Examples of Verification Method in a sentence
Verification method: R - review Before completion of the Qualification Design phase the Supplier and the CA shall agree on: • final manufacturing drawings (see REQ-034950/A); • detailed procedures related to the testing during Manufacturing phase (see Chapter 7.3.2 Manufacturing); • common nonconformity control system (see REQ-034954/A).
Verification method: R – review, T – test (Interferometric report) The scratch/dig (S/D) of the reflective surface of the OAP mirrors shall be ≤ 60/40 with a best effort to achieve ≤ 40/20 S/D for full CAP according to the MIL-PRF-13830B standard after coating.
Verification method: R - review, T - test (Dimensional report) OAP surface and coating REQ-034930/A REQ-034931/A The RMS RWE of the OAP shall be lower than λ/20 (< 40 nm) for spatial scale lengths > 1 mm over the CAP.
NOTE: RGA tests can be agreed with CA to be done on its premises Verification method: T – test REQ-034937/A The side face of the OAP closest to the Parent axis shall have a mark indicating the plane with the optical axis and the focal point.
Verification method: R - review, T – test (Interferometric report) The RMS surface slope error of the OAP mirrors shall not exceed 10 µrad (best effort ≤ 20 nm / 1 cm, ≤2 µrad) for spatial periods from 1 to 10 mm for 95 % of the CAP.
Verification method: R - review, T - test (Surfaces quality report) Other requirements for the OAP REQ-034935/A REQ-034936/A The OAP shall be vacuum compatible.
Verification method: R - review, T - test (Surfaces quality report) The OAP shall be coated with a Protected Gold coating to ensure long term stability and a LIDT > 200 mJ/cm2, when reflecting the L3 laser at central wavelength 810 nm, 30 J, 30 fs, 10 Hz repetition rate.
Verification method: I – inspection (including photo documentation) REQ-034938/A REQ-034939/A REQ-034940/A REQ-034941/A REQ-034942/A The chamfers of the OAP substrates shall be consulted with and approved by the CA.
All specifications of this RSD document shall be met when the OAP is exposed to a vacuum of 1x10- Verification method: R – review, A – analysis Outgassing of the HF shall be checked through RGA test by the Supplier.
Verification method: R – review, T – test (Interferometric report) REQ-034932/A REQ-034933/A REQ-034934/A The Mid-Spatial Frequency performance shall assure a Focus Spot size < 1.5x the given theoretical diffraction limit.