Quality Requirements. Performance Indicator Heading Indicator (specific) Threshold Method of Measurement Frequency of monitoring Consequence of Breach QUALITY Patient Safety - Incidents I1 Number of incidents Adverse incidents include the following: clinical or non clinical adverse events that have potential to cause avoidable harm to a patient, including medical errors or adverse events related to medical devices or other equipment. Clinical or non- clinical accidents, accidental injuries to staff and members of the public, verbal, physical or psychological abuse or harassment, unusual or dangerous occurrences, damage to trust property, plant or equipment, fire or flood, security, theft or loss, near misses are identified as any event where under different circumstances significant injury or loss may have occurred Number of recorded incidents in the contract month Monthly Remedial Action Plan brought to Performance Meeting following breach; action under Module C Clause 32 if needed I2 Number of Sis Definition of SUI according to trust policy and national guidance Number of Serious Untoward Incidents reported in contract month Monthly Remedial Action Plan brought to Performance Meeting following breach; action under Module C Clause 32 if needed S1 Percentage of eligible staff received child safeguarding training at level 2 (as identified in LSCB training strategy) 95% Number received training/ Number of identified staff requiring training Monthly S2 Percentage of eligible staff received adult safeguarding awareness training at level 2 ( as identified in K&M Safeguarding Vulnerable Adults training strategy) 95% Number of staff trained/ Number of identified staff requiring training Monthly
Quality Requirements. Licensee agrees that all Relevant IANA Services offered under the Licensed Marks shall be of a consistent quality at least as high as the quality of comparable services offered by ICANN immediately prior to the Effective Date and shall comply with the service quality requirements contained in the Service Agreement. Licensor and Licensee agree that quality monitoring responsibilities hereunder shall be conducted by the Relevant Community, which shall report any failure of the Relevant IANA Services to comply with the relevant quality standards to Licensor.
Quality Requirements. Supplier shall comply with Tesla’s quality requirements set forth in Attachment 6 entitled “Tesla Motors Supplier Handbook”.
Quality Requirements. 5.5.1. Each assignment shall be carried out in full and as accurately as possible in accordance with the instructions given in the order form. The work delivered shall have been thoroughly revised and checked by the Contractor, so as to be usable, as it stands, without further revision by the Translation Centre. The Contractor shall pay particular attention to ensuring that all references to documents already published have been checked and cited correctly, that any documentation referred to in Article 5.9 has been consulted, and that the terminology used is consistent throughout the text. Where an assignment is returned incomplete, the Contractor shall be obliged, when asked, to make good any omissions.
Quality Requirements. The Contractor shall be required to demonstrate by means of a Quality Plan that this organisation is so structured that all the requirements of the specification will be properly monitored and controlled. The Quality Plan and Control procedures are to be carried out in accordance with the Quality Control document NWS 1841/C1 and the Matla Quality Manual for Contractor. The Quality Control document is to be submitted for approval to Matla Engineering within three (3) days after order placement by the Contractor. No work may commence unless the Quality Control document has been approved in writing and a copy submitted to the Employers Representative. The Contractor, in conjunction with Matla Engineering must sign off all Quality Control documents after completing all work on site. The Contractor to submit a copy of the final signed off document to the Employers Representative within 1 week after Completion of a Unit.
Quality Requirements. The Xxxxxx understands that the Milk supplied by the Xxxxxx to the Processor must comply with the following Quality Requirements under the Category labelled “Expectation”: MEASURE CATEGORY EXPECTATION (no further action necessary) - Premium Quality - IMPROVEMENT REQUIRED (in accordance with Item 4 of Schedule 2) - Grade B Quality - REVIEW & RETEST (in accordance with Item 4 of Schedule 2) - Grade C Quality - REJECTION (subject to Item 4 of Schedule 2) - Unsatisfactory Quality - ANTIBIOTICS Not to be detected If any are detected TOTAL BACTERIAL COUNT <80,000 ibc/ml >80,000 to <150,000 ibc/ml >150,000 to <200,000 ibc/ml >200,000 ibc/ml and sensory indicators are below standard SOMATIC CELL COUNT <200,000 cells/ml >200,000 to <300,000 cells/ml >300,000 to <400,000 cells/ml >400,000 cells/ml PSEUDOMONAS <100 cfu/ml >100 cfu/ml to <1,000 cfu/ml >1,000 cfu/ml to <10,000 cfu/ml >10,000 cfu/ml FAT >4.9/100ml >4.6g/100ml to <4.9g/100ml >4.4g/100ml to <4.6g/100ml <4.4g/100ml PROTEIN >3.8g/100ml >3.6g/100ml to <3.8g/100ml >3.4g/100ml to <3.6g/100ml <3.4g/100ml
Quality Requirements. Customer represents and warrants to Owner that all Biomass tendered by or for the account of Customer for Terminal Services will conform to the Specifications. Owner will not be obligated to load or unload Biomass that fails to meet the Specifications at the time tendered by Customer, but, to the extent that Owner loads or unloads Biomass that fails to meet the Specifications, in no event will Owner have any liability whatsoever for loading or unloading such Biomass. Owner may, upon prior written notice to Customer, impose other limitations on the Biomass delivered to the Terminal in order to (a) comply with applicable Laws, (b) protect health and safety, and (c) protect the premises, equipment or facilities at the Terminal.
Quality Requirements. The Supplier acknowledges and agrees that:
Quality Requirements a) MSL's target is [*] defect free production. MSL shall follow an established continuous improvement program directed toward zero defect production. MSL will report progress quarterly to IBM. MSL will provide quality reports monthly as defined in the Product Attachments.
Quality Requirements. 6.1. Products, goods and/or services shall be delivered and/or provided according to the legal provisions and standards as amended from time to time and as set forth in the purchase order itself or in its enclosures and shall expressly comply with the state of the art (see Sub-clause 12.1).
