Unit package definition

Unit package means a standard commercial package of bottled water, which may consist of one or more containers.
Unit package means the first tie, wrap, or container applied to a single item, a quantity of the same item, a set, or an item with all its component parts, which constitutes a complete and identifiable package containing the unit of issue of a product for ultimate use.
Unit package means the first tie, wrap, or container applied to a

Examples of Unit package in a sentence

  • Unit package closure shall prevent accidental opening during shipment and storage.

  • Unit package and identify as a complete unit all kits, assemblies, and all article consisting of multiple items (e.g., hardware, pins, gaskets, etc.).

  • Unit package markings shall include part number per contracting document, supplier identity (name may be abbreviated), and quantity and unit (e.g., 1 each, 2 sets, 3 lbs., etc.).

  • A ‘basic administrative unit’ may be a ‘party’ because it may hold a right of easement over another spatial unit, see Figure 1.The Spatial Unit package concerns the classes LA_SpatialUnit, LA_SpatialUnitGroup, LA_Level, LA_LegalSpaceNetwork, LA_LegalSpaceBuildingUnit, LA_Required- RelationshipSpatialUnit (Figure 3) and the classes in the Surveying and Representation Subpackage.

  • The Surveying and Spatial Representation Subpackage is a subpackage of the Spatial Unit package (ISO/DIS 19152, 2010).

  • LADM also includes references to the standard, ISO 19156, Geographic information – Observations and Measurements, which is under development within ISO/TC 211.The three main packages of the LADM, the Party package, the Administrative package, and the Spatial Unit package are as follows.

  • P.D.Ouspensky‘s account In Search of the Miraculous (subtitled: Fragments of an Unknown Teaching) should be – and is generally – seen as having an important place in the Gurdjieff corpus because its authenticity as a record of Gurdjieff‘s teachings was endorsed by Gurdjieff himself (see page 178).

  • LA_SpatialUnit has been mapped at the level of IfcProject as it is also the class from which all other classes in the LADM Spatial Unit package stem.

  • Unit package 2.1 Unit Package - A unit package shall be so designed and constructed that it will contain the contents with no damage to the item(s), and with minimal damage to the unit pack during shipment and storage in the shipping container, and will allow subsequent handling.

  • The four subclasses of LA_SpatialUnit in the Spatial Unit package in Part 2, Land RegistrationThe LA_SpatialSource class as defined in LADM Edition I, is proposed to be further developed, see Figure 11.


More Definitions of Unit package

Unit package means a standard commercial package of a beverage or bottled drinking water. (age) “Vended water” means water that is dispensed by a water vending machine that is not placed by

Related to Unit package

  • Limited Resource Price Decrement means, for the 2017/2018 Delivery Year, a difference between the clearing price for Limited Demand Resources and the clearing price for Extended Summer Demand Resources and Annual Resources, representing the cost to procure additional Extended Summer Demand Resources or Annual Resources out of merit order when the Limited Resource Constraint is binding.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Palletized unit load means a MIL-STD-129 defined quantity of items, packed or unpacked, arranged on a pallet in a specified manner and secured, strapped, or fastened on the pallet so that the whole palletized load is handled as a single unit. A palletized or skidded load is not considered to be a shipping container. A loaded 463L System pallet is not considered to be a palletized unit load. Refer to the Defense Transportation Regulation, DoD 4500.9-R, Part II, Chapter 203, for marking of 463L System pallets.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Image intensifier means a device, installed in its housing, which instantaneously converts an x-ray pattern into a corresponding light image of higher intensity.

  • Operating parameter value means a minimum or maximum value established for a control device or process parameter that, if achieved by itself or in combination with one (1) or more other operating parameter values, determines that an owner or operator has complied with an applicable emission limit.

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.

  • Synchronous Optical Network (SONET) is an optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC-1/STS-1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • Generating Unit means one or more generating equipment combinations typically consisting of prime mover(s), electric generator(s), electric transformer(s), steam generator(s) and air emission control devices.

  • Planned unit development means a subdivision characterized by a unified site design, clustered residential units and/or commercial units, and areas of common open space.

  • Attachment point means a point on the network at which network assets are connected to assets owned by another person.

  • SRS means the scheme referred to by the Ministry of Finance as the Supplementary Retirement Scheme or such other scheme as shall replace or supersede the Supplementary Retirement Scheme from time to time.

  • Metering Point means, for meters that do not use instrument transformers, the point at which the billing meter is connected. For meters that use instrument transformers, the point at which the instrument transformers are connected.

  • aeroplane means a power-driven heavier-than-air aircraft, deriving its lift in flight chiefly from aerodynamic reactions on surfaces which remain fixed under given conditions of flight;

  • Service Descriptions means user manuals and other documentation relating to the Services that are made available to Customer by Provider in digital or hardcopy form, as updated from time to time.

  • Contract Unit Price means the total price per unit charged to DLA Troop Support for a product delivered to DLA Troop Support’s customers. The Contract unit price consists of three components: delivered price plus distribution price less Government rebates and discounts. The unit price sum of the three component prices shall be rounded up or down as applicable, to the nearest cent to determine the final Contract unit price.

  • Synchronous Optical Network (SONET means the optical interface standard that allows inter-networking of transmission products from multiple vendors. The base rate is 51.84 Mbps (“OC 1/STS 1”) and higher rates are direct multiples of the base rate, up to 13.22 Gbps.

  • IVR means Interactive Voice Response.

  • Continuous parameter monitoring system or "CPMS" means all of the equipment necessary to meet the data acquisition and availability requirements of this article, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Pilot or "Payment in Lieu of Tax" shall mean any payment made to the Agency or an affected tax jurisdiction equal to all or a portion of the real property taxes or other taxes which would have been levied by or on behalf of an affected tax jurisdiction with respect to a project but for tax exemption obtained by reason of the involvement of the Agency in such project, but such term shall not include Agency fees.

  • Energy Use Intensity (EUI means the kBTUs (1,000 British Thermal Units) used per square foot of gross floor area.

  • Service Description means pre-defined descriptions of services found at http://www.sap.com/servicedescriptions current as of the effective date of the Order Form which in conjunction with a Scope Document (if any) defines the Services to be provided and becomes part of the Order Form.

  • Multiple tomogram system means a computed tomography X-ray system which obtains X-ray transmission data simultaneously during a single scan to produce more than one tomogram.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • ACMPR means Access to Cannabis for Medical Purposes Regulations;

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.