Adjustable Wrench. All tools and equipment owned by the Employer but furnished and supplied to the Employee will be used and maintained as directed. The xxxxxxx will be responsible to instruct the Employees as to the correct and safe use of such equipment. The Employer agrees to provide facilities capable of being locked for Employees to keep their tools in.
Adjustable Wrench. 7. Needle Nose Pliers 3rd year S&C Apprentice Tool list 1. Tone Generator
Adjustable Wrench. ½ LB. & 1 LB. Ball Pein Hammer 10 PC. Screwdriver Set 3 Robertsons 4 Round Shank 1/4 X 4, 3/8 X 8, 5/16 X 6, 3/8 X 10 3 Xxxxxxxx 3/16 X 3, 5/16 X 6, 1/4 X 4 Chisels 5/16" Cut, 3/4" Cut, ½“ Cut Punches
Adjustable Wrench. 1 Standard/Metric/Shallow/Deep 1/4" Drive Socket Wrench Set 1 Standard/Metric/Shallow/Deep 3/8" Drive Socket Wrench Set 1 Standard 1/2" Drive Socket Wrench Set (up to 1-1/8")
Adjustable Wrench. I Large Screwdriver; 8” shank, 5” handle 1 Pair 9" Offset Cutting Pliers 1 Ball Peen Hammer 1 - 6’ Folding Wood Rule 1 Nut & Bolt Bag I Ratchet handle with sockets (sizes as required) 1 Spud Wrench
Adjustable Wrench. Large Screwdriver, 8" shank, 5" handle Pair 9" Offset Cutting Pliers Ball Peen Hammer
Adjustable Wrench. 1 Bull Pin
Adjustable Wrench. Required Tools for Wrench Pipe Wrench Combination Wrench Set, Piece Combination Wrench Set 5/16" Wrench Set, Open End, Degree, Ignition Wrench Set 15/64" 11/32" (6 pieces) Vise Grips, Standard Pliers, Straight Needle Nose Grips, Curved Jaw I Pliers, Bent Needle Nose Pliers, Interlocking Joint (water pump pliers) Pliers, Diagonal Cutter Pliers, 8". Slip Joint Pliers, Interlocking Joint Pliers, Combination Pliers, Snap Ring (large) Pliers, Snap Ring (small) Straight Needle Nose I I
Adjustable Wrench. 4th Year Apprentice All the tools required for 3rd year apprentices and the tools list below: • Set – Open/Box End Wrenches – 1/4 – 1” • Socket Set • Multimetre Complete with Amp Metre Journeyman • Toolbox • 9” Lineman’s Pliers • Side Cutters • Needle Nose Pliers • 1 pr. Channellock Pliers • Wire Strippers • Green, Red and Black Xxxxxxxxx Drivers • Small and Medium Slot Drivers • Small and Medium Xxxxxxx’s Drivers • 25’ Imperial/Metric Tape Measure • 12” Hack Saw • Claw Hammer • Voltage Tester (600V) • Tool Pouch (wide belt) • Apron • Dry Wall Saw • Small Magnetic Level • 10” Adjustable Wrench • Scratch Awl • Taps – 6/32, 8/32, 1/4 • Tin Snips • Flashlight and Batteries • 8” Wood Chisel • Xxxxx Key Sets • Nut Drivers – 1/4 – 5/16 • Vise Grips • Wire Crimpers • 5lb. Xxxxxx • Chalk Line • Set – Open/Box End Wrenches – 1/4' – 1” • Socket Set • Multimetre Complete with Amp Metre • Large Battery Hammer Drill • Battery Sawzall PLUMBER TOOL AND EQUIPMENT LIST 1st Year Apprentice • Toolbox • Side Cutters • Needle Nose Pliers • 2 pr. Channel Lock Pliers • Green, Red and Black Xxxxxxxxx Drivers • Small and Medium Slot Drivers 2nd Year Apprentice • Small and Medium Xxxxxxx’s Drivers • 8m/26’ Imperial/Metric Tape Measure • 12” Hack Saw • Straight Claw Hammer • Dry Wall Saw • 9” Torpedo Magnetic Level All the tools required for 1st year apprentices and the tools listed below: • Taps – 6/32, 8/32, 1/4 • Tin Snips • Flashlight and Batteries • 8” Wood Chisel • Xxxxx Key Sets • Nut Drivers – 1/4 – 5/16 • Vise Grips • 5lb. Xxxxxx • Pipe Wrench – 14” and 18” 3rd Year Apprentice All the tools required for 2nd year apprentices and the tools listed below: • Chalk Line • 10” Adjustable Wrench • Torch Set • 24” Pipe Wrench 4th Year Apprentice All the tools required for 3rd year apprentices and the tools list below: • Set – Open/Box End Wrenches – 1/4 – 1” • Socket Set Journeyman • Toolbox • Side Cutters • Needle Nose Pliers • 2 pr. Channellock Pliers • Green, Red and Black Xxxxxxxxx Drivers • Small and Medium Slot Drivers • Small and Medium Xxxxxxx’s Drivers • 25’ Imperial/Metric Tape Measure • 12” Hack Saw • Claw Hammer • Dry Wall Saw • Small Magnetic Level • 10” Adjustable Wrench • Scratch Awl • Taps – 6/32, 8/32, 1/4 • Tin Snips • Flashlight and Batteries • 8” Wood Chisel • Xxxxx Key Sets • Nut Drivers – 1/4 – 5/16 • Vise Grips • 5lb. Xxxxxx • Chalk Line • Set – Open/Box End Wrenches – 1/4' – 1” • Socket Set • Large Battery Hammer Drill • Battery Sawzall • Xxxx Xxxxxx – 14”, 1...
Adjustable Wrench. Striker Screwdriver Set: Red & Black Xxxxxxxxx, Small and Medium Philips, Xxxxxx Xxxx 0" Xxxx Xxxxxxx 0 - Xxxxx Xxxxxx 1 - 3" Pipe Cutters 2 - 18" Pipe Wrenches 1 - Drywall Saw 1 - Set Wrenches 1/4" - 1" 1 - 18" Cold Chisel
