Or Coater/Painter • Concrete Finisher Pipe and Conduit Laying Steel Fixer Soil Tester Chainman Group 1 • Excavator Operator Over 20 Tonnes • Formsetter • Trenching Machine Operator (incl. GPS rover operatorRock Trencher And Bucket Wheel Trencher) Bobcat Forklift Cranes up to 20 Tonne Pile • Mobile Crane Operator Over 25 Tonnes • Sideboom Operator • Bulldozer Operator • Grader Operator • Front End Loader Over 1.5m3 • Scraper Operator Over 20m3 • Rear or Bottom Dumper Over 60 Tonnes • Prime Mover / Articulated Vehicle Driver Trucks up to 20 Tonne Compactors up to 20 Tonne • Licensed Powder Monkey • Horizontal/Tunnelling Boring Machine Operator • Directional Drill Operator • Breakfast Cook / Unqualified Cook Group 3 Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 4 All persons employed on the basis of their trade qualifications or AQF 3 qualification. Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver OperatorA • Pipeline Tradespersons • Plant Special Class • Qualified Cook

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 An employee having the skills3 • Forklift Operator Under 2000kg • Pipe Layer / Xxxxxx • Xxxxx Chaser • Pipe X-Ray Technician’s Assistant • Concrete Worker • Mobile Winch Unit • Material And Tool Storeman • Hydrostatic Pressurising Equipment Operator • Post Hole Digger / Fencer • Jackhammer Operator And Vibratory Compactor Machine Operator • Buffer And Grinder • Holiday Detector Operator • Trades Assistant • Clamp Operator • Labourer • Rubber Tyred Tractor With Power Operated Attachment • Other Non-Propelled Equipment Operators • Driver Of A Mobile Equipment Not Elsewhere Specified • Stores Labourer • Chainman • Rehabilitation Labourer • Traffic Control • Grade Checker • Labourer Not Elsewhere Classified (More Than 3 Months Experience) • Camp Attendant (Utility, qualifications and competency and substantially assigned to exercise the following duties: cleaner, food service assistant, kitchenhand, storeperson, dining room attendant) Group 2 • Basic servicing maintenance surface plant and equipment Front End Loader 1.5m3 And Under • Care, maintenance and storage of all tools and equipment Steel Fixer • Utilising of tools and equipment in support of Construction Workers Level 3 and above Mobile Crane Operator 25 Tonnes And Under • Excavator Operator 20 Tonnes And Under • Scraper Operator 20m3 And Under • Forklift Operator Over 2000kg • Water Tanker Driver • Serviceman (Non Trades) • Rigger/Dogman Classification Requirements • Application of general manual support skills Sandblaster And Wrapper • Powered Vibrating Road Roller Survey Instrument Hands • Powered Road Roller Fuel and/or Service Truck Operator • Traffic Controller Group 2 Rigging Scaffolding Dogging Airtrack Type Drilling Machine Operator • Trucker Driver Not Else Specified • Tow Tractor Operator • Hand Wrapper Or Coater/Painter • Concrete Finisher Pipe and Conduit Laying Steel Fixer Soil Tester Chainman Group 1 • Excavator Operator Over 20 Tonnes • Formsetter • Trenching Machine Operator (incl. GPS rover operatorRock Trencher And Bucket Wheel Trencher) Bobcat Forklift Cranes up to 20 Tonne Pile • Mobile Crane Operator Over 25 Tonnes • Sideboom Operator • Bulldozer Operator • Grader Operator • Front End Loader Over 1.5m3 • Scraper Operator Over 20m3 • Rear or Bottom Dumper Over 60 Tonnes • Prime Mover / Articulated Vehicle Driver Trucks up to 20 Tonne Compactors up to 20 Tonne • Licensed Powder Monkey • Horizontal/Tunnelling Boring Machine Operator • Directional Drill Operator • Breakfast Cook / Unqualified Cook Group 3 Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 4 All persons employed on the basis of their trade qualifications or AQF 3 qualification. Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver OperatorA • Tradespersons • Plant Special Class • Qualified Cook

