Borrow pits Sample Clauses

Borrow pits. No borrow pits will be allowed to be opened on the site. MATERIALS
Sample 1Sample 2Sample 3See All (10)
AutoNDA by SimpleDocs
Borrow pits. If because of an insufficiency of suitable material for use in back filling of trenches, road formation or if because of other circumstances the Engineer so agrees or orders, the Contractor shall supply such materials from borrow pits. The Contractor shall obtain the approval of the Engineer to the location of borrow pits and shall adhere to instructions in regard to the area, width, depth and slope of the borrow pits and also to the depth of overburden if any, which has to be removed. Prior to excavating materials from borrow pits, the Contractor shall strip all unsuitable overburden and lay it aside. The use as fill of this and other unsuitable material will not be permitted. After the use of a borrow pit has been finally discontinued, the overburden and any other unsuitable material previously laid aside shall be replaced in the pits, spread and levelled as required. The sides of the borrow pits shall be graded and the whole area shall be left in a tidy, regular and self-draining state, all to satisfaction of the Engineer. In case of payment for imported fill such fill will be measured solid, after compaction net as shown on Drawings. Supply of material from borrow pits shall, except where otherwise specified, be deemed to cover supply, spreading and compaction of the fill in the works and any other costs the Contractor might have including negotiations with owners, stripping and handling of overburden and the satisfactory reinstatement after completion.
Sample 1Sample 2Sample 3See All (4)
Borrow pits. No borrowing of materials is permitted on site. All imported materials shall be from commercial sources.
Sample 1Sample 2
Borrow pits a. The FMA licensee will have borrow pits identified in the operating plan and will have authority to remove trees over the pit through an approved operating plan. Volume and locations of borrow pits to be identified annually in operating plan summaries.
Sample 1Sample 2
Borrow pits. No borrow pits will be allowed to be opened on the Site.
Sample 1
Borrow pits. Contractor shall prepare a Site Fill Materials Plan. Contractor shall also identify any borrow pits identified for use and/or the proposed supplier of fill materials for the Site or the Work Site as needed to meet the Liquefaction Project’s design requirements. Contractor is responsible to assure the borrow pit is permitted for use by applicable Governmental Authorities. Contractor is to make any necessary contractual arrangements, including for mud management, with borrow pit Suppliers and shall pay all costs therewith.
Sample 1
Borrow pits. If required, fill material which includes structural fill and general fill as specified in Sections 6.1,6.2 and 6.3 shall be obtained from outside borrow pits approved by the Engineer. Samples of fill and laboratory test results shall be submitted to the Engineer for prior approval.
Sample 1
AutoNDA by SimpleDocs
Borrow pits. 4.13.1 Before opening of any borrow pits for the removal of material for forming embankments, the Contractor shall submit his proposals for the carrying out of the work, in writing, for the Engineer's approval. The proposals shall state the location of the proposed borrow-pit, the thickness of topsoil or unsuitable material to be removed, the depth of suitable material to be excavated, the type or types of material to be secured and the areas for stockpiling top soil to be reused to cover the borrow pit area. Any modification that the Engineer may require shall be made by the Contractor. The approval of the borrow pit area by the Engineer shall not relieve the Contractor of his obligations to ensure that all the material used as fill is as approved by the Engineer. The Contractor may be required to mix the materials excavated by bulldozing into stockpiles and face loading by shovel into lorries.
Sample 1

