Ambient Air Quality Sample Clauses

Ambient Air Quality. Air pollutants to be monitored as part of an ambient air quality monitoring program include those in Table 1.1.1 - WHO Ambient Air Quality Guidelines (See World Bank Group’s General Environmental, Health and Safety [EHS]). Table 1.1.1: WHO Ambient Air Quality Guidelines Averaging Period Guideline Value (µg/m3) Sulfur Dioxide (S02) 24-hour 125 (interim target 1) 50 (interim target 2) 20 (guideline) 10 minute 500 (guideline) Nitrogen Dioxide (N02) 1 -year 40 (guideline) 1-hour 200 (guideline) Particulate Matter (PM10) 1-year 70 (interim target 1) 50 (interim target 2) 30 (interim target 3) 20 (guideline) 24-hour 150 (interim target 1) 100 (interim target 2) 75 (interim target 3) 50 (guideline) Particulate Matter (PM2.5) 1-year 35 (interim target 1) 25 (interim target 2) 15 (interim target 3) 10 (guideline) 24-hour 75 (interim target 1) 50 (interim target 2) 37.5 (interim target 3) 25 (guideline) Ozone (O3) 8-hour daily maximum 160 (target 1) 100 (guideline) See WBG General EHS Guidelines for footnotes and additional information/ Wastewater Quality: For each facility, please provide copies of MCañuelas’s treated wastewater quality monitoring reports. Indicate if there are exceedances of host-country standards and/or IFC guideline values. Water Resource Quality: For each facility, if treated effluent is discharged to a surface water body, please provide copies of surface water quality of the receiving water body. For those facilities that obtain water from groundwater supply xxxxx, please provide copies of groundwater quality monitoring reports. Also present monitoring data regarding monthly/annual water consumption and information on groundwater static and dynamic levels. Solid wastes: For each facility, please provide copies of MCañuelas’s solid waste monitoring reports, describing the volumes of the various waste types (e.g., hazardous, domestic, recyclable, batteries, light bulbs, etc.) Please provide manifests that demonstrate that wastes are disposed at authorized/licensed facilities.
Sample 1Sample 2
AutoNDA by SimpleDocs
Ambient Air Quality. The study of baseline ambient air quality AAQ in the core area and the study area is an essential and primary requirement for assessment of the impacts on air environment due to proposed mining activity. This includes identification of specific air pollution parameters expected to have significant impacts and assessing their existing levels in ambient air within the impact zone. To assess the baseline status of ambient air quality in the study area monitoring is undertaken to ascertain the baseline pollutant concentrations in ambient air. The ambient air quality was monitored in the impact area as per MoEF&CC guidelines. The study area represents mostly rural environment. Methods of Sampling and Analysis Fine particulate Sampler APM MFC550 was used for monitoring Particulate Matter (PM2.5 and PM10); gaseous pollutants like SO2, and NO2 was collected by Gaseous Pollutant Sampler APM 433 and CO was monitored by Serinous 30 CO Analyzer with NDIR detector. Method for measurement of Particulate matter, SO2 & NO2 Method for measurement of Particulate Matter (PM10) in ambient air is done by Cyclonic Flow Technique. Particles with aerodynamic diameter less than the cut-point of the inlet are collected by a filter. Cyclones are used to suck ambient air at the monitoring locations. Non-reparable & coarse dust is separated from the air stream by centrifugal forces acting on the solid particles and these particles fall through the cyclone's conical xxxxxx and get collected in the sampling cap placed at the bottom. The fine dust (<10 microns) forming