Trench DRAM definition

Trench DRAM means a dynamic random access memory cell that functions employing a capacitor arrayed predominantly below the surface of the semiconductor substrate.

Examples of Trench DRAM in a sentence

  • Yang, L-T Liu, Z-J Li, Tsinghua University, Beijing, China Session 3: Integrated Circuits and Manufacturing – DRAMMonday, December 13, 1:30 p.m.Continental Ballroom 4Co-Chairs: Luan Tran, Micron Technology Harald Seidl, Infineon1:30 p.m.Introduction1:35 p.m.3.1 Highly Scalable Sub-50nm Vertical Double Gate Trench DRAM Cell, T.

  • The Joint Venture Company is engaged in the manufacture of Trench DRAM Products (as defined hereinafter).

  • The JV Parties shall use best efforts to cause the Joint Venture Company to ensure that Trench DRAM Manufacturing Capacity and Stack DRAM Manufacturing Capacity at each fab is allocated as provided for in this Section 7.2.

  • Key Rating WeaknessesWorking capital intensive operationCCIL’s operations are highly working capital intensive.

  • No more than one temporary use is allowed per lot or parcel at any one time, including those approved by the Land Use Authority.

  • Stargas maintains a limited rate base (363 customers), reflecting the scope of its operations.

  • Saraswat16:30 501 Recent Developments in ALD Technology for 50 nm Trench DRAM Applications - U.Schroeder, S.

  • Requests of Micron and NTC for products or product mixes different from the pre-planned Baseline Flow with respect to a fab shall be honored, except to the extent honoring such request would lead to wafer starts for the non-Baseline Flow products at such fab resulting in Micron or NTC receiving more than the Trench DRAM Manufacturing Capacity and or Stack DRAM Manufacturing Capacity allocated to such Person under the current Baseline Flow for such fab.

Related to Trench DRAM

  • Trench means 1. below-grade soil treatment area consisting of a shallow excavation with a width of 3 feet or less containing distribution media and one lateral; and 2. excavation for placement of piping or installation of electrical wire or conduit.

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.

  • Backflow prevention device means a safety device used to prevent pollution or contamination of the water supply due to the reverse flow of water from the irrigation system.

  • Polystyrene foam means blown polystyrene and expanded and

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Design Criteria Package means concise, performance-oriented drawings or specifications for a public construction project. The purpose of the Design Criteria Package is to furnish sufficient information to permit Design-Build Firms to prepare a bid or a response to the District’s Request for Proposals, or to permit the District to enter into a negotiated Design- Build Contract. The Design Criteria Package must specify performance- based criteria for the public construction project, including the legal description of the site, survey information concerning the site, interior space requirements, material quality standards, schematic layouts and conceptual design criteria of the project, cost or budget estimates, design and construction schedules, site development requirements, provisions for utilities, stormwater retention and disposal, and parking requirements applicable to the project. Design Criteria Packages shall require firms to submit information regarding the qualifications, availability, and past work of the firms, including the partners and members thereof.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Substrate means the surface onto which a coating is applied or into which a coating is impregnated.

  • Open type traction battery means a type of battery requiring liquid and generating hydrogen gas released to the atmosphere.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • PAD means a Preauthorized Debit.

  • Strain means the classification of marijuana or cannabis plants in either pure sativa, indica, afghanica, ruderalis, or hybrid varieties.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Duct is a single enclosed path to house facilities to provide Telecommunications Services.

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Expiry Date (Data di Scadenza) means the "Expiry Date" as specified in § 1 of the Product and Underlying Data.

  • Landing Gear means the installed main and nose landing gear, components and their associated actuators, side braces and parts.

  • Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.