Approval of Plans and Specifications Sample Clauses

Approval of Plans and Specifications. The Plans and Specifications will conform to the requirements and conditions set out by applicable law or any effective restrictive covenant, and to all governmental authorities which exercise jurisdiction over the Leased Premises or the construction thereon.
AutoNDA by SimpleDocs
Approval of Plans and Specifications. Neither review nor approval by or on behalf of Landlord of any Tenant’s plans nor any plans and specifications for any Tenant Alterations or any other work shall constitute a representation or warranty by Landlord, any of Landlord’s beneficiaries or any of their respective agents, partners or employees that such plans and specifications either (i) are complete or suitable for their intended purpose, or (ii) comply with Applicable Laws, it being expressly agreed by Tenant that neither Landlord, nor any of Landlord’s beneficiaries nor any of their respective agents, partners or employees assume any responsibility or liability whatsoever to Tenant or to any other person or entity for such completeness, suitability or compliance.
Approval of Plans and Specifications. The Owner agrees to approve the plans and specifications for such reconstruction or repair if the reconstruction or repair contemplated by such plans and specifications is economically feasible, and will restore the PROJECT, or the damaged portion thereof, to substantially the same condition as prior to such loss or damage and such plans and specifications conform to the applicable laws, ordinances, codes and regulations. The owner agrees that all proceeds of any applicable insurance or other proceeds received by the owner or the CM as a result of such loss or damage shall be used solely for payment of the costs, expenses, and other charges of the reconstruction or repair of the PROJECT.
Approval of Plans and Specifications. Lessee at its cost shall prepare and deliver to Lessor for its approval two (2) sets of the plans and specifications (“Tenant’s Plans”) for interior improvements to the Premises, including without limitation interior walls, plumbing, lighting, fixtures, electrical, and all other work necessary to enable Tenant to operate the Premises for the Primary Use (“Tenant’s Work”), which shall be subject to Lessor’s approval, which shall not be unreasonably withheld or conditioned. Lessor shall not be able to arbitrarily disapprove Tenant’s Plans, and shall only disapprove Tenant’s Plans if (1) the design negatively impacts the Building systems, (2) the design negatively impacts the Building structure, (3) the design is not in compliance with current building codes, or (4) the design negatively impacts the exterior appearance of the Building, or (5) the cost of removal at the end of the Lease will be excessive, unless Lessee posts sufficient security for such removal cost. Within 10 days after receipt of the Tenant Plans, Lessor shall return to Lessee one (1) set of prints of the Tenant Plans with Lessor’s modifications or its approval. If the Tenant Plans are returned to Lessee with modifications, but not bearing Lessor’s approval, the Tenant Plans shall be immediately revised by Lessee and submitted to Lessor for its approval within ten (10) days of their receipt by Lessee. Upon approval by Lessor, Lessee shall file a full and complete application for a building permit along with required fees and costs and obtain the necessary building permits. Following issuance of the building permits, Lessee shall commence construction of Tenant’s Work and diligently prosecute Tenant’s Work to completion. Lessor reserves the right to approve Lessee’s contractor and major subcontractors, but such approval shall not be unreasonably withheld or delayed. Notwithstanding Paragraph 7.4(b), Lessee need not remove any of Tenant’s Work, which Lessor expressly agrees in writing in its sole and absolute discretion need not be removed.
Approval of Plans and Specifications. Lessee shall have final approval of all plans and specifications before construction begins. Such approvals shall not be unreasonably withheld and shall be returned to Lessor within fifteen (15) calendar days of receipt from Lessor.
Approval of Plans and Specifications. Neither review nor approval by or on behalf of Landlord of any Tenant’s plans for initial tenant work in the Premises nor any plans and specifications for any Tenant alterations or any other work shall constitute a representation or warranty by Landlord, any of Landlord’s beneficiaries, the managing agent of the Building or Park or any of their respective agents, partners or employees that such plans and specifications either (i) are complete or suitable for their intended purpose, or (ii) comply with Applicable Laws, or (iii) can be completed within any particular time frame or construction schedule, it being expressly agreed by Tenant that neither Landlord, nor any of Landlord’s beneficiaries, nor the managing agent of the Building or Park nor any of their respective agents, partners or employees assume any responsibility or liability whatsoever to Tenant or to any other person or entity for such completeness, suitability, compliance or completion. Landlord represents that any work performed by Landlord prior to the Commencement Date shall be in compliance with all Applicable Laws.
Approval of Plans and Specifications. Except as otherwise expressly set forth in the Lease or the Workletter (if any), all work and all space plans, construction drawings, details, changes to the drawings must have the prior written approval of Landlord before any construction begins. Construction and design-build drawings for OTI-l, 2, 3, & 4 are to be approved in writing by the Management Office before drawings are submitted for permit. Overlaying of the ceiling lighting, mechanical, and fire sprinkler drawings is to be done before any work starts, to eliminate any conflict of installation between these trades.
