Agency Installation Obligations Sample Clauses

Agency Installation Obligations. Agency agrees to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although Flock Hardware is designed to utilize solar power, certain Designated Locations may require a reliable source of 120V or 240V AC power. In the event adequate solar power is not available, Agency is solely responsible for costs associated with providing a reliable source of 120V or 240V AC power to Flock Hardware. Flock will provide solar options to supply power at each Designated Location. If Agency refuses recommended solar options, Agency waives any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar power. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; (ii) any federal, state, or local taxes including property, license, privilege, sales, use, excise, gross receipts, or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Flock Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Flock Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment, or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), such costs to be approved by the Agency (“Agency Installation Obligations”). In the event that a Designated Location for Flock Hardware requires permits, Flock may provide the Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Flock Hardware from the temporary alternate location to the permitted location at no additional cost. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has, or shall lawfully obtain, all necessary right title and authority and hereby authorizes Flock to install the Flock Hardware at the Designated Locations and to make any necessary inspections or test...
Sample 1Sample 2Sample 3See All (10)
AutoNDA by SimpleDocs
Agency Installation Obligations. Agency agrees to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the installation work. Although the Units are designed to utilize solar power, certain Designated Locations may require a reliable source of 120V AC power, as described in the deployment plan. In the event adequate solar exposure is not available Agency is solely responsible for providing a reliable source of 120V AC power to the Units, if necessary. Additionally, Agency is solely responsible for (i) any permits or associated costs, and managing the permitting process of installation of cameras or AC power; (ii) any federal, state or local taxes including property, license, privilege, sales, use, excise, gross receipts or other similar taxes which may now or hereafter become applicable to, measured by or imposed upon or with respect to the installation of the Hardware, its use (excluding tax exempt entities), or (iii) any other supplementary cost for services performed in connection with installation of the Hardware, including but not limited to contractor licensing, engineered drawings, rental of specialized equipment or vehicles, third-party personnel (i.e. Traffic Control Officers, Electricians, State DOT-approved poles, etc., if necessary), such costs to be approved
Sample 1
Agency Installation Obligations. In the event that a Designated Location for a Unit requires permits, Flock will provide the Agency with a temporary alternate location for installation pending the permitting process. Once the required permits are obtained, Flock will relocate the Units from the temporary alternate location to the permitted location at no additional cost. Flock will provide options to supply power at each Designated Location. If Agency refuses alternative power supply options, Agency agrees and understands that Agency will not be subject to any reimbursement, tolling, or credit for any suspension period of Flock Services due to low solar. Flock will make all reasonable efforts within their control to minimize suspension of Flock Services. Any fees payable to Flock exclude the foregoing. Without being obligated or taking any responsibility for the foregoing, Flock may pay and invoice related costs to Agency if Agency did not address them prior to the execution of this Agreement or a third party requires Flock to pay. Agency represents and warrants that it has all necessary right title and authority and
Sample 1
Agency Installation Obligations. Agency agrees to allow Flock and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the
Sample 1
Agency Installation Obligations. Agency agrees to allow Xxxxx and its agents reasonable access in and near the Designated Locations at all reasonable times upon reasonable notice for the purpose of performing the
Sample 1

Related to Agency Installation Obligations

  • Delivery & Installation a) Subject to the conditions of the contract, the delivery of the goods and completion of the related services shall be in accordance with the delivery and completion schedule specified in the bidding document. The details of supply/ shipping and other documents to be furnished by the successful/ selected bidder are specified in the bidding document and/ or contract.

  • Equipment Installation In order to meet its obligations under this Agreement, a Party that owns, rents, or leases equipment (the equipment owner) may require installation of such equipment on property owned by another Party (the property owner), provided that the property is being used for an electric utility purpose and that the property owner shall not be required to do so if it would thereby be prevented from performing its own obligations or exercising its rights under this Agreement.

  • MAINTENANCE, REPAIRS, OR ALTERATIONS The Tenant shall, at their own expense and at all times, maintain premises in a clean and sanitary manner, and shall surrender the same at termination hereof, in as good condition as received, normal wear and tear excepted. The Tenant may not make any alterations to the leased premises without the consent in writing of the Landlord. The Landlord shall be responsible for repairs to the interior and exterior of the building. If the Premises includes a washer, dryer, freezer, dehumidifier unit and/or air conditioning unit, the Landlord makes no warranty as to the repair or replacement of units if one or all shall fail to operate. The Landlord will place fresh batteries in all battery-operated smoke detectors when the Tenant moves into the premises. After the initial placement of the fresh batteries it is the responsibility of the Tenant to replace batteries when needed. A monthly "cursory" inspection may be required for all fire extinguishers to make sure they are fully charged.

  • Maintenance, Alteration and Repair (a) Resident is responsible for and agrees to take good care of the premises, fixtures and all common areas. Resident may not remove any of Owner’s property and will not perform any repairs, upgrades, painting, wallpapering, electric changes or other alterations of the premises without prior written consent from Owner. Resident will be responsible for damage from waste stoppages caused by foreign or improper objects or improper use in lines serving bathrooms, damage to fixtures, appliances, doors, windows, screens, damage from water faucets left on or from doors left open, and repairs or replacements to alarm devices necessitated by misuse or damage by Resident and/or guests. Extraordinary appliances or furnishings such as satellite dishes, hot tubs, pool tables, water beds or high utility-consuming devices may not be installed or placed on the premises or anywhere at the Property without Owner’s prior written consent, in its sole discretion. SAMPLE

