Body Transfer and 3rd Party Body Installations Sample Clauses

Body Transfer and 3rd Party Body Installations. In the event the Customer chooses to purchase or supply a cab and chassis, or cutaway van separately, the Contractor must facilitate obtaining the required Manufacturer Certified Certificate, perform Manufacturer required pre-delivery inspection and ensure all proper tag and title documents are present during the inspection and delivery pursuant to Florida license requirements. The Contractor shall inform the Customer, upon receipt of the order, of any additional charges for installation of the Option(s), which are subject to the Department’s approval. The Department reserves the right to reject an installation charge if, within the Department’s sole discretion, the proposed installation charge does not align with standard market prices. The Manufacturer must certify that it conforms to all Federal Motor Vehicle Safety Standards (FMVSS). The facilitation of body transfer or installations must be included in the Representative Model’s price; however, an additional cost may occur for installation by the Contractor or body upfitter. The installation cost may vary due to the body configuration, however the installation price shall be included on the Price Quote Form (PQF) from the Contractor.
Sample 1Sample 2Sample 3See All (9)
AutoNDA by SimpleDocs
Body Transfer and 3rd Party Body Installations. In the event the customer chooses to purchase a cab and chassis, or cutaway van separately, the contractor must facilitate obtaining the required Manufacturer Certified Certificate, perform Manufacturer required pre-delivery inspection and ensure all proper tag and title documents are present pursuant to Florida license requirements. The final Manufacturer of the vehicle must certify that it conforms to all Federal Motor Vehicle Safety Standards (FMVSS). The facilitation of body transfer or installations must be included in the base vehicle price however; an additional cost may occur for installation by the Contractor or Body Upfitter. The installation cost may vary due to the vehicle body configuration however, the price should be included on the PQF form from the Contractor. Federal and State Standards It is the intent of the Department that all specifications herein are in full and complete compliance with all federal and State of Florida laws, requirements, and regulations applicable to the type and class of Commodities and contractual services being provided. This includes, but is not limited to, Federal Motor Vehicle Safety Standards (“FMVSS”), Occupational Safety and Health Administration (“OSHA”), Environmental Protection Agency (“EPA”) Standards, and State of Florida laws, requirements, and regulations that apply to the type and class of Commodities and contractual services being provided. In addition, if any applicable federal or State legislation becomes effective during the term of the Contract, regarding the Commodities and contractual services’ specifications, safety, and environmental requirements shall immediately become a part of the Contract. The Contractor shall meet or exceed any such requirements of the laws and regulations. If an apparent conflict exists, the Contractor and Dealer shall contact the Contract Manager immediately. Pursuant to section 3, delivery of non-conforming Commodities and contractual services, which are not remedied as required herein, may be cause for default proceedings and / or Contract termination.
Sample 1Sample 2
Body Transfer and 3rd Party Body Installations. In the event the Customer chooses to purchase or supply a cab and chassis, or cutaway van separately, the Contractor must comply with section 319.21, Florida Statutes, perform Manufacturer required pre-delivery inspection, and ensure all proper tag and title documents are present during the inspection and delivery pursuant to Florida license requirements. The Contractor shall inform the Customer, upon receipt of the order, of any additional charges for installation of aftermarket Options only. The Department reserves the right to reject an installation charge if, within the Department’s sole discretion, the proposed installation charge does not align with market prices. The Manufacturer must certify that it conforms to all Federal Motor Vehicle Safety Standards (FMVSS). The facilitation of a body transfer or 3rd party body installations must be included in the Motor Vehicle’s price; however, an additional cost may occur for installation by the Contractor or body upfitter. The installation cost may vary due to the body configuration; however, the installation price shall be included on the Price Quote Form (PQF) from the Contractor.
Sample 1Sample 2
Body Transfer and 3rd Party Body Installations. In the event the Customer chooses to purchase or supply a cab and chassis separately, the Contractor must facilitate obtaining the required Manufacturer Certified Certificate, perform Manufacturer required pre-delivery inspection, and ensure all proper tag and title documents are present pursuant to Florida license requirements. The Manufacturer must certify that it conforms to all Federal Motor Vehicle Safety Standards (FMVSS). The Contractor is responsible for facilitating body transfers and installations at no additional cost to the Customer. While facilitating body transfers and installations, the Contractor must ensure that all work is performed by a certified vendor and that all work meets or exceeds FMVSS standards. The Customer may incur an additional cost for installation by the Contractor or body upfitter. The installation cost may vary due to the body configuration; however, the price shall be included on the Price Quote Form (PQF) from the Contractor.
Sample 1Sample 2

