Accrual System Sample Clauses

Accrual System. The PTO formula was devised for an employee who works 2080 hours per year to pool 48 hours (6 days) of holiday pay, 24 hours (3 days) of initial sick days, and vacation and personal day pay into one bank to be used for holiday pay, initial sick pay (including doctor, dentist and eye appointments and care of a sick child or family member in accordance with applicable federal or state laws), vacations, family emergencies, religious observances, and other excused elective absences. PTO shall begin accruing as of the first day of employment; provided PTO shall not be used (except in the case of an Employer holiday) or subject to being cashed out until completion of probation. Employees shall accrue leave based on hours worked, low census hours, education hours, bereavement leave hours, holiday worked, and PTO and EII hours, and overtime hours up to 80 hours per pay period, in accordance with the following schedule: Years of Service Per Hour Max. Annual Accumulation Total Accumulation 0-5 yrs. .0923 192 hours 288 hours 5-15 yrs. .1154 240 hours 360 hours 15+ yrs. .1346 280 hours 420 hours Extended Illness Insurance (EII) shall begin accruing the first day of employment at the rate of .0346 per worked hour and low census hour regardless of years of service. The rate is equivalent to nine days per year (72 hours) for an employee who works 2080 hours per year. EII will be carried over from year to year to a maximum of 720 hours accumulated hours. EII is to be used for illness, doctor, dental or eye appointments, care of an ill child under the age of 18, maternity leave, or any other health related absences. When a Registered Nurse has unused EII in excess of 720 hours on November 30, s/he will receive payment of 50% of said excess unused hours at his/her base hourly rate of pay, exclusive of differentials and premium pays, to be paid on the last pay check of the calendar year. Example: If you have 792 hours of EII on November 30, 2009, you will be cashed out of your excess EII hours. On your last paycheck of the calendar year, you will receive payment for 36 hours of EII at your base rate. Your EII balance will be reduced by 72 hours to 720 hours to begin the new year. PTO may only accumulate to 1-1/2 the amount earned per year. Employees may convert up to 3 PTO days to EII days annually. PTO days not used on a timely basis or transferred to the employee's EII will be lost. Regular part-time employees are entitled to holiday, initial sick days, etc., with the opti...
AutoNDA by SimpleDocs
Accrual System. Employees may accrue 15, 30, 45, or 60 days of sick leave based upon their election and written request. Change of option to increase total accrual may be accomplished at anytime by the employee in the following manner: Accrual account may be increased at any time by total number of days earned during the year (1 Jul - 30 Jun) or six (6) days a year at the employee’s written election (accrual increase). Employee’s accrual change options: 15 to 30 days 30 to 60 days 30 to 45 days 45 to 60 days
Accrual System. Vacation Accrual for Full Time Employees. An employee will receive a vacation accrual on the first pay date of a month if the employee has any time worked or paid time (as defined below) in the pay period that is paid on that pay date. The accrual on the first pay date of a month will be for that month, and will equal 1/12th of the current annual accrual (which is based on 2080 hours worked). The accrual process for employees who have absences from work will be based on whether the employee is paid for any time during the pay period that is paid on the first pay date in the month. “Paid time” includes time paid as if the employee had worked, including supplementation of S&A or workers compensation benefits as provided in the contract, but not including the S&A or workers compensation benefits themselves. Upon termination, vacation payout will still occur. As at present, payout of banked vacation time upon termination of employment does not result in additional vacation accrual. Vacation Accrual for Part-time Employees . Part-time unit employees will accrue vacation based on one of three possible categories of weekly hours: • 22 hours per week category = accrual assignment for up to 22 hours per week • 29 hours per week category = accrual assignment for 23 to 29 hours per week • 32 hours per week category = accrual assignment for 30+ hours per week In November of 2018 and each subsequent year, an employee’s category for the next calendar year will be determined as follows. • For each part-time employee who has been employed in that status for at least 13 full pay periods, ending with the last pay period that ends in November, the category for the next calendar year will be determined based on the employee’s average weekly hours during the period from the first pay period ending in the previous December through the last pay period ending in November. • A new part-time employee will be in the 29-hour category until they have been employed in that status for 13 full pay periods as of the end of the last pay period that ends in November, after which their category for the next calendar year will be based on the average weekly hours calculation. Average weekly hours will include both time worked, and paid time as described above under “CGI Vacation Accrual for Full Time Employees”. Average hours will be rounded up to the nearest hour (for example, 22.01 average hours will be rounded up to 23 hours). The monthly accrual will be awarded on the same day as above fo...
Accrual System. Employees shall be credited with forty (40) hours of sick leave front loaded each year and then two and sixteen one-hundredths (2.16) hours for each full pay period worked. Sick leave may be accrued without limit, except as provided for conversion to retirement.
Accrual System. Employees shall be credited with eight (8) hours of accumulated sick leave for each full calendar month actively employed by the City. All regular employees and all probationary employees (after 30 days employment) are allowed sick leave for non-occupational disability. Sick leave may be accrued without a limit, except as provided for conversion to retirement.

