Water main pipe definition

Water main pipe means a main line to the water distribution system with feeder lines or service lines connected to it and which typically is 6 inches or greater in diameter, and includes its gaskets and other appurtenances.
Water main pipe means a water main complying with the department’s standards for water main construction.
Water main pipe means a main line to the water distribution system with feeder lines or service lines connected to it and which typically is 6 inches or greater in diameter, and includes its gaskets and other appurtenances.[ARC 7621B, IAB 3/11/09, effective 4/15/09; ARC 8124B, IAB 9/9/09, effective 10/14/09; ARC 9011B, IAB 8/25/10, effective 9/29/10]567—135.3(455B) UST systems—design, construction, installation and notification.135.3(1) Performance standards for new UST systems. In order to prevent releases due to structural failure, corrosion, or spills and overfills for as long as the UST system is used to store regulated substances, all owners and operators of new UST systems must meet the following requirements.

Examples of Water main pipe in a sentence

  • Water main pipe and fittings that have been laid out further in advance of the installation operation must remain covered.

  • Water main pipe and fittings that have been placed shall remain covered on the advancing end until the next segment of pipe is connected.

  • Water main pipe shall not be installed in frozen ground or in water, and no water shall be allowed to run into or through the pipe.

  • Water main pipe assembly shall be push-on joint unless indicated otherwise.

  • Installation of water mains and appurtenances shall conform to the latest edition of AWWA Standard C600 for D.I.P. Water main pipe and fittings shall be laid on a good level foundation with no gaps or humps under the pipe or fittings.

  • Water main pipe assembly in a bore casing shall be restrained joint unless indicated otherwise.

  • Water main pipe material usage varies significantly over geographic regions (see Figure 11).

  • Water main pipe, pressure tested in place to 150 psi without excessive leakage, is used for pressure sewers and force mains at distances greater than 20 feet from water wells.

  • Water main pipe and service connections shall be a minimum of 10 feet away from building foundations and/or roof lines.

  • Water main pipe used in the City of San Angelo water distribution system shall be Cement-lined Ductile Iron, C900 PVC, C905 PVC, C301 Prestressed-Concrete Steel Cylinder Pressure or C303 Concrete Bar-wrapped Steel Cylinder Pressure pipe.


More Definitions of Water main pipe

Water main pipe means a water supply pipe provided for public or community use.
Water main pipe means a main line to the water distribution system with feeder lines or service lines connected to it and which typically is of 6 inches or greater in diameter, and including its gaskets and other appurtenances. ITEM 2. Amend 567—135.2(455B) by revising the following definitions as follows:
Water main pipe means a water main complying with the Department of Natural Resources standards for water main construction.

Related to Water main pipe

  • Water Main means (subject to Section 219(2) of the 1991 Act) any pipe, not being a pipe for the time being vested in a person other than the water undertaker, which is used or to be used by a water undertaker or licensed water supplier for the purpose of making a general supply of water available to customers or potential customers of the undertaker or supplier, as distinct from for the purpose of providing a supply to particular customers;

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • Stormwater management measure means any practice, technology, process, program, or other method intended to control or reduce stormwater runoff and associated pollutants, or to induce or control the infiltration or groundwater recharge of stormwater or to eliminate illicit or illegal non-stormwater discharges into stormwater conveyances.

  • Pipeline means any pipe, pipes, or pipelines used for the intrastate transportation or transmission of any solid, liquid, or gaseous substance, except water.

  • Stormwater management BMP means an excavation or embankment and related areas designed to retain stormwater runoff. A stormwater management BMP may either be normally dry (that is, a detention basin or infiltration system), retain water in a permanent pool (a retention basin), or be planted mainly with wetland vegetation (most constructed stormwater wetlands).

  • Stormwater management planning area means the geographic area for which a stormwater management planning agency is authorized to prepare stormwater management plans, or a specific portion of that area identified in a stormwater management plan prepared by that agency.

  • Transportation Company means any organization which provides its own or its leased vehicles for transportation or which provides freight forwarding or air express services.

  • connection pipe means a pipe, the ownership of which is vested in the municipality and installed by it for the purpose of conveying water from a main to a water installation, and includes a “communication pipe” referred to in SANS 0252 Part I;

  • Bedrock means continuous rock that underlies the soil or is exposed at the surface. Bedrock is generally considered impervious, but if fractured or deteriorated, it may allow effluent to pass through without adequate treatment.