Waterproofing concrete/masonry sealer definition

Waterproofing concrete/masonry sealer means a clear or pigmented film-forming coating that is labeled and formulated for sealing concrete and masonry to provide resistance against water, alkalis, acids, ultraviolet light, and staining.
Waterproofing concrete/masonry sealer means a clear or pigmented sealer that is labeled and formulated for sealing concrete and masonry to
Waterproofing concrete/masonry sealer means a clear or pigmented film-forming coating that is labeled and formulated for sealing concrete and masonry to provide

More Definitions of Waterproofing concrete/masonry sealer

Waterproofing concrete/masonry sealer means, for products manufactured before March 1, 2017, a clear or pigmented film-forming coating that is labeled and formulated for sealing concrete and masonry to provide resistance against water, alkalis, acids, ultraviolet light and staining. For products manufactured on or after March 1, 2017, the waterproofing concrete/masonry sealer coating category is eliminated and coatings meeting this definition are subject to the VOC limit of the applicable coating category in Table 1-1 of this regulation.

Related to Waterproofing concrete/masonry sealer

  • Drywell means an unlined or partially lined underground pit (regardless of geometry) into which drainage from roofs, basement floors, water softeners or other non-wastewater sources is discharged and from which the liquid seeps into the surrounding soil.

  • Beam scattering foil means a thin piece of material (usually metallic) placed in the beam to scatter a beam of electrons in order to provide a more uniform electron distribution in the useful beam.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Carpet and upholstery cleaner means a cleaning product designed for the purpose of eliminating dirt and stains on rugs, carpeting, and the interior of motor vehicles and/or on household furniture or objects upholstered or covered with fabrics such as wool, cotton, nylon or other synthetic fabrics. “Carpet and Upholstery Cleaner” includes, but is not limited to, products that make fabric protectant claims. “Carpet and Upholstery Cleaner” does not include “General Purpose Cleaners”, “Spot Removers”, vinyl or leather cleaners, dry cleaning fluids, or products designed exclusively for use at industrial facilities engaged in furniture or carpet manufacturing.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Glass cleaner means a cleaning product designed primarily for cleaning surfaces made of glass. Glass cleaner does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.

  • HDPE means high density polyethylene;

  • Freeboard means a factor of safety usually expressed in feet above a flood level for purposes of floodplain management. "Freeboard" tends to compensate for the many unknown factors that could contribute to flood heights greater than the height calculated for a selected size flood and floodway conditions, such as wave action, blockage of bridge or culvert openings, and the hydrological effect of urbanization of the watershed.

  • Automotive Wax, Polish, Sealant or Glaze means a product designed to seal out moisture, increase gloss, or otherwise enhance a motor vehicle’s painted surfaces. “Automotive Wax, Polish, Sealant or Glaze” includes, but is not limited to, products designed for use in autobody repair shops and “drive-through” car washes, as well as products designed for the general public. “Automotive Wax, Polish, Sealant or Glaze” does not include “Automotive Rubbing or Polishing Compounds”, automotive wash and wax products, surfactant-containing car wash products, and products designed for use on unpainted surfaces such as bare metal, chrome, glass, or plastic.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.

  • Skateboard means a board with small wheels that is usually ridden by a person. For purposes of these rules, a nonmotorized scooter (a board with a handle) is considered a skateboard.

  • Deck means a walkway immediately adjacent to a swimming pool.

  • Ozone season means the period of time beginning May 1 of a year and ending on September 30 of the same year, inclusive.

  • Bathroom and tile cleaner means a product designed or labeled to clean tile or surfaces in bathrooms. “Bathroom and Tile Cleaner” does not include “Toilet/Urinal Care Product.”

  • Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;

  • Waterproofer means a product designed and labeled exclusively to repel water from fabric or leather substrates. Waterproofer does not include fabric protectants.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Weathertight means that in any sea conditions water will not penetrate into the ship.

  • Floor seam sealer means any product designed and labeled exclusively for bonding, fusing, or sealing (coating) seams between adjoining rolls of installed flexible sheet flooring.

  • Flashing light means a light flashing at regular intervals at a frequency of 120 flashes or more per minute.

  • Design torso angle means the angle measures between a vertical line through the "R" point and the torso line in a position which corresponds to the design position of the seat-back established by the vehicle manufacturer;