AutoNDA by SimpleDocs
Approval of Plans and Specifications. BTS Company shall be responsible for constructing the tower platforms, ice bridges, towers, fencing, grounding systems, power and telephone connections to a central demarcation point within the tower compound, and a concrete equipment pad as specified by site diagrams for Horizon's equipment and battery backup ("Tower Facilities"). BTS Company shall prepare and deliver to Horizon for its approval three copies of prototype, standard plans ("Plans") and construction specifications ("Specifications") for the construction of prototype Tower Facilities. The Plans and Specifications shall be delivered to Horizon at least fourteen (14) business days prior to obtaining the building permit on a Site. Within ten (10) days after receipt of the Plans and Specifications, Horizon shall either approve such Plans and Specifications or deliver to BTS Company detailed written objections thereto. Horizon shall approve the Plans and Specifications if they meet the minimum specifications set forth by Horizon in its Search Ring; provided, however, that Horizon shall not be required to approve the Plans and Specifications if BTS Company's Plans and Specifications contemplate tower height or loading in excess of what was contemplated in Horizon's Search Ring minimum specifications, and such excess would cause a material delay in BTS Company obtaining governmental approvals with respect to the applicable Site, and such delay would materially delay Horizon's anticipated installation date for its Equipment on such Site.
Approval of Plans and Specifications. Landlord has had the opportunity to review, and Landlord has approved a preliminary site plan and rendering prepared by Paul Xxxxxxxx, Xxd. for the hotel/casino and other related improvements which Tenant intends to be constructed on the Land (collectively, the "IMPROVEMENTS"). Reductions of such Tenant's Renderings are attached to this Lease as Exhibit "B" and incorporated herein by this reference. For purposes of this Lease, "TENANT'S RENDERINGS" means the above-referenced site plan and rendering and any modifications thereof which either do not require Landlord's approval or which have been approved or deemed approved by Landlord in accordance with the terms of this Lease. Tenant shall deliver to Landlord for approval any material modification of Tenant's Renderings. Within a period of fifteen (15) days from the date of delivery of such modified Tenant's Renderings, Landlord shall either approve the same (which approval shall not be unreasonably withheld, delayed or conditioned and shall be conclusively presumed if Landlord fails to specify its objections and reasons therefor within such fifteen (15) day period) or specify its objections thereto and reasons therefor in detail by written notice delivered to Tenant on or before the end of said fifteen (15) day period. In the event Landlord shall specify objections to any modification of Tenant's Renderings hereunder during the Feasibility Period (as defined in Article 5 below), and if Landlord and Tenant are unable to resolve such objections by mutual agreement within a period of ten (10) days from the date of Tenant's receipt of written notice of such objections, tenant, at its sole option, may terminate this Lease by written notice to Landlord within five (5) days after the expiration of such ten (10) day period, in which event any remaining Security Deposit, as defined in Section 3.4 below, shall be released to Tenant. If Landlord specifies objections to a modification of Tenant's Renderings within the Feasibility Period, and if Tenant does not terminate this Lease pursuant to the preceding sentence, then Tenant shall promptly revise Tenant's Renderings to fully accommodate and conform to Landlord's written objections, subject to the terms of any written agreements between Landlord and Tenant as to the manner in which any of such objections may be accommodated to the mutual satisfaction of Landlord and Tenant. Any revision of Tenant's Renderings which is approved by Landlord shall be signed by Landlord...
Approval of Plans and Specifications. (a) In the event that Carrier has obtained Plans and Specifications for the construction the Tower Facilities, Carrier shall deliver to Tower Company the Plans and Specifications for the Tower Facilities within five (5) days of the complete execution of the Assignment. In the event that Tower Company does not approve the Plans and Specifications Tower Company shall deliver detailed written objections to the Plans and Specifications within five (5) business days of the receipt of the Plans and Specification. If Tower Company modifies the Plans and Specifications Tower Company shall prepare and deliver to Carrier for approval by Carrier three copies of any modifications to the Plans and Specifications. Any modifications to the Plans and Specifications for each Tower Facility shall be delivered to Carrier within ten (10) business days of the delivery of the Plans and Specifications to Tower Company. If no objection or modified Plans and Specifications are delivered to Carrier within the above-referenced time periods, the Plans and Specifications shall be deemed approved. Within five (5) business days after receipt of the modified Plans and Specifications, Carrier shall approve such modified Plans and Specification or deliver to Tower Company detailed written objections thereto. If Carrier fails to either affirmatively approve or disapprove the modifications to the Plans and Specifications proposed by Tower Company within the five (5) day period, Carrier shall be deemed to have effectively approved the modified Plans and Specifications.
Time is Money Join Law Insider Premium to draft better contracts faster.