Classification Definitions. ‌ Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment equipment; • Care, maintenance and storage of all tools and equipment equipment; • Utilising of skills, tools and equipment in support of Construction Workers Level those workers in Group 3 and above Classification Requirements above; • Application of general manual support skills skills; • Powered Vibrating Road Roller up to 4 Tonne; • Powered Road Roller up to 8 Tonne; • Traffic Controller Controller. Group 2 3 * Rigging * Scaffolding * Dogging Concrete Finisher Pipe and Conduit Laying Layer Steel Fixer Soil Tester Chainman (incl. including GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 All persons employed on the basis of having one or two Level 3 Formsetter AQF3 certificates. • Form Setter • Cranes 20 to 40 Tonne • Grader up to 37kw (less than CAT 120) • Excavators up to .5 cubic metre capacity (up to 20 tonne weight) • Crawler Tractors up to 180kw (CAT D7 and below) • Scraper Loader up to 10 cubic metre capacity (less than CAT 621) • Loaders up to 130kw (up to CAT 950) • Backhoe • Trucks over 20 Tonne capacity • Compactors over 20 Tonne Classification Requirements Group 4 5 All persons employed on the basis of their trade qualifications (Trade Certificate, or AQF Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 qualification. AQF3 certificates) • Cranes 40 to 80 Tonne • Grader over 37kw (CAT 120 and above) • Excavator over .5 cubic metre capacity (above 20 tonne weight) • Crawler Tractor over 180kw (CAT D8 and above) • Scraper Loader over 10 cubic metre capacity (CAT 621 and above) • Loader over 130kw (CAT 960 and above) • Texture Curer Operator • Survey Instrument Hand (including unsupervised set out and GPS data manipulation) manipulation Group 5 6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver OperatorOperator * Where a person holds two of the three licenses listed below and is employed on the basis of their additional skill level and they are required to carry out multiple functions as licensed, then they shall be paid at the Level 4 rate of pay found in this Agreement. • Rigger - licensed pursuant to the Act and or Regulations; • Dogger - licensed pursuant to the Act and or Regulations; or • Scaffolder - licensed pursuant to the Act and or Regulations.

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Group 1 CW1 An entry-level employee with greater than three month's experience. CW2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment • Care, maintenance and storage of all tools and equipment • Utilising of tools and equipment in support of Construction Workers Level 3 and above Classification Requirements • Application of general manual support skills • Powered Vibrating Road Roller • Powered Road Roller • Traffic Controller Group 2 • Bentonite Labourer CW3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Laying Steel Fixer Soil Tester Chainman (incl. GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group CW4 All persons employed on the basis of having one or two Level 3 AQF3 certificates. Formsetter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne Classification Requirements weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 4 CW5 All persons employed on the basis of their trade qualifications (Trade Certificate, or AQF Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 qualification. AQF3 certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 Bentonite Plant operator/leading Hand CW6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver OperatorOperator Grab Operator Cutter Operator 7.2 Wages

Classification Definitions. Employees shall be classified and paid in accordance with the following classification structure. Classification Requirements New Entrant An entry-level employee who has not previously worked within the Classifications defined herein. Classification Requirements Group 1 An entry level employee with greater than three months experience. Group 2 An employee having the skills, qualifications and competency and substantially assigned to exercise the following duties: • Basic servicing maintenance surface plant and equipment • equipment; Care, maintenance and storage of all tools and equipment • equipment; Utilising of skills, tools and equipment in support of Construction Workers Level those workers in Group 3 and above Classification Requirements • above; Application of general manual support skills • skills; Powered Vibrating Road Roller • up to 4 Tonne; Powered Road Roller • up to 8 Tonne; Traffic Controller Controller. Group 2 3 Rigging Scaffolding Dogging Concrete Finisher Pipe and Conduit Laying Layer Steel Fixer Soil Tester Chainman (incl. including GPS rover operator) Bobcat Forklift Cranes up to 20 Tonne Pile Driver Trucks up to 20 Tonne Compactors up to 20 Tonne Group 4 All persons employed on the basis of having one or two Level 3 Formsetter AQF3 certificates. Form Setter Cranes 20 to 40 Tonne Grader up to 37kw (less than CAT 120) Excavators up to .5 cubic metre capacity (up to 20 tonne weight) Crawler Tractors up to 180kw (CAT D7 and below) Scraper Loader up to 10 cubic metre capacity (less than CAT 621) Loaders up to 130kw (up to CAT 950) Backhoe Trucks over 20 Tonne capacity Compactors over 20 Tonne Group 4 5 All persons employed on the basis of their trade qualifications (Trade Certificate, or AQF Bridge/Marine AQF3 with more than 12 months experience since qualifying, or three or more other Level 3 qualification. AQF3 Classification Requirements certificates) Cranes 40 to 80 Tonne Grader over 37kw (CAT 120 and above) Excavator over .5 cubic metre capacity (above 20 tonne weight) Crawler Tractor over 180kw (CAT D8 and above) Scraper Loader over 10 cubic metre capacity (CAT 621 and above) Loader over 130kw (CAT 960 and above) Texture Curer Operator Survey Instrument Hand (including unsupervised set out and GPS data manipulation) Group 5 6 Final Trim Operator Crane in excess of 80 Tonne Operation of Batchplant Pugmill Operator Concrete Paver Operator Road Base Paver OperatorOperator Group 7 Supervisors (as appointed by the Employer) Group 8 Professional staff, including surveyors and engineers.