Related to Accrual System

  • Unbundled Channelization (Multiplexing) 5.7.1 To the extent NewPhone is purchasing DS1 or DS3 or STS-1 Dedicated Transport pursuant to this Agreement, Unbundled Channelization (UC) provides the optional multiplexing capability that will allow a DS1 (1.544 Mbps) or DS3 (44.736 Mbps) or STS-1 (51.84 Mbps) Network Elements to be multiplexed or channelized at a BellSouth central office. Channelization can be accomplished through the use of a multiplexer or a digital cross-connect system at the discretion of BellSouth. Once UC has been installed, NewPhone may request channel activation on a channelized facility and BellSouth shall connect the requested facilities via COCIs. The COCI must be compatible with the lower capacity facility and ordered with the lower capacity facility. This service is available as defined in NECA 4.

  • Unbundled Sub-Loop Concentration System (USLC 2.9.1 Where facilities permit and where necessary to comply with an effective Commission order, BellSouth will provide <<customer_name>> with the ability to concentrate its sub-loops onto multiple DS1s back to the BellSouth Central Office. The DS1s will then be terminated into <<customer_name>>’s collocation space. TR-008 and TR303 interface standards are available.

  • Maintenance Programme 17.4.1 On or before COD and no later than 45 (forty five) days prior to the beginning of each Accounting Year during the Operation Period, as the case may be, the Concessionaire shall provide to the Authority and the Independent Engineer, its proposed annual programme of preventive, urgent and other scheduled maintenance (the “Maintenance Programme”) to comply with the Maintenance Requirements, Maintenance Manual and Safety Requirements. Such Maintenance Programme shall include:

  • Unbundled Loop Concentration (ULC) System 2.5.1 BellSouth will provide to <<customer_name>> Unbundled Loop Concentration (ULC). Loop concentration systems in the central office concentrate the signals transmitted over local loops onto a digital loop carrier system. The concentration device is placed inside a BellSouth central office. BellSouth will offer ULC with a TR008 interface or a TR303 interface.

  • Unbundled Sub-Loop Feeder 2.8.4.1 Unbundled Sub-Loop Feeder (USLF) provides connectivity between BellSouth's central office and cross-box (or other access point) that serves an end user location.

  • Distribution System The Transmission Provider's facilities and equipment used to transmit electricity to ultimate usage points such as homes and industries directly from nearby generators or from interchanges with higher voltage transmission networks which transport bulk power over longer distances. The voltage levels at which Distribution Systems operate differ among areas. Distribution Upgrades – The additions, modifications, and upgrades to the Transmission Provider's Distribution System at or beyond the Point of Interconnection to facilitate interconnection of the Small Generating Facility and render the transmission service necessary to effect the Interconnection Customer's wholesale sale of electricity in interstate commerce. Distribution Upgrades do not include Interconnection Facilities.

