Certification Terms
Certification Terms Sample Clauses
Related to Certification Terms
Certification of Deletion The parties agree that the certification of deletion of Personal Data that is described in Clause 12(1) of the Standard Contractual Clauses shall be provided by VTEX to Customer only upon Customer’s request.
CERTIFICATION CLAUSES The CONTRACTOR CERTIFICATION CLAUSES contained in the document CCC 04/2017 are hereby incorporated by reference and made a part of this Agreement by this reference as if attached hereto.
Certification of Completion Certification of completion of the program will be contingent upon Resident successfully completing the core requirements of the Program, returning all property of the Medical Center such as books, equipment, etc., and having settled any other professional or financial obligations to the Medical Center. The certificate will be issued in accordance with the provisions of the ASHP Regulations on Accreditation of Pharmacy Residencies and signed by the RPD and the Chief Executive Officer of the organization. A certificate will not be issued to anyone who does not complete the program’s requirements. Core requirements to successfully complete the program include: • Possess a valid pharmacist license from the Pennsylvania State Board of Pharmacy by October 31st of the residency year. • Successful completion of core learning experiences and required longitudinal learning experiences as defined in the learning experience descriptions • Completion of all R1 goals/objectives with a status of achieved by the end of the residency. Completion of 100% of the remaining goals/objectives for the program with at least 50% of the objectives having a status as achieved. All objectives must have a minimum status of satisfactory progress. • All evaluations must be completed in accordance with ASHP Accreditation Standard as outlined in the Resident Agreement • Completion of pharmacokinetic certification by October 31 of residency year • Completion of inpatient anticoagulation certification by October 31 of residency year. • Completion of major project, which includes meeting all project deadlines and submission of written manuscript of completed project to the RAC. • Assigned projects (MUE, drug review, class review, and management project) have been completed • Presentation of at least one major CME program. • Completion of minimum staffing requirements as described in section 2.7 • Adherence to the organization’s attendance standards and as described in this document under Exhibit A.
CERTIFICATION OF AGREEMENT In accordance with Division 4 of Part VIB of the Workplace Relations Act 1996, the Commission hereby certifies the attached written agreement in this matter. This agreement shall come into force from the date of certification, being 6 May 2003, shall operate in accordance with its terms and shall remain in force until 31 October 2005. Printed by authority of the Commonwealth Government Printer <Price code 40> GLADWYN PLUMBING PTY LTD & C E P U ENTERPRISE AGREEMENT 2002-2005 PLUMBING and MECHANICAL SERVICES ENTERPRISE AGREEMENT 2002 - 2005 Subject Matter Clause number Page number Annual Leave 27 17 Application of Site Agreements 20 13 Apprentices 16 10 Certification & Date of Operation 6 3 Commitments 3 2 Compensation of Tools of Trade 35 22 Consultative Mechanisms 8 3 Co-Invest 36 23 Dispute Settlement Procedure 12 5 Hours of Work 22 13 Industry Compliance Certificate 21 14 Industry Training 15 10 Inclement Weather 14 6 Insurances 29 18 Negotiation of a Subsequent Agreement 19 12 No extra claims 18 13 Occupational Health & Safety 13 5 Objectives 2 2 Parties & Persons Bound 4 2 Payment of Wages 26 15 Picnic Day 34 22 Plumbing Industry Calendar 32 22 Public Holidays 33 22 Protective Clothing 31 20 Relationship with Parent Award & VBIA 7 3 Right of Entry 11 4 Rostered Days Off 23 14 Scope & Application 5 3 Security of Employment 37 23 Shift Work 24 15 Shop Stewards 9 4 Superannuation 28 18 Termination of Employment & Redundancy 30 20 Title 1 2 Compensation for Tools of Trade 35 22 Union Representation 10 4 Wages & Allowances 25 17 Appendix A Wage Rates & Allowances Availability Appendix B Victorian Building Industry Site Agreement Appendix C Security of Employment Arrangements
Certification of Compliance The Owner may permit the use, prior to sampling and testing, of certain materials or assemblies when accompanied by manufacturer's certificates of compliance stating that such materials or assemblies fully comply with the requirements of the contract. The certificate shall be signed by the manufacturer. Each lot of such materials or assemblies delivered to the work must be accompanied by a certificate of compliance in which the lot is clearly identified. Materials or assemblies used on the basis of certificates of compliance may be sampled and tested at any time and if found not to be in conformity with contract requirements will be subject to rejection whether in place or not. The form and distribution of certificates of compliance shall be as approved by the Owner. When a material or assembly is specified by "brand name or equal" and the Contractor elects to furnish the specified "brand name", the Contractor shall be required to furnish the manufacturer's certificate of compliance for each lot of such material or assembly delivered to the work. Such certificate of compliance shall clearly identify each lot delivered and shall certify as to:
