Changes to the Specification Sample Clauses

Changes to the Specification. Immersion is entitled to request modifications in the form of changes or additions to the Specifications at anytime time during the term of this Agreement. Such requests shall be submitted by Immersion to KLSI in writing. If any such modification of the Specifications materially increases or decreases the cost or time of performance of the Services, the parties will negotiate an equitable adjustment to this Agreement. Upon receipt of Immersion's written approval, KLSI will proceed with the implementation of the prescribed changes and the Specifications and other exhibits to the Agreement shall be modified in writing accordingly to reflect such agreed upon changes and signed by both parties.
Sample 1Sample 2Sample 3
AutoNDA by SimpleDocs
Changes to the Specification. 9.2.1 If the Access Beneficiary wishes to request a change in the Specification (an “Access Beneficiary Request”), it shall promptly notify DB Cargo in writing, setting out its requirements in a level of detail which reasonably allows DB Cargo to assess the impact on the Service Facility Operating Constraints and any other relevant matters affecting the provision of Facility Services at the relevant Service Facility.
Sample 1Sample 2
Changes to the Specification. Each party is entitled to request ---------------------------- modifications in the form of changes or additions to the Specifications at any time during the term of this Agreement. Such requests shall be submitted in writing, and shall not be deemed or considered binding unless accepted by the other party in writing. If any such modification of the Specifications is agreed, the parties will negotiate an equitable adjustment to the Agreement, including the apportionment of any additional development, testing or tooling costs. Upon mutual agreement to any change to the Specifications, both parties will proceed with the implementation of the prescribed changes, and the Specifications and other Exhibits to the Agreement shall be modified accordingly to reflect such agreed upon changes.
Sample 1Sample 2
Changes to the Specification. Each party is entitled to request ---------------------------- modifications in the form of changes or additions to the Specifications at any time during the term of this Agreement. Such requests shall be submitted in writing, and shall not be deemed or considered binding unless accepted by the other party in writing. If any such modification of the Specifications is agreed, the parties will negotiate an equitable adjustment to the Agreement, including the apportionment of any additional development, testing or tooling costs. Upon mutual agreement to any change to the Specifications, both parties will proceed with the implementation of the prescribed changes, and the Specifications and other Exhibits to the Agreement shall be modified accordingly to reflect such agreed upon changes. Notwithstanding the foregoing, if the JetFax requested changes to the Specifications involve any change to the Printer Mechanism, the design responsibility for which is with third parties under contract with Xerox, Xerox shall use reasonable efforts to effect such Specification change provided that the same does not increase the cost of such Printer Mechanism or component thereof, or adversely and materially affect the Project Schedule or function of the Printer Mechanism, the Product or components thereof. In such event JetFax shall be responsible for the payment of all nonrecurring expenses involved in such change (or such pro rata portion thereof, in the further event Xerox elects to incorporate the same in its version of the Product). Notwithstanding the foregoing, JetFax shall not be responsible for any such nonrecurring expenses if JetFax requested changes are necessary for the Product to achieve Product Acceptance or to meet the Specification as changed at the request of Xerox. In the event such third party will not agree to such Specification change, Xerox shall so notify JetFax and Xerox shall have no other or further liability to JetFax as a result of such request.
Sample 1Sample 2
Changes to the Specification. 9.1 Any Specification, drawings or equipment supplied by the Company to the Supplier, or produced by the Supplier specifically for the Company in connection with the Agreement shall be the deemed to be Company Materials for the purposes of this Agreement. The Supplier shall not disclose to any third party any such Specification except as required for the purpose of the Agreement and shall return such Specification, drawings or equipment to the Company upon satisfactory completion of the Agreement.
Sample 1
Changes to the Specification. In the event that Millennium notifies Solvay of requested changes to the Specification, Solvay shall acknowledge receipt of such notice within a reasonable time, but in any event no later than [**], and Solvay will indicate the effect of such requested changes on Production Capacity and shall [**], as the case may be. After Millennium receives Solvay's response, if Millennium so requests, the Parties shall negotiate in good faith on such requested change to the Specification, which shall be subject to the mutual written agreement of both Parties, such agreement not to be unreasonably withheld or delayed.
Sample 1
Changes to the Specification. In the event that COR notifies Solvay of requested changes to the Specification, Solvay shall acknowledge receipt of such notice within a reasonable time, but in any event no later than [*]. The Specification shall not be changed without the agreement of both Parties. To the extent that changes to the Specification accomplish a change in Production Capacity, Solvay shall so notify COR, and any increases in Production Capacity created in this fashion shall not require any additional payment by COR under Article 2.4. Both parties acknowledge that such changes may have an effect on Appendices A and C.
Sample 1
AutoNDA by SimpleDocs
Changes to the Specification. 4.1 No major changes or modifications can be made by ST to the Specifications or the Wafers without the prior written authorization of Customer. Major changes and modifications by ST are defined as any product or process modification that affects product form, fit, function or reliability.
Sample 1
Changes to the Specification. The Specification in Schedule 1 hereto maybe varied from time to time. Any such variation must be such as to comply with the Product License, and agreed in writing by the quality assurance managers of each party hereto (or their appointed deputy).
Sample 1

Related to Changes to the Specification

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Packaging process shall be deemed a Specification change. No change in the Specifications shall be implemented by PCI, whether requested by Client, requested by PCI or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Pricing). PCI shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, PCI shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. PCI reserves the right to postpone effecting changes to the Specifications, or in the case of changes requested or required by any Regulatory Authority postpone Packaging under this Agreement, until such time as the parties agree to and execute the required written amendment.

