Automatic transmission Sample Clauses

Automatic transmission. As soon as the driver is in the measuring zone and having reached 65 ± 2 km/h, select neutral gear and then the brake pedal is depressed sharply, holding it down as long as necessary to perform the measurement. Automatic activation of the brakes can be performed by means of a detection system made of two parts, one indexed to the track and one embarked on the vehicle. In that case braking is made more rigorously at the same portion of the track. If any of the above-mentioned conditions are not met when a measurement is made (speed tolerance, braking time, etc.), the measurement is discarded and a new measurement is made.
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
Automatic transmission. 3.2. Bumper (Full Width of Truck): Installed front and rear-step bumper shall be OEM standard (except cab and chassis units).
Sample 1Sample 2
Automatic transmission. All internally lubricated parts within the transmission case, including but not limited to, gears and shafts, bearings, bushings, bands, friction and steel clutch plates, steel drums, pump, servo unit, valve body and plate, and governor. Torque converter, lock-up converter. Transmission case is covered only if damaged by an internally lubricated part.
Sample 1
Automatic transmission. Transmission case, torque converter, all internally lubricated parts contained within the transmission case including: all sprockets, shaft bearings, bushings, drums, pumps and valves. Transmission mount; flywheel; drive plate for torque converter; transmission module; vacuum model; governor assembly; seals G gaskets.
Sample 1
Automatic transmission. In automatic transmission you do not need to be concerned about call codes and free signal recognition. Radiotelex inserts the call code of the selected destination automatically. If a coast station is involved in the transmission, Radiotelex scans the selected frequencies for a free signal and calls the coast station when a channel becomes vacant. If the destination is a ship, Radio- telex sets up the frequencies on the radio, which makes it possible to listen to the transmission frequency before initiating the transmission. An automatic transmission not requiring any operator assistance can be set up to be sent at a later time, e.g. a few hours later or the next day. Furthermore, if a transmission did not get through to the destination in the first attempt, it can be repeated automatically. See the chapter ‘Retrying auto- matic transmission’.
Sample 1
Automatic transmission. Using MDP® ATF-Cleaner/Supplement Kit (PART #02531, #02532) and/or MDP® Synthetic ATF, an ATF- Exchange Machine will evacuate the old, contaminated fluid from the transmission system (including the torque converter), while refilling the system with new fluid, and the MDP® ATF Supplement provided in the kit and/or use MDP® Synthetic ATF entirely to re-fill the system. Only lubricated parts within the automatic-transmission housing/casing are covered (EXCLUDING vehicles without an external automatic- transmission cooler).
Sample 1
Automatic transmission. If the vehicle manufacturer does not specify if and when an automatic-transmission filter must be replaced or internal removable transmission-screen cleaned, then you may want to consult your MDP® Service Location for its recommendation in this regard.
Sample 1
AutoNDA by SimpleDocs

Related to Automatic transmission

  • Transmission The Custodian and the Fund shall comply with SWIFT’s authentication procedures. The Custodian will act on FT Instructions received via SWIFT provided the instruction is authenticated by the SWIFT system. § Written Instructions. Instructions may be transmitted in an original writing that bears the manual signature of an Authorized Person(s).

  • Data Transmission Control Except as necessary for the provision of the Cloud Services in accordance with the Agreement, Personal Data must not be read, copied, modified or removed without authorization during transfer. Where data carriers are physically transported, adequate measures are implemented at SAP to provide the agreed-upon service levels (for example, encryption and lead-lined containers). Measures: • Personal Data in transfer over SAP internal networks is protected according to SAP Security Policy. • When data is transferred between SAP and its customers, the protection measures for the transferred Personal Data are mutually agreed upon and made part of the relevant agreement. This applies to both physical and network based data transfer. In any case, the Customer assumes responsibility for any data transfer once it is outside of SAP-controlled systems (e.g. data being transmitted outside the firewall of the SAP Data Center).

  • Transmissions 10.1. Personal Data transmitted by the Data Processor in connection with the Service through the Internet shall be reasonably encrypted. The Parties acknowledge, however, that the security of transmissions over the Internet cannot be guaranteed. The Data Processor will not be responsible for Data Controller’s access to the Internet, for any interception or interruption of any communications through the Internet, or for changes to or losses of Personal Data through the Internet.

Time is Money Join Law Insider Premium to draft better contracts faster.