the particulate matter (PM10) passes the cyclone and is retained on the filter paper the mass of these particles is determined by the difference in filter weights prior to and after sampling. The concentration of PM10 in the designated size range is calculated by dividing the weight gain of the filter by the volume of air sampled. A tapping is provided on the suction side of the blower to provide suction for sampling air through a set of impingers for containing absorbing solutions for SO2 and NO. Samples of gases are drawn at a flow rate of 0.2 liters per minute. The APM MFC 550 is used for PM2.5. This system is a manual method for sampling fine particles (PM2.5 fraction) and is based on impactor designs standardized by USEPA for ambient air quality monitoring. Standard Gravimetric method is used for estimation of PM2.5 & PM10. Improved West and Xxxxx method (IS-5182 part-II, 1969) has been adopted for estimation of SO2 a...
Sample 1
Ambient Air Quality. The quality of air (in terms of airborne fiber content) that is present in a given space.
Sample 1
Ambient Air Quality. How many monitoring point for air emissions Levels will TransAtlantic has? Air Emissions Levels: Monitoring Point Location1 Ambient Air Parameters WBG/IFC Maximum Levels (WBG/IFC Units) TransAtlantic Performance (WBG/IFC Units) Turkey Maximum Levels (Units) 2 TransAtlantic Performance (Turkey Units) 2 Averaging Period Guidelines Value in µg/m3 Sulfur Dioxide (SO2) 24 hrs 125 (Interim target-1) 50 (Interim target-2) 20 (guideline) µg/m3 10 Minute 500 (guideline) µg/m3 NO2 1 -Year 40 (guideline) µg/m3 I-Hour 200 (guideline) µg/m3 Particulate Matter PM 10 I- year 70 (Interim target-1) 50 (Interim target-2) 30 (Interim target-3) 20 (guideline) µg/m3
Sample 1
Ambient Air Quality. To establish the baseline status of the ambient air quality in the study area, the air quality was monitored at nine locations during post-monsoon and partly winter season. The PM2.5 and PM10 are observed to vary from 14.2 µg/m3 to 45.7 µg/m3 and 28.2 µg/m3 to 72.1 µg/m3 respectively. The SO2 and NOx are observed to vary from 9.8 µg/m3 to 16.6 µg/m3 and 12.6 µg/m3 to 29.2 µg/m3 respectively.
Sample 1
Ambient Air Quality. 1. Within six months following the entry of this Agreement into force, the Polish Party shall, through the Agents, submit to the Czech Party information about anti-dust measures in the Xxxxx mine and subsequently shall implement these measures. Within the same deadline the Polish Party shall provide to the Czech Party all input data (excel files, shape files and .m3d) from 2018 used for the calculations of the dispersion study in the environmental impact assessment report which was the basis for the Decision of the Regional Director of Environmental Protection in Wroclaw of 21 January 2020 (reference WOOŚ.4235.1.2015.53) on environmental conditions.
Sample 1
Ambient Air Quality. Sample Frequency (e.g. quarterly) Ambient Air Quality Parameter World Bank Group/IFC Maximum Levels Performance In WBG/IFC Units Annual Average Host Countr Regulatory Limits and units Performance in Host Country units Annual average Monitoring Location (please specify) Particulate Matter (PM10) – 1 year PM10 – 24 hour µg/m PM2.5 – 24 hour SOx – 24 hour µg/m NOx - 1 year µg/m NOx - 1 hour µg/m Sample Frequency (e.g. quarterly) Required Laboratory Analysis for Collected Samples World Bank Group/IFC Maximum Levels Performance In WBG/IF Units Annual Average Host Country, Regulatory Limits and units Performance in Host Country units Annual Average Diesel Generator (DG) Sets Flue gas flow rate None Nm3/hr Particulate matte (PM) mg/Nm3 mg/Nm3 NOx mg/Nm3 mg/Nm3 SO2 mg/Nm3 mg/Nm3 C
Sample 1
AutoNDA by SimpleDocs

