Application Method Sample Clauses

Application Method. The Applicant shall submit a guarantee drawdown application and the relevant guarantee letter for the Bank’s approval provided that the guarantee to be provided falls within the aforementioned scope of guarantee.
Sample 1Sample 2Sample 3See All (5)
AutoNDA by SimpleDocs
Application Method. Table 1 shows the permissible main application methods, depending on the size and Average Daily Traffic (ADT) of each individual HFST installation sites. Manual application is permissible at sites as a secondary method where for reasons of access or geometry the mechanized equipment cannot be used, as approved by the Engineer. Do not allow the mixed Binder material to be separate, cure, dry, or otherwise xxxxxx in such a way as to impair retention and bonding of aggregate. Remove and replace any Binder that becomes contaminated at no additional expense to the Department. Immediately remove loose aggregate that falls onto any part of an active adjacent travel lane after the traffic is temporarily held. Contractor equipment and traffic are not allowed on the HFST during the curing period. Table 1 Permissible Methods of Application Average Daily Traffic Site Size (Square Yards) Main Application Method Less than 25,000 Less than 300 Hand Mixing and manual Application or Automated Continuous Application 300 and above Automated Continuous Application 25,000 and above Less than 300 Automated Continuous Application 300 and above Automated Continuous Application
Sample 1Sample 2
Application Method. 1. A party that desires to use the Services shall apply for the use of the Services by submitting the application form to NCS, after filling out the required matters on such application form and accepting the terms of this Agreement.
Sample 1
Application Method. There are two possible applying methods for this wall support technique. • Mix Polymer solution into the soil, compact the soil. Used if the solution is applied to the drill in order to mix it with the soil before its compaction. • Compact the soil and apply the polymer solution. Used if the spraying nozzles are located on another module and there´s no way to mix it with the soil.
Sample 1
Application Method. After completing promotion targets, please • contact your consultant to apply for the reward, or • send an e-mail directly to xxxxxxxxxx@xxxxxxxxxxxx.xxx (Please attach a copyof the contract) • SUBMIT your claim through CRM by clicking the banner • Settlement Method: FPG will tally the reward in cash. • Payment Schedule: 10 working days after the contract period expires. • Payment Method: Reward will be transferred to client’s bank account. • Trading FX pairs, XAUUSD, XAGUSD and CL-OIL (1000 buckets) for 1 lot on MT4 are recorded as 1 standard lot. Commodities, Stock CFDs and Crypto are not applicable. • Within the promotion period, reward can only be settled once. Settlements cannot be divided into multiple calculations and the contract ends when the settlement has been made.
Sample 1

Related to Application Method

  • Allocation Method The Plan Administrator will allocate a Plan-Designated QNEC using the following method (Choose one of a., b., c., or d.):

  • Service Providing Methodology 1.3.1 Party A and Party B agree that during the term of this Agreement, where necessary, Party B may enter into further service agreements with Party A or any other party designated by Party A, which shall provide the specific contents, manner, personnel, and fees for the specific services.

  • Collection Allocation Mechanism On the CAM Exchange Date, (a) the Commitments shall automatically and without further act be terminated as provided in Article VII, (b) each Lender shall become obligated to fund, within one Business Day, all participations in outstanding Swingline Loans held by it (it being agreed that the CAM Exchange shall not result in a reallocation of such funding obligations, but only of the funded participations resulting therefrom) and (c) the Lenders shall automatically and without further act be deemed to have made reciprocal purchases of interests in the Designated Obligations such that, in lieu of the interests of each Lender in the particular Designated Obligations that it shall own as of such date and immediately prior to the CAM Exchange, such Lender shall own an interest equal to such Lender’s CAM Percentage in each Designated Obligation. Each Lender, each person acquiring a participation from any Lender as contemplated by Section 11.04 and each Borrower hereby consents and agrees to the CAM Exchange. Each Borrower and each Lender agrees from time to time to execute and deliver to the Administrative Agent all such promissory notes and other instruments and documents as the Administrative Agent shall reasonably request to evidence and confirm the respective interests and obligations of the Lenders after giving effect to the CAM Exchange, and each Lender agrees to surrender any promissory notes originally received by it hereunder to the Administrative Agent against delivery of any promissory notes so executed and delivered; provided that the failure of any Borrower to execute or deliver or of any Lender to accept any such promissory note, instrument or document shall not affect the validity or effectiveness of the CAM Exchange. As a result of the CAM Exchange, on and after the CAM Exchange Date, each payment received by the Administrative Agent pursuant to any Loan Document in respect of the Designated Obligations shall be distributed to the Lenders pro rata in accordance with their respective CAM Percentages (to be redetermined as of each such date of payment or distribution to the extent required by the next paragraph), but giving effect to assignments after the CAM Exchange Date, it being understood that nothing herein shall be construed to prohibit the assignment of a proportionate part of all an assigning Lender’s rights and obligations in respect of a single Class of Commitments or Loans. In the event that, after the CAM Exchange, the aggregate amount of the Designated Obligations shall change as a result of the making of an LC Disbursement of either Tranche by an Issuing Bank that is not reimbursed by the applicable Borrower, then (a) each Lender of such Tranche shall, in accordance with Section 2.05(d), promptly purchase from the applicable Issuing Bank a participation in such LC Disbursement in the amount of such Lender’s Tranche One Percentage or Tranche Two Percentage, as the case may be, of such LC Disbursement (without giving effect to the CAM Exchange), (b) the Administrative Agent shall redetermine the CAM Percentages after giving effect to such LC Disbursement and the purchase of participations therein by the applicable Lenders, and the Lenders shall automatically and without further act be deemed to have made reciprocal purchases of interests in the Designated Obligations such that each Lender shall own an interest equal to such Lender’s CAM Percentage in each of the Designated Obligations and (c) in the event distributions shall have been made in accordance with the preceding paragraph, the Lenders shall make such payments to one another as shall be necessary in order that the amounts received by them shall be equal to the amounts they would have received had each LC Disbursement been outstanding immediately prior to the CAM Exchange. Each such redetermination shall be binding on each of the Lenders and their successors and assigns and shall be conclusive absent manifest error.