Related to Body Transfer and 3rd Party Body Installations

  • Licenses for Permanent Installation The contractor must comply with all State mandatory licensing requirements prior to installation. Questions on licensing requirements should be directed to the State Licensing Board. Contractor must furnish and install all furniture and materials in compliance with all applicable codes, whether local, state, or federal; and that all permits or licenses required for installation will be obtained without cost to the State.

  • Delivery & Installation a) Subject to the conditions of the contract, the delivery of the goods and completion of the related services shall be in accordance with the delivery and completion schedule specified in the bidding document. The details of supply/ shipping and other documents to be furnished by the successful/ selected bidder are specified in the bidding document and/ or contract.

  • Selection of Subcontractors, Procurement of Materials and Leasing of Equipment The contractor shall not discriminate on the grounds of race, color, religion, sex, national origin, age or disability in the selection and retention of subcontractors, including procurement of materials and leases of equipment. The contractor shall take all necessary and reasonable steps to ensure nondiscrimination in the administration of this contract.

  • Obligation to Notify Owner of Existing Hazardous Materials The Contractor shall immediately notify the Owner and the Design Professional, both orally and in writing, of the presence and location of any physical evidence of, or information regarding the presence of Hazardous Materials at the Site of which it becomes aware. If the Contractor encounters Hazardous Materials on the Site the Contractor shall (i) immediately stop performance of Work or that portion of the Work affected by or affecting such Hazardous Materials; (ii) secure the contaminated area against intrusion; (iii) not disturb or remove the Hazardous Materials; (iv) not proceed, or allow any subcontractor or supplier to proceed, with any Work or other activities in the area affected by such Hazardous Materials until such materials have been properly remediated and until directed in writing to do so by the Owner; and, (v) take any other steps necessary to protect life and health and the surrounding environment. The Contractor shall be entitled to adjustment of the Contract Time and the Contract Sum pursuant to Section 5, Part 2 of these General Conditions in order to compensate for the impact of any required demolition, re-work, shutdown, delay, protection of work, disruption, and start-up resulting from the encountering of such Hazardous Materials on the Site for which the Contractor is not responsible.

  • Removal of Improvements Except as otherwise expressly agreed to by Lessor and Lessee, Lessee shall have the right to remove all Tank Farm Assets and other improvements, fixtures, equipment, materials, supplies and personal property installed by Lessee from the Premises upon the termination or expiration of this Lease, but in no event later than the date that is 120 days following the expiration or termination of this Lease (the “Removal Date”) and Lessor shall provide Lessee with access to the Premises at reasonable times until expiration of the Removal Date for the purpose of removing such items. Lessee shall provide Lessor with written notice of its election to remove the Tank Farm Assets and other improvements, fixtures, equipment, materials, supplies and personal property from the Premises at least 60 days prior to the expiration of the Lease. If Lessee elects to remove the Tank Farm Assets and Improvements from the Premises after such removal Lessee shall restore any damage to the Premises and clean the Premises so as to eliminate therefrom any accumulation (other than any de minimis and non-hazardous accumulation) of foreign substances, materials, or debris, in addition to any Environmental Cleanup that may be required under Article 10. Lessee shall pay Lessor pro rata Rent (based on the amount of Rent applicable during the last month prior to the termination or expiration) through the date of Lessee’s complete removal of all such items. During the period of such removal and clean-up, all terms and conditions of this Lease, including, the indemnity and insurance provisions shall continue in full force and effect. If Lessee elects not to remove all of the Tank Farm Assets and Improvements from the Premises on or before the Removal Date, and provided that such facilities are in good working condition at the expiration of the Term (ordinary wear and tear excepted) then, such Tank Farm Assets and Improvements shall be deemed permanently abandoned to Lessor’s sole ownership, and Lessor may remove and dispose of such facilities in any manner which Lessor may deem appropriate, without any liability whatsoever to Lessee. If Lessee elects not to remove all of the Tank Farm Assets and Improvements from the Premises on or before the Removal Date and such facilities are not in good working condition at the expiration of the term (ordinary wear and tear excepted), or Lessee fails to so remove any or all of the Tank Farm Assets and Improvements from the Premises before the Removal Date, then, in addition to all rights and remedies available at law or in equity, without any prior notice, Lessor may (but shall be under no obligation), at Lessor’s option, deem such Tank Farm Assets and Improvements to be permanently abandoned to Lessor’s sole ownership, and Lessor may remove and dispose of such facilities in any manner which Lessor may deem appropriate, without any liability whatsoever to Lessee, and Lessee shall reimburse Lessor for all costs of such removal and disposal upon demand from Lessor. If requested by Lessor, Lessee shall execute any and all documents necessary to evidence that title to the Tank Farm Assets and Improvements that Lessee does not remove by the Removal Date is in Lessor and to extinguish and remove any cloud or potential cloud on the title to the Premises and/or such facilities created by Lessee.

