Common use of Agency Installation Obligations Clause in Contracts

Agency Installation Obligations. Agency agrees to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although Flock Hardware is designed to utilize solar power, certain Designated Locations may require a reliable source of 120V or 240V AC power. In the event adequate solar power is not available, Agency is solely responsible for costs associated with providing a reliable source of 120V or 240V AC power to Flock Hardware. Flock will provide solar options to supply power at each Designated Location. If Agency refuses recommended solar options, Agency waives any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar power. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; (ii) any federal, state, or local taxes including property, license, privilege, sales, use, excise, gross receipts, or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Flock Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Flock Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment, or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), such costs to be approved by the Agency (“Agency Installation Obligations”). In the event that a Designated Location for Flock Hardware requires permits, Flock may provide the Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Flock Hardware from the temporary alternate location to the permitted location at no additional cost. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has, or shall lawfully obtain, all necessary right title and authority and hereby authorizes Flock to install the Flock Hardware at the Designated Locations and to make any necessary inspections or tests in connection with such installation.

Appears in 4 contracts

Samples: Government Agency Agreement, Government Agency Agreement, Government Agency Agreement

AutoNDA by SimpleDocs

Agency Installation Obligations. Agency agrees to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although Flock Hardware is the Units are designed to utilize solar power, certain Designated Locations may require a reliable source of 120V or 240V AC power, as described in the deployment plan. In the event adequate solar power exposure is not available, available Agency is solely responsible for costs associated with providing a reliable source of 120V or 240V AC power to Flock Hardware. Flock will provide solar options to supply power at each Designated Location. If Agency refuses recommended solar optionsthe Units, Agency waives any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar powerif necessary. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; (ii) any federal, state, state or local taxes including property, license, privilege, sales, use, excise, gross receipts, receipts or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Flock Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Flock Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment, equipment or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), such costs to be approved by the Agency (“Agency Installation Obligations”). In the event that a Designated Location for Flock Hardware a Unit requires permits, Flock may will provide the Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Flock Hardware Units from the temporary alternate location to the permitted location at no additional cost. Flock will provide options to supply power at each Designated Location. If Agency refuses alternative power supply options, Agency agrees and understands that Agency will not be subject to any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar. Flock will make all reasonable efforts within their control to minimize suspension of Flock Services. Any fees payable to Flock exclude the foregoing. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has, or shall lawfully obtain, has all necessary right title and authority and hereby authorizes Flock to install the Flock Hardware at the Designated Locations and to make any necessary inspections or tests in connection with such installation. Flock is not responsible for installation of Agency Hardware.

Appears in 2 contracts

Samples: Government Agency Agreement, Government Agency Agreement

Agency Installation Obligations. Agency agrees to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although Flock Hardware is designed to utilize solar power, certain Designated Locations may require a reliable source of 120V or 240V AC power. In the event adequate solar power is not available, Agency is solely responsible for costs associated with providing a reliable source of 120V or 240V AC power to Flock Hardware. Flock will provide solar options to supply power at each Designated Location. If Agency refuses recommended solar options, Agency waives any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar power. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; (ii) any federal, state, or local taxes including property, license, privilege, sales, use, excise, gross receipts, or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Flock Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Flock Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment, or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), such costs to be approved by the Agency (Agency Installation Obligations”). In the event that a Designated Location for Flock Hardware requires permits, Flock may provide the Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Flock Hardware from the temporary alternate location to the permitted location at no additional cost. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has, or shall lawfully obtain, all necessary right title and authority and hereby authorizes Flock to install the Flock Hardware at the Designated Locations and to make any necessary inspections or tests in connection with such installationins tallation.

