vinyl chloride definition

vinyl chloride means vinyl chloride monomer in the liquid or vapour
Sample 1
vinyl chloride means vinyl chlo- ride monomer.(c) Permissible exposure limit. (1) No employee may be exposed to vinyl chloride at concentrations greater than 1 ppm averaged over any 8-hour period, and(2) No employee may be exposed to vinyl chloride at concentrations great- er than 5 ppm averaged over any period not exceeding 15 minutes.(3) No employee may be exposed to vinyl chloride by direct contact with liquid vinyl chloride.(d) Monitoring. (1) A program of ini- tial monitoring and measurement shall be undertaken in each establishment to Occupational Safety and Health Admin., Labor § 1910.1017 determine if there is any employee ex- posed, without regard to the use of res- pirators, in excess of the action level.(2) Where a determination conducted under paragraph (d)(1) of this section shows any employee exposures, with- out regard to the use of respirators, in excess of the action level, a program for determining exposures for each such employee shall be established. Such a program:
Sample 1

Related to vinyl chloride

  • Polystyrene foam means blown polystyrene and expanded and

  • HDPE means high density polyethylene;

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Chemicals means substances applied to forest lands or timber including pesticides, fertilizers, and other forest chemicals.

  • Isomer means all enantiomers and diastereomers.

  • Kerosene means all grades of kerosene, including, but not limited to, the 2 grades of kerosene, No. 1-K and No. 2-K, commonly known as K-1 kerosene and K-2 kerosene respectively, described in American society for testing and materials specifications D-3699, in effect on January 1, 1999, and kerosene-type jet fuel described in American society for testing and materials specification D-1655 and military specifications MIL-T-5624r and MIL-T-83133d (grades jp-5 and jp-8), and any successor internal revenue service rules or regulations, as the specification for kerosene and kerosene-type jet fuel. Kerosene does not include an excluded liquid.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Cannabinoid extract means a substance obtained by separating cannabinoids from marijuana by:

  • Bottle means any vessel intended to contain liquids and having a capacity of not more than 43

  • Expanded polystyrene means blown polystyrene and expanded

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Diesel means a distillate oil which can be used as fuel for the operation of a compression ignition engine and which has an approximate boiling temperature of between 150 °C to 400 °C;

  • combustible waste means non-biodegradable, non- recyclable, non-reusable, non-hazardous solid waste having minimum calorific value exceeding 1500 kcal/kg and excluding chlorinated materials like plastic, wood pulp, etc.;

  • Pesticides means chemicals in either of the following subcategories:

  • Crawling bug insecticide means any insecticide product that is designed for use against ants, cockroaches, or other household crawling arthropods, including, but not limited to, mites, silverfish or spiders. “Crawling Bug Insecticide” does not include products designed to be used exclusively on humans or animals, or any house dust mite product. For the purposes of this definition only:

  • Defoliant means any substance or mixture of substances intended for causing the leaves or foliage to drop from a plant, with or without causing abscission.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Polyolefin adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • Chemical agent shall mean any compound which, when suitably disseminated, produces incapacitating, damaging or lethal effects on people, animals, plants or material property.

  • Semisolid means a product that, at room temperature, will not pour, but will spread or deform easily, including but not limited to gels, pastes, and greases.

  • Putrescible waste means a solid waste that contains organic matter capable of being decomposed by microorganisms so as to cause a malodor, gases, or other offensive conditions, or which is capable of providing food for birds and other vectors. Putrescible wastes may form a contaminated leachate from microbiological degradation, chemical processes, and physical processes. Putrescible waste includes, but is not limited to, garbage, offal, dead animals, general household waste, and commercial waste. All solid wastes which do not meet the definitions of inert or chemical wastes shall be considered putrescible wastes.