Workover Drilling definition

Workover Drilling means operations on a producing or non-producing well related to the operation that results in the deepening (vertically or horizontally) of a well or plugging back to a shallower horizon for the purpose of accessing PDNP and/or PUD or increasing the PDP component of Proved Reserves and shall include the intended initiation, restoration or increase of Production and an intended increase in the PDP component of Proved Reserves; provided that it shall not include any Workover Operations.
Workover Drilling means operations on a producing or non-producing well related to the operation that results in the deepening (vertically or horizontally) of a well or plugging back to a shallower horizon for the purpose of accessing proved undeveloped reserves or increasing the proved developed producing component of Proved and Probable Reserves and shall include the intended initiation, restoration or increase of Production and an intended increase in the proved developed producing component of Proved and Probable Reserves; provided that it shall not include any Workover Operations; “Drilling” means the search for Oil and Gas in their natural states and original locations that may include, but not be limited to, drilling, completion, re­entry, sidetracking, horizontal laterals, recompletions, fracing, Workover Drilling, secondary recovery, tertiary recovery and any other method; “Plugging and Abandonment Expenses” means the expense and capitalized cost to plug and abandon a well as required by the appropriate regulatory authorities as a result of the well being (i) completed as a nonproductive well; (ii) ceasing to produce oil or gas; (iii) operated for the purpose for which the well is no longer permitted; or (iv) in violation of an environmental law, rule or regulation.

Examples of Workover Drilling in a sentence

  • Data used in the CHARM assessment include toxicity, biodegradation and bioaccumulation, and the model is divided into 4 main algorithms: Production, Completion / Workover, Drilling and Cementing.

  • What is the amount the Insured expects to spend as operator on independent contractors for: Lease work: Work-over: Drilling: g.

  • This included the costs for acquiring 962-line km of 2D and 210 km2 of 3D seismic data (Table 1), exploration and development drilling as well as workover operations in both onshore and offshore.Exploration, Development and Workover Drilling OperationsDuring the 2003/04 fiscal year, a total of six exploration/appraisal wells, 13 development wells (including one well in Tasmanian waters, Yolla-4) and one shallow stratigraphic well were drilled.

Related to Workover Drilling

  • drilling means the act of boring a hole to reach a proposed bottom hole location through which oil or gas may be produced if encountered in paying quantities, and includes redrilling, sidetracking, deepening, or other means necessary to reach the proposed bottom hole location, testing, logging, plugging, and other operations necessary and incidental to the actual boring of the hole;

  • Workover means operations on a producing well to restore or increase production.

  • Exploration Well means a well that is not a development well, a service well or a stratigraphic test well.

  • Pilot project means an innovative environmental project that covers one or more designated facilities, designed and implemented in the form of an EMSA. (See Section 52.3 of the Act.)

  • Drilling operations means the drilling of an oil and gas well and the production and completion operations ensuing from the drilling which require entry upon the surface estate and which were commenced after June 30, 1979, and oil and gas geophysical and seismograph exploration activities commenced after June 30, 1983.

  • Drill means a response to a planned, simulated event.

  • Dry well means a type of infiltration practice that allows storm water run-off to flow directly into the ground via a bored or otherwise excavated opening in the ground surface.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • Horizontal well means a well bore drilled laterally at an angle of at least eighty (80) degrees to the vertical or with a horizontal projection exceeding one hundred (100) feet measured from the initial point of penetration into the productive formation through the terminus of the lateral in the same common source of supply.

  • Water well means an excavation that is drilled, cored, bored, augered, washed, driven, dug, jetted, or otherwise constructed for the purpose of exploring for groundwater, monitoring groundwater, utilizing the geothermal properties of the ground, or extracting water from or injecting water into the aquifer. “Water well” does not include an open ditch or drain tiles or an excavation made for obtaining or prospecting for oil, natural gas, minerals, or products mined or quarried.

  • Oil well means any well capable of producing oil or oil and casinghead gas from a common source of supply as determined by the commission.

  • Deep well means a well located and constructed in such a manner that there is a continuous layer of low permeability soil or rock at least 5 feet thick located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Shallow well means a well located and constructed in such a manner that there is not a continuous layer of low permeability soil or rock (or equivalent retarding mechanism acceptable to the department) at least 5 feet thick, the top of which is located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Temporary clean coal technology demonstration project means a clean coal technology demonstration project that is operated for a period of five years or less and that complies with the SIP and other requirements necessary to attain and maintain the national ambient air quality standards during the project and after the project is terminated.

  • Exploratory Well means a well that is not a development well, a service well or a stratigraphic test well.

  • Gas well means a well producing gas or natural gas from a common source of gas supply as determined by the commission.

  • Area C means areas of the West Bank outside Areas A and B, which, except for the issues that will be negotiated in the permanent status negotiations, will be gradually transferred to Palestinian jurisdiction in accordance with this Agreement.

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • Monitoring well means a water well intended for the purpose of determining groundwater quality or quantity.

  • Project area plan means a written plan that, after the plan's effective date, guides and controls the development within a project area.

  • Test Well means a well constructed for the purpose of obtaining information needed to design a well prior to its construction. Test wells are cased and can be converted to observation or monitoring wells and under certain circumstances to production wells

  • Intake means “Sanctioned Intake”.

  • exploration area means that part of the Area allocated to the Contractor for exploration, described in schedule 1 hereto, as the same may be reduced from time to time in accordance with this contract and the Regulations;

  • associated facilities means all associated track structures, over and under track structures, supports (including supports for equipment or items associated with the use of the Network), tunnels, bridges, train control systems, signalling systems, communication systems and associated plant, machinery and equipment from time to time but only to the extent that such assets are related to or connected with the Network but does not include any sidings or yards;

  • Project Land means any parcel or parcels of land on which the project is developed and constructed by a promoter;

  • Excavation work means the making of any man-made cavity, trench, pit or depression formed by cutting, digging or scooping;