Appears in 1 contract

Samples: Government Agency Agreement

Agency Installation Obligations. Agency agrees to allow Xxxxx Flock and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although Flock Hardware is the Units are designed to utilize solar power, certain Designated Locations may require a reliable source of 120V or 240V AC power, as described in the deployment plan. In the event adequate solar power exposure is not available, available Agency is solely responsible for costs associated with providing a reliable source of 120V or 240V AC power to Flock Hardware. Flock will provide solar options to supply power at each Designated Location. If Agency refuses recommended solar optionsthe Units, Agency waives any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar powerif necessary. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; (ii) any federal, state, state or local taxes including property, license, privilege, sales, use, excise, gross receipts, receipts or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Flock Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Flock Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment, equipment or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), such costs to be approved by the Agency (“Agency Installation Obligations”). In the event that a Designated Location for Flock Hardware a Unit requires permits, Flock may will provide the Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Flock Hardware Units from the temporary alternate location to the permitted location at no additional cost. Flock will provide options to supply power at each Designated Location. If Agency refuses alternative power supply options, Agency agrees and understands that Agency will not be subject to any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar. Flock will make all reasonable efforts within their control to minimize suspension of Flock Services. Any fees payable to Flock exclude the foregoing. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has, or shall lawfully obtain, has all necessary right title and authority and hereby authorizes Flock to install the Flock Hardware at the Designated Locations and to make any necessary inspections or tests in connection with such installation. Flock is not responsible for installation of Agency Hardware.

Appears in 1 contract

Samples: Government Agency Agreement

AutoNDA by SimpleDocs

Agency Installation Obligations. Agency agrees and Authorized End User agree to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although Flock Hardware is the Units are designed to utilize solar power, certain Designated Locations may require a reliable source of 120V or 240V AC power, as described in the deployment plan. In the event adequate solar power exposure is not available, . Agency is solely responsible for costs associated with providing a reliable source of 120V or 240V AC power to Flock Hardware. Flock will provide solar options to supply power at each Designated Location. If Agency refuses recommended solar optionsthe Units, Agency waives any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar powerif necessary. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; (ii) any federal, state, state or local taxes including property, license, privilege, sales, use, excise, gross receipts, receipts or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Flock Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Flock Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment, equipment or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), such costs to be approved by the Agency (“Agency Installation Obligations”). In the event that a Designated Location for Flock Hardware a Unit requires permits, Flock may will provide the Authorized End User and Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Flock Hardware Units from the temporary alternate location to the permitted location at no additional cost. Flock will provide options to supply power at each Designated Location. If Agency refuses alternative power supply options, Agency agrees and understands that Agency will not be subject to any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar. Flock will make all reasonable efforts within their control to minimize suspension of Flock Services. Any fees payable to Flock exclude the foregoing. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has, or shall lawfully obtain, has all necessary DocuSign Envelope ID: 3A890C6A-51E3-4949-98F9-1AB2666C593D right title and authority and hereby authorizes Flock to install the Flock Hardware at the Designated Locations and to make any necessary inspections or tests in connection with such installation.

Appears in 1 contract

Samples: Government Agency Agreement

Agency Installation Obligations. Agency agrees to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although Flock Hardware is designed to utilize solar power, certain Designated Locations may require a reliable source of 120V or 240V AC power. In the event adequate solar power is not available, Agency is solely responsible for costs associated with providing a reliable source of 120V or 240V AC power to Flock Hardware. Flock will provide solar options to supply power at each Designated Location. If Agency refuses recommended solar options, Agency waives any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar power. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; or (ii) any federal, state, or local taxes including property, license, privilege, sales, use, excise, gross receipts, or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Flock Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Flock Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment, or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), only if such costs to be are approved by the Agency in advance of being incurred (“Agency Installation Obligations”). In the event that a Designated Location for Flock Hardware requires permits, Flock may provide the Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Flock Hardware from the temporary alternate location to the permitted location at no additional cost. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has, or shall lawfully obtain, all necessary right title and authority and hereby authorizes Flock to install the Flock Hardware at the Designated Locations and to make any necessary inspections or tests in connection with such installation.

Appears in 1 contract

Samples: Government Agency Agreement

Time is Money Join Law Insider Premium to draft better contracts faster.