Related to Borrow pits

  • Swingline Advances In addition to the other options available to Borrower hereunder, the Swingline Commitment shall be available for Swingline Advances subject to the following terms and conditions. Swingline Advances shall be made available for same day borrowings provided that notice is given in accordance with Section 2.9 hereof. All Swingline Advances shall bear interest at the Base Rate. In no event shall the Swingline Lender be required to fund a Swingline Advance if it would increase the total aggregate outstanding Revolving Loans by Swingline Lender hereunder plus its Revolving Percentage of Facility Letter of Credit Obligations to an amount in excess of the Swingline Lender’s Revolving Commitment. No Swingline Advance may be made to repay a Swingline Advance, but Borrower may repay Swingline Advances from subsequent pro rata Advances hereunder. On the fifth (5th) day after such a Swingline Advance was made, if such Swingline Advance has not been repaid by Borrower, each Revolving Lender irrevocably agrees to purchase its Revolving Percentage of any Swingline Advance made by the Swingline Lender regardless of whether the conditions for disbursement are satisfied at the time of such purchase, including the existence of an Unmatured Default or Default hereunder provided that Swingline Lender did not have actual knowledge of such Unmatured Default or Default at the time the Swingline Advance was made and provided further that no Lender shall be required to have total outstanding Revolving Loans plus its Revolving Percentage of Facility Letters of Credit exceed its Revolving Commitment. Such purchase shall take place on the date of the request by Swingline Lender so long as such request is made by noon (Cleveland time), and otherwise on the Business Day following such request. All requests for purchase shall be in writing. From and after the date it is so purchased, each such Swingline Advance shall, to the extent purchased, (i) be treated as a Revolving Loan made by the purchasing Revolving Lenders and not by the selling Revolving Lender for all purposes under this Agreement and the payment of the purchase price by a Lender shall be deemed to be the making of a Revolving Loan by such Revolving Lender and shall constitute outstanding principal under such Revolving Lender’s Note, and (ii) shall no longer be considered a Swingline Advance except that all interest accruing on or attributable to such Swingline Advance for the period prior to the date of such purchase shall be paid when due by Borrower to the Administrative Agent for the benefit of the Swingline Lender and all such amounts accruing on or attributable to such Revolving Loans for the period from and after the date of such purchase shall be paid when due by Borrower to the Administrative Agent for the benefit of the purchasing Revolving Lenders. If prior to purchasing its Revolving Percentage of a Swingline Advance one of the events described in Section 7.7 shall have occurred and such event prevents the consummation of the purchase contemplated by preceding provisions, each Lender will purchase an undivided participating interest in the outstanding Swingline Advance in an amount equal to its Revolving Percentage of such Swingline Advance. From and after the date of each Revolving Lender’s purchase of its participating interest in a Swingline Advance, if the Swingline Lender receives any payment on account thereof, the Swingline Lender will distribute to such Revolving Lender its participating interest in such amount (appropriately adjusted, in the case of interest payments, to reflect the period of time during which such Revolving Lender’s participating interest was outstanding and funded); provided, however, that in the event that such payment was received by the Swingline Lender and is required to be returned to Borrower, each Revolving Lender will return to the Swingline Lender any portion thereof previously distributed by the Swingline Lender to it. If any Revolving Lender fails to so purchase its Revolving Percentage of any Swingline Advance, such Revolving Lender shall be deemed to be a Defaulting Lender hereunder. Notwithstanding anything to the contrary contained in this Section 2.16, the Swingline Lender shall not be obligated to make any Swingline Loan at a time when any other Lender is a Defaulting Lender, unless the Swingline Lender is satisfied that the participation therein will otherwise be fully allocated to the Lenders that are Non-Defaulting Lenders consistent with Section 10.14 and the Defaulting Lender shall not participate therein, except to the extent the Swingline Lender has entered into arrangements with the Borrower or such Defaulting Lender that are satisfactory to the Swingline Lender in its good faith determination to eliminate the Swingline Lender’s Fronting Exposure with respect to any such Defaulting Lender, including the delivery of cash collateral.

  • No Borrowing The Issuer shall not issue, incur, assume, guarantee or otherwise become liable, directly or indirectly, for any indebtedness except for the Notes.

  • Borrowing Mechanics for Revolving Loans (i) Except pursuant to Section 2.4(d), Revolving Loans that are Base Rate Loans shall be made in an aggregate minimum amount of $5,000,000 and integral multiples of $1,000,000 in excess of that amount, Revolving Loans that are Eurodollar Rate Loans shall be in an aggregate minimum amount of $5,000,000 and integral multiples of $1,000,000 in excess of that amount.

  • Borrowing Mechanics for Swing Line Loans (i) Swing Line Loans shall be made in an aggregate minimum amount of $500,000 and integral multiples of $100,000 in excess of that amount.

  • Swing Line Advances The Borrower shall repay to the Administrative Agent for the account of the Swing Line Bank and each other Revolving Credit Lender that has made a Swing Line Advance the outstanding principal amount of each Swing Line Advance made by each of them on the earlier of the maturity date specified in the applicable Notice of Swing Line Borrowing (which maturity shall be no later than the seventh day after the requested date of such Borrowing) and the Termination Date.

  • LOANS, ADVANCES, INVESTMENTS Make any loans or advances to or investments in any person or entity, except any of the foregoing existing as of, and disclosed to Bank prior to, the date hereof.

  • Advances; Mechanics Subject to the terms and conditions of this Agreement (including, without limitation, the conditions of Article VII hereof), the Company, at its sole and exclusive option, may issue and sell to the Investor, and the Investor shall purchase from the Company, shares of Common Stock on the following terms:

  • The Advances and Letters of Credit (a) Each Lender severally agrees, on the terms and conditions hereinafter set forth, to make Advances to the Borrower from time to time on any Business Day during the period from the Effective Date until the Termination Date in an aggregate amount (based in respect of any Advances to be denominated in a Committed Currency by reference to the Equivalent thereof in Dollars determined on the date of delivery of the applicable Notice of Borrowing) not to exceed such Lender’s Unused Commitment at such time. Each Borrowing shall be in an amount not less than the Borrowing Minimum or the Borrowing Multiple in excess thereof and shall consist of Advances of the same Type and in the same currency made on the same day by the Lenders ratably according to their respective Revolving Credit Commitments. Within the limits of each Lender’s Revolving Credit Commitment, the Borrower may borrow under this Section 2.01(a), prepay pursuant to Section 2.10 and reborrow under this Section 2.01(a).

Time is Money Join Law Insider Premium to draft better contracts faster.