Blended Local Sand Sample Clauses

Blended Local Sand. Crushed Material Content: A minimum of twenty five percent (25%) crushed imported sand or crushed local stone of equivalent quality must be used to manufacture this blended sand material. Accordingly, for the purpose of this blended winter sand specification, the definition of crushed shall mean a material having fractured faces, or similar natural angles, on 50% or more of the material retained on the 2.36 mm sieve. If the blended material will not meet the above specification using a 25% crushed stone - 75% local material mixture, then the Contractor must increase the amount of crushed stone required to produce this specification. As noted in Schedule A, Section 1, the proper blend to meet the above specifications will be determined by the Department. A 100% local sand will be accepted provided it meets the gradations above and has fractured faces, or similar angles, on 50% or more of the material retained on the 2.36 mm sieve. SCHEDULE A SCHEDULE OF SPECIAL PROVISIONS
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Blended Local Sand. Crushed Material Content: A minimum of twenty five percent (25%) crushed imported sand or crushed local stone of equivalent quality must be used to manufacture this blended sand material. Accordingly, for the purpose of this blended winter sand specification, the definition of crushed shall mean a material having fractured faces, or similar natural angles, on 50% or more of the material retained on the 2.36 mm sieve. If the blended material will not meet the above specification using a 25% crushed stone - 75% local material mixture, then the Contractor must increase the amount of crushed stone required to produce this specification. As noted in Schedule A, Section 1, the proper blend to meet the above specifications will be determined by the Department. A 100% local sand will be accepted provided it meets the gradations above and has fractured faces, or similar angles, on 50% or more of the material retained on the 2.36 mm sieve. Dredged/beach sand shall not be permitted in final blended product.
Sample 1

Related to Blended Local Sand

  • Optional Extended Local Calling Scope Arrangement Traffic (5) special access, private line, Frame Relay, ATM, or any other traffic that is not switched by the terminating Party; (6) Tandem Transit Traffic; (7) Voice Information Service Traffic (as defined in Section 5 of the Additional Services Attachment); or, (8) Virtual Foreign Exchange Traffic (or V/FX Traffic) (as defined in the Interconnection Attachment). For the purposes of this definition, a Verizon local calling area includes a Verizon non-optional Extended Local Calling Scope Arrangement, but does not include a Verizon optional Extended Local Calling Scope Arrangement.

  • Extended Local Calling Scope Arrangement An arrangement that provides a Customer a local calling scope (Extended Area Service, “EAS”), outside of the Customer’s basic exchange serving area.

  • CAISO Monthly Billed Fuel Cost [for Geysers Main only] The CAISO Monthly Billed Fuel Cost is given by Equation C2-1. CAISO Monthly Billed Fuel Cost Equation C2-1 = Billable MWh ◆ Steam Price ($/MWh) Where: • Steam Price is $16.34/MWh. • For purposes of Equation C2-1, Billable MWh is all Billable MWh Delivered after cumulative Hourly Metered Total Net Generation during the Contract Year from all Units exceeds the Minimum Annual Generation given by Equation C2-2. Equation C2-2 Minimum Annual Generation = (Annual Average Field Capacity ◆ 8760 hours ◆ 0.4) - (A+B+C) Where: • Annual Average Field Capacity is the arithmetic average of the two Field Capacities in MW for each Contract Year, determined as described below. Field Capacity shall be determined for each six-month period from July 1 through December 31 of the preceding calendar year and January 1 through June 30 of the Contract Year. Field Capacity shall be the average of the five highest amounts of net generation (in MWh) simultaneously achieved by all Units during eight-hour periods within the six-month period. The capacity simultaneously achieved by all Units during each eight-hour period shall be the sum of Hourly Metered Total Net Generation for all Units during such eight-hour period, divided by eight hours. Such eight-hour periods shall not overlap or be counted more than once but may be consecutive. Within 30 days after the end of each six-month period, Owner shall provide CAISO and the Responsible Utility with its determination of Field Capacity, including all information necessary to validate that determination. • A is the amount of Energy that cannot be produced (as defined below) due to the curtailment of a Unit during a test of the Facility, a Unit or the steam field agreed to by CAISO and Owner. • B is the amount of Energy that cannot be produced (as defined below) due to the retirement of a Unit or due to a Unit’s Availability remaining at zero after a period of ten Months during which the Unit’s Availability has been zero. • C is the amount of Energy that cannot be produced (as defined below) because a Force Majeure Event reduces a Unit’s Availability to zero for at least thirty (30) days or because a Force Majeure Event reduces a Unit’s Availability for at least one hundred eighty (180) days to a level below the Unit Availability Limit immediately prior to the Force Majeure Event. • The amount of Energy that cannot be produced is the sum, for each Settlement Period during which the condition applicable to A, B or C above exists, of the difference between the Unit Availability Limit immediately prior to the condition and the Unit Availability Limit during the condition.

  • Billing Increments Unless otherwise stated in a Service Order, usage-based charges will be billed on either a per-minute or per- message basis. Service calls invoiced on a per-minute basis will have an initial minimum call duration of one (1) minute, subsequent intervals of one (1) minute each, and will be billed by rounding to the next whole minute.

  • Line Outage Costs Notwithstanding anything in the NYISO OATT to the contrary, the Connecting Transmission Owner may propose to recover line outage costs associated with the installation of Connecting Transmission Owner’s Attachment Facilities or System Upgrade Facilities or System Deliverability Upgrades on a case-by-case basis.

  • C1 Contract Price C1.1 In consideration of the Contractor’s performance of its obligations under the Contract, the Authority shall pay the Contract Price in accordance with clause C2 (Payment and VAT).

  • C4 Contract Price During Extension of the Initial Contract Period C4.1 Subject to the Pricing Schedule and the provision in clause F6 (Variation), the Contract Price shall apply for the Initial Contract Period and following an extension pursuant to clause F8 (Extension of Initial Contract Period), to the date of expiry of the extended period, or such earlier date of termination or partial termination of the agreement in accordance with the Law or the provisions of the Contract. C5 Euro

  • ESTIMATED / SPECIFIC QUANTITY CONTRACTS Estimated quantity contracts, also referred to as indefinite delivery / indefinite quantity contracts, are expressly agreed and understood to be made for only the quantities, if any, actually ordered during the Contract term. No guarantee of any quantity is implied or given. With respect to any specific quantity stated in the contract, the Commissioner reserves the right after award to order up to 20% more or less (rounded to the next highest whole number) than the specific quantities called for in the Contract. Notwithstanding the foregoing, the Commissioner may purchase greater or lesser percentages of Contract quantities should the Commissioner and Contractor so agree. Such agreement may include an equitable price adjustment.

  • Four Day Work Week Schedule i. When working under the four (4) day work week schedule, Employees shall be paid at double time (2x) the regular hourly rate for all hours worked in excess of the regular ten (10) hours per day Monday through Thursday.

  • A2 Initial Contract Period The Contract shall take effect on the Commencement Date and shall expire automatically on 30 June 2013, unless it is otherwise terminated in accordance with the provisions of the Contract, or otherwise lawfully terminated, or extended under clause F8 (Extension of Initial Contract Period).

Time is Money Join Law Insider Premium to draft better contracts faster.