Examples of Turbine Meter in a sentence
SizeThe size of the Turbine Meter Assembly shall be determined by the nominal size of the opening of the inlet and outlet flanges of the meter.
Available Turbine Meter Capacities The first step in the meter selection process is to determine the actual volumetric flow rate range.
Size Connection3-inch Round Flanged Ends with Rubber Ring Gaskets 4-inch Round Flanged Ends with Rubber Ring Gaskets 6-inch Round Flanged Ends with Rubber Ring Gaskets LengthThe overall length of the Turbine Meter Assembly, complete with strainer, test spool and/or spacers shall be the face-to-face dimensions as listed below: SIZE OF METER MAXIMUM LENGTH 3" 24”4” 29”6” 36.5” All Turbine Meter Assembly units shall be provided to the City at the maximum length indicated above.
Turbine Meter –To measure emissions a turbine meter is placed over an emissions source and the emissions pass through the tube.
Such Injected Liquids Turbine or Coriolis measurement devices shall be installed in accordance with the MPMS Chapter 5.3, November 2011, Measurement of Liquid Hydrocarbons by Turbine Meter, or MPMS Chapter 5.6 October 202, Reaffirmed March 2008, Measurement of Liquid Hydrocarbons by Coriolis Meters.
It is best to install a meter that is a billing Quality meter such as a Diaphragm, Rotary or Turbine Meter.
WARNING! LIFTING HAZARD The lifting instructions are for installation and removal of the Daniel Liquid Turbine Meter only and do not address lifting the turbine meter while it is attached or bolted to piping.
Turbine meters shall be installed and Gas volumes computed in accordance with the standards prescribed in AGA Report No. 7 "Measurement of Natural Gas by Turbine Meter".
Table 7-10Phase Two 3-inch Compound Meter Test Summary Accuracy Limits 97%-103% 97%-103%not less than 90% 97%-103% 97%-103% 97%-103% Low FlowTable 7-11Phase Two 4-inch Turbine Meter Test Summary Accuracy Limits95-101.598.5-101.598.5-101.5 Start FlowLow FlowInter.
The requirement of ‘confusability’ is understood since the essential function of the distinctive symbol – particularly that of a brand – is to identify the origin of the product or service which carries it.