Acceptance Testing. At the time of installation of a LIS trunk group, and at no additional charge, acceptance tests will be performed to ensure that the service is operational and meets the applicable technical parameters.
Acceptance Testing. The MCP shall have the capability to report all elements in the Minimum Data Set as set forth in the ODM Encounter Data Specifications and shall submit a test file in the ODM-specified medium in the required formats prior to contracting or prior to an information systems replacement or update. Acceptance testing of encounter data is required as specified in this appendix.
Acceptance Testing. Purchasing Entity may establish a process, in keeping with industry standards, to ascertaining whether the Product meets the standard of performance or specifications prior to Acceptance by the Purchasing Entity.
Acceptance Testing. Except as otherwise specified in the Scope of Work, all Deliverables shall be subject to the Agency’s Acceptance Testing and Acceptance, unless otherwise specified in the Statement of Work. Upon completion of all work to be performed by Contractor with respect to any Deliverable, Contractor shall deliver a written notice to the Agency certifying that the Deliverable meets and conforms to applicable Specifications and is ready for the Agency to conduct Acceptance Tests; provided, however, that Contractor shall pretest the Deliverable to determine that it meets and operates in accordance with applicable Specifications prior to delivering such notice to the Agency. At the Agency’s request, Contractor shall assist the Agency in performing Acceptance Tests at no additional cost to the Agency. Within a reasonable period of time after the Agency has completed its Acceptance Testing, the Agency shall provide Contractor with written notice of Acceptance or Non-acceptance with respect to each Deliverable that was evaluated during such Acceptance Testing. If the Agency determines that a Deliverable satisfies its Acceptance Tests, the Agency shall provide Contractor with notice of Acceptance with respect to such Deliverable. If the Agency determines that a Deliverable fails to satisfy its Acceptance Tests, the Agency shall provide Contractor with notice of Non-acceptance with respect to such Deliverable. In the event the Agency provides notice of Non-acceptance to Contractor with respect to any Deliverable, Contractor shall correct and repair such Deliverable and submit it to the Agency within ten (10) days of Contractor’s receipt of notice of Non- acceptance so that the Agency may re-conduct its Acceptance Tests with respect to such Deliverable. In the event the Agency determines, after re-conducting its Acceptance Tests with respect to any Deliverable that Contractor has attempted to correct or repair pursuant to this section, that such Deliverable fails to satisfy its Acceptance Tests, then the Agency shall have the continuing right, at its sole option, to: (i) require Contractor to correct and repair such Deliverable within such period of time as the Agency may specify in a written notice to Contractor; (ii) refuse to accept such Deliverable without penalty and without any obligation to pay any fees or other amounts associated with such Deliverable (or receive a refund of any fees or amounts already paid with respect to such Deliverable); (iii) accept such Deliver...
Acceptance Testing. At the time of installation of a WIS trunk group, and at no additional charge, acceptance tests will be performed to ensure that the service is operational and meets the applicable technical parameters.
Acceptance Testing. (a) Following delivery to District of a System Deliverable and the installation or other implementation thereof, the System Deliverable shall be subject to acceptance testing by District. If District notifies Contractor that a System Deliverable does not satisfy or conform to the Final Criteria within the time period prescribed in the applicable Work Order (the “Initial Acceptance Period”), Contractor shall, at no cost to District, take whatever action is necessary to correct any deficiencies within thirty (30) calendar days after District’s notification to Contractor.
Acceptance Testing. On delivery of the Equipment and/or Software to Saint Luke’s (as applicable), and with Company’s assistance if requested by Saint Luke’s, Saint Luke’s shall, within sixty (60) calendar days after receipt of such Software, conduct acceptance testing, which shall include full-stress testing to determine whether, in Saint Luke’s sole judgment: (i) the Software meets the Documentation and provided specifications, provides the functionality and performance characteristics described in the Documentation, and otherwise performs in accordance with the Documentation or as stated elsewhere in this Agreement; (ii) the Software is capable of running at full load, on a repetitive basis, using a variety of Saint Luke’s actual data, without failure; and (iii) the Documentation for the Software meets the requirements in any proposal, response to request for information, or as stated elsewhere in this Agreement (“Acceptance Tests”). If the Software successfully completes the Acceptance Tests, Saint Luke’s shall so notify Company in writing within five (5) business days and the Software shall be deemed to be accepted (“Acceptance”). In such case, the acceptance date shall be the date that the Software satisfactorily completed all of the tests specified above (“Acceptance Date”). Notwithstanding any other provision contained herein, no warranty period for the Software or hardware which is provided as part of the Software shall begin until the Acceptance Date. If the Software fails to meet any or all of the specified Acceptance Tests, Saint Luke’s shall notify Company of such failure in writing and Company shall have fifteen (15) business days in which to correct, modify, or improve the Software or provide a new version of the Software, to cause it to meet each Acceptance Test. Thereafter, Saint Luke’s shall have fifteen (15) additional business days in which to repeat all of the Acceptance Tests specified above. This process shall be repeated as may be necessary until the Software meets the Acceptance Tests; provided, however, that if the Software does not achieve Acceptance hereunder within ninety (90) calendar days after Company’s initial written certification to Saint Luke’s that the Software is ready for Acceptance Testing, then Saint Luke’s shall have the right and option to: (i) cancel the PA (or the applicable Purchase Order for the Equipment) and request the removal of the Software failing to meet the acceptance criteria; (ii) receive a full reimbursement from Compan...
Acceptance Testing. At the time of installation of an LIS trunk group, and at no additional charge, the Parties will cooperatively test the same parameters tested for terminating Feature Group D Switched Access Service. See USWC's applicable Switched Access Tariff for the specifications.
Acceptance Testing. After Contractor has installed the Licensed Software, the City shall have a period of [insert number] days (“Acceptance Testing Period”) from the date of installation to verify that the Licensed software substantially performs to the specifications contained in the Documentation. In the event that the City determines that the Licensed Software does not meet such specifications, the City shall notify the Contractor in writing, and Contractor shall modify or correct the Licensed Software so that it satisfies the Acceptance criteria. The date of Acceptance will be that date upon which City provides Contractor with written notice of satisfactory completion of Acceptance testing. If City notifies Contractor after the Acceptance Testing Period that the Licensed Software does not meet the Acceptance criteria of this section, then City shall be entitled to terminate this License in accordance with the procedures specified in Section 30(b) herein, and shall be entitled to a full refund of the license fee.
Acceptance Testing. Testing by Consultant Before delivery to MLA of any Deliverable, the Consultant must test the Deliverable to ensure that it meets the applicable Specifications.