  • Curriculum Equivalencies The following suggested course sequence includes all course requirements for this articulation agreement following admission to the College of Allied Health Sciences BS Respiratory Therapy (Online) program. You should consult with an academic advisor each semester to ensure you maintain appropriate degree progress and are fulfilling all requirements for the agreement. Course sequencing below assumes a fall start date. If starting the program during any other term, please consult with your academic advisor. *NOTE: Required coursework for the associate degree and credentials required for admission to the BS Respiratory Therapy (Online) program are not outlined here. Please consult your academic advisor at your first institution for those details. For details beyond course planning, please consult with your academic advisor or the Transfer & Transition Advising Center. ALL ASSOCIATES COURSEWORK‌ Washington State Community College University of Cincinnati ASSOCIATE COURSEWORK up to 70 credits Advanced Standing 0000 BLOCK CREDIT Total transfer credits toward UC degree: Max 70 Total credits required for bachelor’s degree at UC: 120 Remaining Coursework at University of Cincinnati

  • CAISO Monthly Billed Fuel Cost [for Geysers Main only] The CAISO Monthly Billed Fuel Cost is given by Equation C2-1. CAISO Monthly Billed Fuel Cost Equation C2-1 = Billable MWh ◆ Steam Price ($/MWh) Where: • Steam Price is $16.34/MWh. • For purposes of Equation C2-1, Billable MWh is all Billable MWh Delivered after cumulative Hourly Metered Total Net Generation during the Contract Year from all Units exceeds the Minimum Annual Generation given by Equation C2-2. Equation C2-2 Minimum Annual Generation = (Annual Average Field Capacity ◆ 8760 hours ◆ 0.4) - (A+B+C) Where: • Annual Average Field Capacity is the arithmetic average of the two Field Capacities in MW for each Contract Year, determined as described below. Field Capacity shall be determined for each six-month period from July 1 through December 31 of the preceding calendar year and January 1 through June 30 of the Contract Year. Field Capacity shall be the average of the five highest amounts of net generation (in MWh) simultaneously achieved by all Units during eight-hour periods within the six-month period. The capacity simultaneously achieved by all Units during each eight-hour period shall be the sum of Hourly Metered Total Net Generation for all Units during such eight-hour period, divided by eight hours. Such eight-hour periods shall not overlap or be counted more than once but may be consecutive. Within 30 days after the end of each six-month period, Owner shall provide CAISO and the Responsible Utility with its determination of Field Capacity, including all information necessary to validate that determination. • A is the amount of Energy that cannot be produced (as defined below) due to the curtailment of a Unit during a test of the Facility, a Unit or the steam field agreed to by CAISO and Owner. • B is the amount of Energy that cannot be produced (as defined below) due to the retirement of a Unit or due to a Unit’s Availability remaining at zero after a period of ten Months during which the Unit’s Availability has been zero. • C is the amount of Energy that cannot be produced (as defined below) because a Force Majeure Event reduces a Unit’s Availability to zero for at least thirty (30) days or because a Force Majeure Event reduces a Unit’s Availability for at least one hundred eighty (180) days to a level below the Unit Availability Limit immediately prior to the Force Majeure Event. • The amount of Energy that cannot be produced is the sum, for each Settlement Period during which the condition applicable to A, B or C above exists, of the difference between the Unit Availability Limit immediately prior to the condition and the Unit Availability Limit during the condition.

  • Mileage Measurement Where required, the mileage measurement for LIS rate elements is determined in the same manner as the mileage measurement for V&H methodology as outlined in NECA Tariff No. 4.

  • Fixed Kilowatt-Hour Rate Product If Clearview Energy would like to propose a change to a fixed kilowatt-hour rate product, you will be notified by the process described in Change of Terms. Fixed price products may change due to new or modified federal, state or local laws; or regulatory actions that impose new or modified fees. 2b. Month-to-month Variable Kilowatt-Hour Rate Product – Month-to-month variable kilowatt-hour rate products are subject to change without notice at Clearview Energy’s discretion outside of any applicable promotion. If applicable, the Monthly Base Charge may also fluctuate outside of any applicable promotion. After the first month, the price may vary based on a number of factors, including market supply prices, energy capacity prices, settlement costs and other market- related factors, as determined at our discretion, plus estimated total state taxes, fees, charges or other assessments, along with our costs, expenses and profit margins. There is no limit on how much the price may change from one billing cycle to the next. The price can change each billing period. The Customer will not know the price until receiving the bill. A customer may obtain the previous 24 months’ average monthly billed price for the customer’s rate class and service territory at 1.800.746.4702 and xxx.xxxxxxxxxxxxxxx.xxx. Historical pricing is not indicative of present or future pricing. All pricing can be viewed at xxx.XxxxxxxxxXxxxxx.xxx.

Time is Money Join Law Insider Premium to draft better contracts faster.