  • Maintenance, Repairs and Alterations Landlord hereby covenants that the Premises shall be in reasonably good and usable condition as of the effective date of this Agreement. Replacements made by Landlord, if any, shall belong to it. Landlord shall keep access to the Premises free and clear of any and all obstructions including snow and ice. ** Portions of this agreement have been omitted and filed separately with the SEC pursuant to a confidential treatment request CONFIDENTIAL EXECUTION VERSION In the event of an emergency, Tenant shall have the right to perform any obligation of Landlord under this Agreement and recover from Landlord any reasonable amounts so expended by Tenant within thirty (30) days of the date of demand or, in the alternative, to offset amounts so expended against Rent. Landlord shall, at its sole expense, make structural repairs and replacements to the footings, foundation and structural elements of walls and roofs of the Premises and also shall be responsible for maintenance, repairs and replacements, at its sole expense, of heating, ventilating, air conditioning systems, plumbing systems, and electrical systems, provided, however, that Tenant, at its sole expense, shall be responsible for maintenance, repairs and replacements regarding the irrigation system on the Premises as well as Tenant's occupancy costs as described above in Section 4 of this Agreement and shall also be responsible for maintenance, repairs or replacements necessitated by Tenant's actions. Contact information for the Landlord in case of any maintenance, repair or replacement issues is as follows: [**]1 Additions, improvements and alterations made by Tenant, whether temporary or permanent in nature, shall be subject to the prior approval of Landlord and upon completion shall belong to Tenant, provided that removal may be made without damage to the Premises at the expiration of the Agreement term. If removal of the improvements or alterations would cause damage to the Premises, said improvements and alterations shall automatically become the property of Landlord. Tenant, at its sole expense, shall be responsible for maintenance, repairs and replacements of any additions, improvements or alterations made by Tenant on, in or to the Premises. Tenant shall keep the Premises in good order, repair and condition at all times during the Agreement term, except for ordinary wear and tear.

  • Installation, Maintenance, Testing and Repair Unless otherwise agreed in writing by the Parties, to the extent required by Applicable Law, Interconnection provided by a Party shall be equal in quality to that provided by such Party to itself, any subsidiary, affiliates or third party. If either Party is unable to fulfill its obligations under this Section 14.2, it shall notify the other Party of its inability to do so and will negotiate alternative intervals in good faith. The Parties agree that to the extent required by Applicable Law, the standards to be used by a Party for isolating and clearing any disconnections and/or other outages or troubles shall be at parity with standards used by such Party with respect to itself, any subsidiary, affiliate or third party.

  • Installation Waiver Company will waive the one-time installation charges associated with the implementation of Services within the 48 contiguous States of the U.S. provided under this Agreement except for the following services: (i) eDSL, (ii) VPN, (iii) Internet Dedicated OC3, OC12, OC48, Gig-E, (iv) PTT / third party services (including International Access and Company International), (v) Data Center, (vi) Paging, (vii) Managed Services, (viii) CPE, (ix) Enhanced Call Routing, (x) Local Disaster Recovery, (xi) Audio, Video and Net Conferencing, (xii) Voice over IP Services, (xiii) Security Services, (xiv) Non-Listing/Non-Published Service, (xv) Telecommunications Service Priority, and (xvi) Services provided by Company incumbent local exchange carriers (“ILECs”) or by Cellco Partnership and its affiliates d/b/a Company Wireless. Usage charges, monthly recurring charges, expedite charges, change charges, surcharges, charges for an unlisted or non-published number, any charges imposed by third parties (including access, egress, jack, or wiring charges), taxes or tax-like surcharges, or other Governmental Charges will not be waived.

  • INSTALLATION AND REMOVAL Show Management reserves the right to fix the time for the installation of a booth prior to the Show opening and for its removal after the conclusion of the Show. Installation of all exhibits must be fully completed by the opening time of the exposition. Any space not claimed and occupied three hours prior to opening, may be resold or reassigned without refund. No exhibitor will be allowed to dismantle or repack any part of his exhibit until after the closing of the Show. 6.

  • No Renovation or Installation The alteration or renovation of the Residence facilities, furniture, fixtures, or equipment supplied in the Room is not permitted. The lock(s) provided by the Institution are the only locks to be used to secure the door to the Room. No other locks may be installed by the Resident and the Resident may not change the keying of the lock(s) which are provided. Unauthorized changes to temperature settings or duct or diffuser settings in the Room, and any attempt to make changes to the heating system in the Room are prohibited. The Resident may not install any electrical equipment which will overload the capacity of a circuit. Altering or otherwise tampering with electrical systems is prohibited. The Resident may not install furnishings or equipment of any kind (including and not limited to; shelving, light fixtures, audio or visual equipment, satellite dishes and radio or television antenna(e)), without the prior written consent of the Manager. If any such furnishing or equipment is installed without the Manager’s consent, the Resident will immediately remove it after notice from the Manager, failing which the Manager may remove the furnishing or equipment at the expense of the Resident without further notice and without liability to the Resident for any damage to the furnishing or equipment so removed. The Resident is responsible to pay the costs of repairing all damage to the Room or Residence caused by the installation and removal of any furnishing or equipment installed by the Resident, whether installed with or without the Manager’s consent. The Resident also is liable for any damage to property of others and for any injury to or death of any person caused by the installation, existence or removal of any furnishing or equipment installed by the Resident, whether installed with or without the Manager’s consent.

  • REPAIRS AND ALTERATIONS 5.1 The tenant agrees:-

Time is Money Join Law Insider Premium to draft better contracts faster.