Total solids definition

Total solids means the sum of suspended and dissolved solids.
View Source
Total solids means total solids are the total of all solids in a sample. They include the total suspended solids, total dissolved solids, and volatile suspended solids.
View Source
Total solids means total weight expressed in mg/l of all solids: dissolved, undissolved, organic, or inorganic.
View Source

Examples of Total solids in a sentence

  • Total solids are a minimum of 77.5 percent total non-volatiles by weight, when tested according to ASTM D 2369.

  • Color (solution ar 50 RDS) Clear to slightly straw colored, NMT 45 RBU Sucrose NLT 99.8% (dry basis) Ash by conductivity NMT 0.02% Sediment NMT 1ppm Total solids 67.5 +/- 0.2 (% by refractometer @ 20° C) Invert NMT 0.1% pH @ 20° C 7.5 +/- 0.5 11.105 lbs.

  • Requirements for Low Temperature WHITE and YELLOW Traffic Paint PROPERTY TEST METHOD REQUIREMENTS Binder ASTM D2621 infrared analysis Total solids ASTM D3723 60% min by volume Pigment ASTM D3723 58% to 62% by weight Lead ASTM D3335 0.06% max VOC ASTM D3960 150 g/l (1.25 lb/gal) max pH of the paint 9.6 min.

  • Total solids measurements were performed in triplicate and the average and %RSD are reported.

  • Total solids concentrations were independent of the test conditions.


More Definitions of Total solids

Total solids means the materials that remain as residue after the residuals have been dried at between 103 and 105 degrees Celsius until they reach a constant mass.
View Source
Total solids means the materials in the sewage sludge that remain as residue if the sludge is dried at 103 to 105 degrees Celsius.
View Source
Total solids means the materials in sewage sludge that remain as residue when the sewage sludge is dried at 103 to 105° Celsius.
View Source
Total solids means solids that either float on the surface of, or are in suspension or dissolved in water, Sewage or other liquids, and which are determined by an Accredited Laboratory.
View Source
Total solids means the materials in sewage sludge or sewage sludge material that remain as residue when the sewage sludge or sewage sludge material is dried at one hundred three to one hundred five degrees Celsius.
View Source
Total solids means solids that remain after all liquid has been evaporated, expressed in milligrams per liter. The values shall be as determined by the methods of Analytical Testing.
View Source
Total solids means solids determined by evaporating at 100°C a mixed sample of wastewater as determined pursuant to the procedure set forth in the latest edition of “Standard Method for the Extermination of Water and Wastewater”, published by the American Public Health Association. Total Solids include floating solids, Suspended Solids, Settleable Solids and Dissolved Solids, as defined below:
View Source