  • PREVAILING WAGE RATES - PUBLIC WORKS AND BUILDING SERVICES CONTRACTS If any portion of work being Bid is subject to the prevailing wage rate provisions of the Labor Law, the following shall apply:

  • Software Installation The AGENCY shall request approval in writing from the COUNTY prior to installation of any software on COUNTY computer equipment. All software installations must be supervised by COUNTY technical support staff and proof of licensing is required. Upon completion, the AGENCY is responsible for reconfiguring the computers back to the original state.

  • Delivery/Installation Instructions Due to the varying locations and circumstances involved in deliveries and installations, all deliveries and installations will be quoted on a project by project basis. All installation, labor, and or delivery charges must be shown as a separate line item on quotes and invoices. One of the following delivery methods must be specified on every Agency Purchase Order:

  • Transfer or Deletion of Student Data The Provider shall review, on an annual basis, whether the Student Data it has received pursuant to the DPA continues to be needed for the purpose(s) of the Service Agreement and this DPA. If any of the Student Data is no longer needed for purposes of the Service Agreement and this DPA, the Provider will provide written notice to the LEA as to what Student Data is no longer needed. The Provider will delete or transfer Student Data in readable form to the LEA, as directed by the LEA (which may be effectuated through Exhibit D of the DPA), within 30 calendar days if the LEA requests deletion or transfer of the Student Data and shall provide written confirmation to the LEA of such deletion or transfer. Upon termination of the Service Agreement between the Provider and LEA, Provider shall conduct a final review of Student Data within 60 calendar days. If the LEA receives a request from a parent, as that term is defined in 105 ILCS 10/2(g), that Student Data being held by the Provider be deleted, the LEA shall determine whether the requested deletion would violate State and/or federal records laws. In the event such deletion would not violate State or federal records laws, the LEA shall forward the request for deletion to the Provider. The Provider shall comply with the request and delete the Student Data within a reasonable time period after receiving the request. Any provision of Student Data to the LEA from the Provider shall be transmitted in a format readable by the LEA.

  • Undue Burden and Fundamental Alteration For any technology-related requirement in this Agreement for which the Recipient asserts an undue burden or fundamental alteration defense, such assertion may only be made by the Superintendent or by an individual designated by the Superintendent and who has budgetary authority after considering all resources available for use in the funding and operation of the service, program, or activity, and must be accompanied by a written statement of the reasons for reaching that conclusion, including the cost of meeting the requirement and the available funding and other resources. The written statement will be certified by the determining official. If such a determination is made, the certifying official will describe in the written statement how it will provide equally effective alternate access, i.e., other action that would not result in such an alteration or such burdens but would nevertheless ensure that, to the maximum extent possible, individuals with disabilities receive the same benefits or services provided by the Recipient as their nondisabled peers.

Time is Money Join Law Insider Premium to draft better contracts faster.