Certification Regarding Lobbying Applicable to Grants, Subgrants, Cooperative Agreements, and Contracts Exceeding $100,000 in Federal Funds Submission of this certification is a prerequisite for making or entering into this transaction and is imposed by section 1352, Title 31, U.S. Code. This certification is a material representation of fact upon which reliance was placed when this transaction was made or entered into. Any person who fails to file the required certification shall be subject to a civil penalty of not less than $10,000 and not more than $100,000 for each such failure. The undersigned certifies, to the best of his or her knowledge and belief, that: (1) No Federal appropriated funds have been paid or will be paid by or on behalf of the undersigned, to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of congress, or an employee of a Member of Congress in connection with the awarding of a Federal contract, the making of a Federal grant, the making of a Federal loan, the entering into a cooperative agreement, and the extension, continuation, renewal, amendment, or modification of a Federal contract, grant, loan, or cooperative agreement. (2) If any funds other than Federal appropriated funds have been paid or will be paid to any person for influencing or attempting to influence an officer or employee of any agency, a Member of Congress, an officer or employee of congress, or an employee of a Member of Congress in connection with this Federal grant or cooperative agreement, the undersigned shall complete and submit Standard Form-LLL, “disclosure Form to Report Lobbying,” in accordance with its instructions. (3) The undersigned shall require that the language of this certification be included in the award documents for all covered subawards exceeding $100,000 in Federal funds at all appropriate tiers and that all subrecipients shall certify and disclose accordingly. I HAVE NOT Lobbied per above If you answered "I HAVE lobbied" to the above Attribute Question If you answered "I HAVE lobbied" to the above Attribute question, you must download the Lobbying Report "Standard From LLL, disclosure Form to Report Lobbying" which includes instruction on completing the form, complete and submit it in the Response Attachments section as a report of the lobbying activities you performed or paid others to perform. Subcontracting with Small and Minority Businesses, Women's Business Enterprises, and Labor Surplus Area Firms. Do you ever anticipate the possibility of subcontracting any of your work under this award if you are successful? IF NO, DO NOT ANSWER THE NEXT ATTRIBUTE QUESTION. . IF YES, and ONLY IF YES, you must answer the next question YES if you want a TIPS Member to be authorized to spend Federal Grant Funds for Procurement. NO
Certification of Contractor The Contractor shall certify, over his own signature, that the Work provided for by the Contract Documents has been completed under the terms and conditions thereof, and that the entire balance of the contract is due and payable.
CERTIFICATION REGARDING DRUG-FREE WORKPLACE REQUIREMENTS The undersigned (authorized official signing for the contracting organization) certifies that the contractor will, or will continue to, provide a drug-free workplace in accordance with 45 CFR Part 76 by:
AS9100 Certification AS9100 Certification, specifies requirements for a quality management system to demonstrate the Contractor’s ability to consistently meet the customer requirements as well as statutory and regulatory requirements for the aerospace industry. An AS9100 Certification, is not mandatory; however, Contractors who desire to compete for work within the aerospace industry are encouraged to have AS9100 Certification, during the entire term of OASIS. The Contractor shall notify the OASIS CO, in writing, if there are any changes in the status of their AS9100 Certification, and provide the reasons for the change and copies of audits from an AS9100 Certification Body, as applicable. If only part of a Contractor’s organization is AS9100, certified, the Contractor shall make the distinction between which business units or sites and geographic locations have been certified.
Certification Regarding Entire TIPS Agreement Vendor agrees that, if awarded, Vendor's final TIPS Contract will consist of the provisions set forth in the finalized TIPS Vendor Agreement, Vendor's responses to these attribute questions, and: (1) The TIPS solicitation document resulting in this Agreement; (2) Any addenda or clarifications issued in relation to the TIPS solicitation; (3) All solicitation information provided to Vendor by TIPS through the TIPS eBid System; (3) Vendor’s entire proposal response to the TIPS solicitation including all accepted required attachments, acknowledged notices and certifications, accepted negotiated terms, accepted pricing, accepted responses to questions, and accepted written clarifications of Vendor’s proposal, and; any properly included attachments to the TIPS Contract. Does Vendor agree? Yes, Vendor agrees 3 Minimum Percentage Discount Offered to TIPS Members on all Goods and Services (READ 6 CAREFULLY) Please read thoroughly and carefully as an error on your response can render your contract award unusable. TIPS Members often turn to TIPS Contracts for ease of use and to receive discounted pricing. What is the minimum percentage discount that you can offer TIPS Members off of all goods and service pricing (whether offered through Pricing Form 1, Pricing Form 2, or in another accepted format) that you offer? Only limited goods/services specifically identified and excluded from this discount in Vendor’s original proposal may be excluded from this discount. Vendor must respond with a percentage from 0%-100%. The percentage discount that you input below will be applied to your "Catalog Pricing", as defined in the solicitation, for all TIPS Sales made during the life of the contract. You cannot alter this percentage discount once the solicitation legally closes. You will always be required to discount every TIPS Sale by the percentage included below with the exception of limited goods/services specifically identified and excluded from this discount in Vendor’s original proposal. If you add goods or services to your "Catalog Pricing" during the life of the contract, you will be required to sell those new items with this discount applied.
