Theoretical definition

Theoretical means understanding, whereas ‘practical’ means experiencing. The experience of the Self happens within one hour only through the Science of Akram (Akram Vignan)! Otherwise, there is no such experience even after millions of arduous efforts for achieving the Self and for over millions of lifetimes!
Sample 1
Theoretical means improvement of the existing models (eg, by including the effect of white caps) or the development of new models (eg scattering from non-linear surfaces).
Sample 1
Theoretical influence on radiation fog by means of thermal sources and upright the descending airflows is carried out; are defined time of a dispelling of fog; optimum regime of influence are picked logically up.
Sample 1

Examples of Theoretical in a sentence

  • Theoretical quantity of G.I. & C.I. or other pipes, conduits, wires and cables, pig lead and G.I./M.S. sheets shall be taken as quantity actually required and measured plus 5% for wastage due to cutting into pieces (except in the case of G.I./M.S. sheets it shall be 10%), such determination & comparison being made diameter wise & category wise.

  • Obtain the Theoretical maximum Specific Gravity values from the corresponding laboratory sublot tests.2. Calculate the Degree of Compaction: Degree of Compaction =((Core Bulk Specific Gravity) / (Theoretical Maximum Specific Gravity)) x 100% recorded to the nearest 0.1%.3.

  • Theoretical quantity of steel reinforcement or structural steel sections shall be taken as the quantity required as per design or as authorized by Engineer-in-Charge, including authorized lap pages, chairs etc.

  • Theoretical quantity of steel reinforcement or structural steel sections shall be taken as the quantity required as per design or as authorized by Engineer-in-Charge, including authorized lappages, chairs etc.

  • For payment of Running Account Bills, the mandatory documents, like copy of paid challans of PF/ ESI, Royalty (if applicable), paid bills of water& electricity, copy of Workmen Compensation Policy, copy of labour license, Theoretical Consumption Statement of Cement, Steel &Bitumen, Invoice of cement, steel & bitumen, test reports, Proof of deployment of Site Engineer etc, shall be required at the time of Ist RA bill & final bill.

  • ToropinInstitute for Theoretical and Experimental Physics, Moscow, RussiaV.

  • Theoretical bases of communicative approaches to second language teaching and testing.

  • Theoretical quantity of G.I. & C.I. or other pipes, conduits, wires and cables, pig lead and G.I./M.S. sheets shall be taken as quantity actually required and measured plus 5% for wastage due to cutting into pieces (except in the case of G.I./M.S. sheets it shall be 10%), such determination & comparison being made diameter wise and category wise.

  • You will receive the relevant risk parameters via the Theoretical Price Files after the product set-up in the Eurex® system.

  • Theoretical studies are not a permissible means of showing labor inefficiencies.

Related to Theoretical

  • Carcass means the dead body of any wild animal to which it refers, including the head, hair, skin, plumage, skeleton, or any other part thereof.

  • Sustainability Factors means environmental, social and employee matters, respect for human rights, anti‐corruption and anti‐bribery matters.

  • Stress Factor means 2.25.

  • Metric means a) when referenced in the context of a Named User, the individual Named User category and type (and corresponding Named User definition setting for such Named User’s use rights) as further described in Section 2.1 hereof -and- b) when referenced in the context of a Package, the individual business metric corresponding with each Package as further described in Section 2.2 hereof;

  • Measurement Point means the emission source for which continuous emission measurement systems (CEMS) are used for emission measurement, or the cross-section of a pipeline system for which the CO2 flow is determined using continuous measurement systems;

  • Loss Factor means the scaling factor determined in accordance with clause 7 and applied by the reconciliation manager to volumes of electricity measured or estimated in respect of ICPs on the Network, in order to reflect the impact of the ICP on Losses within the Network;

  • average consumption means the average consumption of a customer of a municipal service during a specific period, and is calculated by dividing the total measured consumption of that municipal service by that customer over the preceding three months by three;

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Technique factors means the following conditions of operation:

  • The Product means all of the software or softwares, all hardware, database, middleware, operating systems and/or other materials which the Supplier is required to supply to the Bank under the Contract;

  • congestion means a situation where the demand for transmission capacity exceeds the available transfer capability

  • Congestion Price means the congestion component of the Locational Marginal Price, which is the effect on transmission congestion costs (whether positive or negative) associated with increasing the output of a generation resource or decreasing the consumption by a Demand Resource, based on the effect of increased generation from or consumption by the resource on transmission line loadings, calculated as specified in Operating Agreement, Schedule 1, section 2, and the parallel provisions of Tariff, Attachment K-Appendix, section 2.

  • MSCF means one thousand standard cubic feet.

  • Yearly (1/Year) sampling frequency means the sampling shall be done in the month of September, unless specifically identified otherwise in the effluent limitations and monitoring requirements table.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • Vapor tight means equipment that allows no loss of vapors. Compliance with vapor-tight requirements can be determined by checking to ensure that the concentration at a potential leak source is not equal to or greater than 100 percent of the lower explosive limit (LEL) when measured with a combustible gas detector, calibrated with propane, at a distance of 1 inch (2.54 cm) from the source.

  • Coefficient means a number that represents the quantified relationship of each variable to the assessed value of a property when derived through a mass appraisal process

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Sustainability Risk means an environmental, social or governance event or condition that, if it occurs, could cause an actual or a potential material negative impact on the value of the investment;

  • Reference evapotranspiration or “ETo” means a standard measurement of environmental parameters which affect the water use of plants. ETo is given expressed in inches per day, month, or year as represented in Appendix C of these Guidelines, and is an estimate of the evapotranspiration of a large field of four to seven-inch tall, cool-season grass that is well watered. Reference evapotranspiration is used as the basis of determining the Maximum Applied Water Allowances.

  • Tomogram means the depiction of the x-ray attenuation properties of a section through the body.

  • Exotic ’ means any automobile which is not a standard Rental Auto offered by most of the Rental Agencies in the province or state, or in a country without provinces or states, where the vehicle was rented or is a vehicle totally or partially custom made, hand made, hand finished or is a vehicle of limited production (under 2,000 vehicles per year by the manufacturer). Exotic automobiles include, but are not limited to the following models: Aston Martin, Bentley, Bricklin, Daimler, De Lorean, Excalibur, Ferrari, Jaguar, Jensen, Lamborghini, Lotus, Maserati, Porsche, Rolls Royce and limousines.

  • Weighting with respect to an Underlying means the weighting in relation to the relevant Underlying as specified in the table in the definition of such Underlying.

  • Weighting factor wT for an organ or tissue (T) means the proportion of the risk of stochastic effects resulting from irradiation of that organ or tissue to the total risk of stochastic effects when the whole body is irradiated uniformly. For calculating the effective dose equivalent, the values of wT are:

  • Semi-annual (2/Year) sampling frequency means the sampling shall be done during the months of June and December, unless specifically identified otherwise.

  • Anaerobic digestion ’ means a controlled process involving microbial decomposition of organic matter in the absence of oxygen ;