  • Underwriting Methodology The methodology used in underwriting the extension of credit for each Mortgage Loan employs objective mathematical principles which relate the related Mortgagor's income, assets and liabilities to the proposed payment and such underwriting methodology does not rely on the extent of the related Mortgagor's equity in the collateral as the principal determining factor in approving such credit extension. Such underwriting methodology confirmed that at the time of origination (application/approval) the related Mortgagor had a reasonable ability to make timely payments on the Mortgage Loan;

  • Accounting Method For both financial and tax reporting purposes, the books and records of the Company shall be kept on the accrual method of accounting applied in a consistent manner and shall reflect all Company transactions and be appropriate and adequate for the Company’s business.

  • Determinations to Honor Drawing Requests In determining whether to honor any request for drawing under any Letter of Credit by the beneficiary thereof, the Issuing Lender shall be responsible only to determine that the documents and certificates required to be delivered under such Letter of Credit have been delivered and that they comply on their face with the requirements of such Letter of Credit.

  • Selection of Architect/Construction Drawings Tenant shall retain the architect/space planner designated by Tenant and reasonably approved by Landlord (the “Architect”) to prepare the “Construction Drawings,” as that term is defined in this Section 3.2. Tenant shall retain the engineering consultants selected by Tenant (the “Engineers”) to prepare all plans and engineering working drawings relating to the structural, mechanical, electrical, plumbing, HVAC, life safety, and sprinkler work in the Premises, which work is not part of the Base Building. The plans and drawings to be prepared by Architect and the Engineers hereunder shall be known collectively as the “Construction Drawings.” All Construction Drawings shall comply with the drawing format and specifications reasonably determined by Landlord, and shall be subject to Landlord’s approval. Tenant and Architect shall verify, in the field, the dimensions and conditions as shown on the relevant portions of the base building plans, and Tenant and Architect shall be solely responsible for the same, and Landlord shall have no responsibility in connection therewith. Landlord’s review of the Construction Drawings as set forth in this Section 3, shall be for its sole purpose and shall not imply Landlord’s review of the same, or obligate Landlord to review the same, for quality, design, Code compliance or other like matters. Accordingly, notwithstanding that any Construction Drawings are reviewed by Landlord or its space planner, architect, engineers and consultants, and notwithstanding any advice or assistance which may be rendered to Tenant by Landlord or Landlord’s space planner, architect, engineers, and consultants, Landlord shall have no liability whatsoever in connection therewith and shall not be responsible for any omissions or errors contained in the Construction Drawings, and Tenant’s waiver and indemnity set forth in the Lease shall specifically apply to the Construction Drawings.

  • Payment Method Payment shall be made by the Contractor to the Subcontractor as follows: (choose one) ☐ - Immediately upon completion of the Services to the satisfaction of the Contractor. ☐ - Within business days after completion of the Services to the satisfaction of the Contractor. ☐ - Shall be paid on a ☐ weekly ☐ monthly ☐ quarterly ☐ other

Time is Money Join Law Insider Premium to draft better contracts faster.