Markings. 1.8.1. Every hose shall bear, at intervals of not greater than 0.5 m, the following clearly legible and indelible identification markings consisting of characters, figures or symbols.
Markings. If permitted by applicable Law, on or reasonably promptly after the Closing Date, Owner will cause to be affixed to, and maintained in, the cockpit of the Airframe and on each Engine, in each case, in a clearly visible location, a placard of a reasonable size and shape bearing the legend: “Subject to a security interest in favor of Wilmington Trust, National Association, not in its individual capacity but solely as Mortgagee.” Such placards may be removed temporarily, if necessary, in the course of maintenance of the Airframe or Engines. If any such placard is damaged or becomes illegible, Owner shall promptly replace it with a placard complying with the requirements of this Section.
Markings. 4.1. The samples of devices for indirect vision submitted for approval shall bear the trade name or xxxx of the manufacturer; this marking shall be clearly legible and be indelible.
Markings. 7.1. Types of mechanical coupling devices and components submitted for approval shall bear the trade name or xxxx of the manufacturer, supplier or applicant.
Markings. 6.1. The sample of specific component or multifunctional components submitted for approval shall bear the trade name or xxxx of the manufacturer and the type, including one concerning designation on operating temperatures ("M" or "C" for moderate or cold temperatures "L" for LNG as appropriate); and for flexible hoses also the manufacturing month and year; this marking shall be clearly legible and indelible.
Markings. If permitted by applicable Law, on or reasonably promptly after the Delivery Date, Lessee will cause to be affixed to, and maintained in, the cockpit of the Airframe and on each Engine, in each case, in a clearly visible location (it being understood that the location of such placards, as identified to the Owner Participant prior to the Delivery Date, shall be deemed to be in compliance with this requirement), a placard of a reasonable size and shape bearing the legend, in English, set forth in Schedule 6. Such placards may be removed temporarily, if necessary, in the course of maintenance of the Airframe or Engines. If any such placard is damaged or becomes illegible, Lessee shall promptly replace it with a placard complying with the requirements of this Section 7.1.3.
Markings. 4.1. All tyres constituting the type of tyre shall be marked as prescribed by either Regulation No. 30 or 54, as applicable.
Markings. The samples of a belt type or type of restraint system submitted for approval in conformity with the provisions of paragraphs 3.2.2.2., 3.2.2.3. and 3.2.2.4. above shall be clearly and indelibly marked with the manufacturer's name, initials or trade name or xxxx.
Markings. 4.1. The components of the AVAS shall bear:
Markings. 4.1. The components of the sound reduction system, excluding fixing hardware and piping, shall bear:
