Validation inspection definition

Validation inspection means an inspection of the premises of a licensed facility by the agency to assess whether a review by an accrediting organization has adequately evaluated the licensed facility according to minimum state standards.
Sample 1Sample 2
Validation inspection means an on-site inspection by the department of an accredited medical test site to determine that the accreditation organization's regulations are equivalent to this chapter and are enforced.
Sample 1Sample 2
Validation inspection means an inspection
Sample 1

Examples of Validation inspection in a sentence

  • The works undertaken in Area 1 and 2 at the time of reporting have included:  Removal of asbestos products, fly tipped waste and any other potentially contaminative or otherwise deleterious materials from across the site; Removal above ground structures, slabs and underground structures; Removal of the potentially contaminated made ground; Backfilling of all voids with site won natural clay; Validation inspection and sampling of the remaining soils.

  • This was the only means available to the Board to correct the error.

  • Validation inspection and testing will be undertaken at this time.

  • The waste consignment notes are included in Appendix 6.2. Validation inspection and sampling was undertaken at the end of the clearance works by the GEMCO site manager / asbestos surveyor (See Section 4).

  • No additional changes were made to the plant air system that would affect the conclusion of the CAL Validation inspection.

  • Observations and Findings CAL Item No. 5 – Compressed Air Overpressure, “Overpressure protection will be provided downstream of the 20 pounds per square inch gauge (psig), 50 psig and 85 psig control air regulators to mitigate the effects of a postulated failed regulator.” The licensee installed relief valves on air headers inside the containment under DCP No. 12-DCP-584 which was reviewed during the CAL Validation inspection.


More Definitions of Validation inspection

Validation inspection means an inspection of the premises of a licensed facility by the agency to assess whether a review by an accrediting organization
Sample 1

Related to Validation inspection

  • Installation inspector means a person who, by reason of his knowledge of the physical sciences and the principles of engineering, acquired by a professional education and related practical experience, is qualified to supervise the installation of tank systems.

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Lead inspection means a surface-by-surface investigation to determine the presence of lead- based paint and the provisions of a report explaining the results of the investigation.

  • Validation as used in WAC 222-20-016, means the department's agreement that a small forest landowner has correctly identified and classified resources, and satisfactorily completed a roads assessment for the geographic area described in Step 1 of a long-term application.

  • Certificate of inspection means an unsworn statement,

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • Final Inspection means the process and procedure described in UGC Section 12.1.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • Tests means and include such test or tests to be carried out on the part of the contractor as are prescribed in the contract or considered necessary by BHEL, in order to ascertain the quality, workmanship, performance and efficiency of the contractor or part thereof.

  • Home inspection report means a written report that is

  • Inspections has the meaning set forth in Section 4.1.2.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Calibration means the determination of (1) the response or reading of an instrument relative to a series of known radiation values over the range of the instrument, or (2) the strength of a source of radiation relative to a standard.

  • Onsite means within the Prescribed Premises boundary.

  • Inspection means activities such as measuring, examining, testing, gauging one or more characteristics of the product or service and comparing the same with the specified requirement to determine conformity.

  • Study Site means the location(s) under the control of the Institution where the Study is actually conducted as set out in Schedule 1.

  • Laboratory or “LANL” means the geographical location of Los Alamos National Laboratory, a federally funded research and development center owned by the DOE / NNSA.

  • Due Diligence Examination shall have the meaning set forth in Section 3.2.

  • Geotechnical engineer means a professional engineer registered with the Association of Professional Engineers, Geologists, and Geophysicists of the Northwest Territories and whose principal field of specialization is the design and construction of earthworks in a permafrost environment;

  • Quality Surveillance Engineer / Inspector means any person appointed by or on behalf of the Purchaser to inspect or carry out quality surveillance on supplies, stores or work under the Contract or any person deputed by the Quality Surveillance Engineer for the said purpose.

  • Study Completion means the database for the Study has been locked and all Essential Documents have been provided to the Sponsor, including a copy of the letter from the Reviewing HREC acknowledging receipt of the final report and/or closure letter from the Principal Investigator.

  • Site Visit means a visit to the Site; and

  • Sampling means the distribution of samples to members of the general public in a public place.

  • Structural Engineer means the Engineer appointed or to be appointed from time to time by Promoter for the preparation of the structural design and drawings of the buildings .

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Screening means the evaluation process used to identify an individual's ability to perform activities of daily living and address health and safety concerns.