Related to Ambient Air Quality

  • HEATING, VENTILATING AND AIR CONDITIONING General Office Area: The building shall be equipped with a combination heating, ventilation and air conditioning system. The system shall have ducted supply and return air. The space above the ceiling shall not be used as a supply or return plenum. The systems shall be sized in accordance with the weather conditions identified in Chapter 13, “Energy Conservation” of the 1996 BOCA Building Code and supplemented by the “Building Code Rules”. All HVAC equipment shall be commercial or light industrial grade. If new construction it shall be installed at grade or within mechanical rooms for easy access and maintenance. If existing construction, roof mounted equipment will be considered after all other options have been exhausted, including the elimination of noise and vibration transfer to the structural members. The HVAC systems shall be zoned, with units sized and placed as required by heating and cooling loads on the building. Zoning of systems is dependent on the size, shape and orientation of the building. The HVAC system shall be divided into a minimum of 4 exterior and 1 interior temperature control zones. Return air shall be taken from the area supplied or adjacent to the area in the same temperature control zone. The ventilation and exhaust system shall be sized to maintain a positive pressure throughout the building envelope to limit air and dust infiltration. No HVAC ductwork shall be installed under the floor slab or underground.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

  • Heating and Air Conditioning Tenant shall not use any method of heating or air-conditioning, other than that supplied by Landlord, without Landlord’s prior written consent.

  • Environmental, Health and Safety i. Environment, Health and Safety Performance. Seller acknowledges and accepts full and sole responsibility to maintain an environment, health and safety management system ("EMS") appropriate for its business throughout the performance of this Contract. Buyer expects that Seller’s EMS shall promote health and safety, environmental stewardship, and pollution prevention by appropriate source reduction strategies. Seller shall convey the requirement of this clause to its suppliers. Seller shall not deliver goods that contain asbestos mineral fibers.

  • Quality Control A. Controlled Affiliate agrees to use the Licensed Marks and Name only in connection with the licensed services and further agrees to be bound by the conditions regarding quality control shown in attached Exhibit A as they may be amended by BCBSA from time-to-time.

  • Environmental, Health and Safety Matters (a) The Company has complied and is in compliance with all Environmental, Health, and Safety Requirements.

  • Transportation Management Tenant shall fully comply with all present or future programs intended to manage parking, transportation or traffic in and around the Building, and in connection therewith, Tenant shall take responsible action for the transportation planning and management of all employees located at the Premises by working directly with Landlord, any governmental transportation management organization or any other transportation-related committees or entities.

  • Waste Disposal Tenant shall store its waste either inside the Premises or within outside trash enclosures that are fully fenced and screened in compliance with all Private Restrictions, and designed for such purpose. All entrances to such outside trash enclosures shall be kept closed, and waste shall be stored in such manner as not to be visible from the exterior of such outside enclosures. Tenant shall cause all of its waste to be regularly removed from the Premises at Tenant’s sole cost. Tenant shall keep all fire corridors and mechanical equipment rooms in the Premises free and clear of all obstructions at all times.

  • Materials of Environmental Concern have not been transported or disposed of from the Properties in violation of, or in a manner or to a location that could give rise to liability under, any Environmental Law, nor have any Materials of Environmental Concern been generated, treated, stored or disposed of at, on or under any of the Properties in violation of, or in a manner that could give rise to liability under, any applicable Environmental Law;

  • Environmental, Health and Safety Laws There does not exist any violation by the Borrower or any Subsidiary of any applicable federal, state or local law, rule or regulation or order of any government, governmental department, board, agency or other instrumentality relating to environmental, pollution, health or safety matters which will or threatens to impose a material liability on the Borrower or a Subsidiary or which would require a material expenditure by the Borrower or such Subsidiary to cure. Neither the Borrower nor any Subsidiary has received any notice to the effect that any part of its operations or properties is not in material compliance with any such law, rule, regulation or order or notice that it or its property is the subject of any governmental investigation evaluating whether any remedial action is needed to respond to any release of any toxic or hazardous waste or substance into the environment, the consequences of which non-compliance or remedial action could constitute an Adverse Event.

Time is Money Join Law Insider Premium to draft better contracts faster.