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Specification Changes Upon any change in the Product Specifications, stability protocols, QC laboratory methods raw material specification or Packaging Specifications (whether initiated by Horizon or made in response to a request by sanofi-aventis that is agreed to by Horizon), including the addition of new packaging configurations, new SKUs, new formulations, or a change in either raw materials or Packaging Component supply, Horizon shall promptly advise sanofi-aventis in writing of such changes, and sanofi-aventis shall promptly advise Horizon as to any scheduling and/or price adjustments which may result from such changes. Prior to implementation of such changes, the Parties shall negotiate in good faith in an attempt to reach agreement on (a) the new Product Price for any Product which embodies such changes, (b) any amounts to be reimbursed by Horizon to sanofi-aventis as described in the next sentence of this paragraph, and (c) any other amendments to this Agreement which may be necessitated by such changes (i.e., an adjustment to the lead time for purchase orders). Horizon shall reimburse sanofi-aventis for the mutually agreed upon reasonable expenses incurred by sanofi-aventis as a result of such changes, including, but not limited to, reimbursing sanofi-aventis for its mutually agreed validation and development costs, capital expenditure costs, costs for any Packaging Components or other materials rendered unusable as a result of such changes, and cost of required stability to support a change. If during the Term Horizon amends the Product Specifications or Packaging ***Confidential Treatment Requested MANUFACTURING AND SUPPLY AGREEMENT PAGE 7 Specifications (whether voluntarily or as required by law) so as to render obsolete quantities of the Active Ingredient, Excipients and/or Packaging Components for the Product on hand at sanofi-aventis, Horizon shall (i) accept the return of all such obsolete Active Ingredient and (ii) purchase from sanofi-aventis, at sanofi-aventis’ Acquisition Cost, all such obsolete Excipients and Packaging Components obtained by sanofi-aventis pursuant to its normal procurement policies to manufacture quantities of the Product pursuant to Horizon forecasts under Section 6.1. Sanofi-aventis’ normal procurement policies for purposes of the preceding sentence of this Article 5 shall be considered to be quantities of Excipients and Packaging Components corresponding to the immediately following […***…] months of Horizon’s most recent forecasted Product demand. If a change in Specifications is initiated by sanofi-aventis and approved by Horizon, any cost associated with said change shall be borne by sanofi-aventis. In the event that a change in Specifications is initiated by Horizon or driven by a regulatory or business change, the costs associated with qualification of the change shall be paid by Horizon. The amount of the change shall be reasonable and customary and subject to written approval by Horizon, such approval not to be unreasonably withheld. Sanofi-aventis, with written agreement and approval from Horizon, will be responsible for the appropriate (cGMP) destruction of any materials covered under this Article 5, and sanofi-aventis shall be reimbursed by Horizon at the reasonable and customary approved rate.

  • AIRCRAFT CONFIGURATION The guarantees defined in Paragraphs 2 and 3 below (the “Guarantees”) are applicable to the A321 Aircraft as described in the A321 Standard Specification ***** as amended by the following SCNs:

  • Changes to Fee Structure In the event of Listing, the Company and the Advisor shall negotiate in good faith to establish a fee structure appropriate for a perpetual-life entity.

  • Changes to the Parties 30.1 Assignments and transfers by Obligors No Obligor may assign or transfer any of its rights and obligations under the Finance Documents without the prior consent of all the Lenders.

  • Changes to Services The Parties acknowledge and agree that there will be changes to the scope of the Services during the Contract Period. The Customer may amend the Stories that are comprised within the Minimum Marketable Features of a Release at any time during the Release at no additional charge and without adopting the Change Control Procedure set out in Clause 28 above provided that: the Customer shall not be entitled to make any changes to the Stories that form the subject of a Sprint following the mutual agreement by the Parties of the Sprint Plan for that Sprint; new Stories and/or changes to existing Stories may only be introduced if: existing Stories with an equivalent number of Story Points are removed; or existing Stories are reduced in size by the equivalent number of Story Points, such that the total number of Story Points for the Release remains constant throughout the Release. The Supplier shall consider any request by the Customer to increase the number of Story Points for a Release, and may, subject to the Change Control Procedure set out at Clause 28, agree to such request.

  • SERVICE LEVEL DESCRIPTION The Fund Accounting Agreement is hereby amended by deleting the Service Level Description attached thereto and replacing it in its entirety with the Service Level Description attached hereto.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

Time is Money Join Law Insider Premium to draft better contracts faster.