Tenant’s Fitting Out Works definition

Tenant’s Fitting Out Works means the works to be carried out by the Tenant at its own expense to fit out the Property for use and occupation;
Sample 1Sample 2
Tenant’s Fitting Out Works means all renovation and fitting out works relating only to the erection of partitions, the installation of machinery and the installation of furniture to be carried out by the Tenant at or to the Premises;
Sample 1

Examples of Tenant’s Fitting Out Works in a sentence

  • In my judgment the judge was clearly correct in describing the tiled carpets as landlord’s fixtures and fittings, regardless of the fact that they were re-laid at the tenant’s cost at the start of the term, and that both the Lease itself and the Agreement for Lease provided that the Tenant’s Fitting Out Works were to be disregarded on any rent review.

  • Much the largest part of the Tenant’s Fitting Out Works consisted of the installation of lifts which, on any view, were to become part of the fabric of the Building, rather than a fixture, so that the provision for payment by the tenant for the fitting out works is of no weight in deciding to whom the carpets belonged.

Related to Tenant’s Fitting Out Works

  • Installation Works means, as the context so requires,

  • Trade Fixtures means Lessee’s machinery and equipment that can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. “Lessee Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a).

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Customer Premises Equipment or "CPE" means equipment employed on the premises of a Person other than a Carrier to originate, route or terminate Telecommunications (e.g., a telephone, PBX, modem pool, etc.).

  • Work area means a room or defined space in a workplace where hazardous chemicals are produced or used, and where employees are present.

  • Tenant Improvements Defined in Exhibit B, if any.

  • Tenant Improvement Work means the construction of the Tenant Improvements, together with any related work (including demolition) that is necessary to construct the Tenant Improvements.

  • Roof means a non-porous cover for a structure such as (by way of example and not limitation) Lexan barriers or shingles but not a shade trellis, ivy or other open or porous material that may also be used as a cover.

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.

  • Premises Building Partial Damage means if the Building of which the Premises are a part is damaged or destroyed to the extent that the cost to repair is less than fifty percent of the then replacement cost of the Building.

  • Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.

  • Outside Areas means all areas within the Property which are located outside the buildings, such as pedestrian walkways, parking areas, landscaped areas, open areas and enclosed trash disposal areas.

  • Tenant’s Personal Property means all motor vehicles, Inventories, FAS and any other tangible personal property of Tenant, if any, acquired by Tenant at its election and with its own funds on and after the date hereof and located at the Leased Property or used in Tenant's business at the Leased Property and all modifications, replacements, alterations and additions to such personal property installed at the expense of Tenant, other than any items included within the definition of Proprietary Information.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Tenant’s Work means all improvements, alterations, fixture, equipment, and signage installation, and furniture placement necessary or appropriate for the conduct of the Permitted Use, including all work described as Tenant’s Work on Exhibit D, attached (the “Work Letter”).

  • Tenant Work All work installed or furnished to the Premises by Tenant in connection with Tenant’s initial occupancy pursuant to Rider 2 and the Workletter.

  • Carpet Area means the net usable floor, area of an Flat/Apartment, excluding the area covered by the external walls, areas under services shafts, excluding balcony or verandah area and exclusive open terrace, but includes the area covered by the internal partition walls of the flat/apartment;

  • Customer’s Installation means an Electrical Installation and includes Distributed Generation, if Distributed Generation is connected to a Customer's Installation; "Customer’s Premises" means the land and buildings owned or occupied by a Customer, and any land over which the Customer has an easement or right to pass electricity, including:

  • Digital audio-visual works which means a series of related images which, when shown in succession, impart an impression of motion, together with accompanying sounds, if any;

  • Digital audio-visual work means a series of related images which, when shown in succession, imparts an impression of motion, together with accompanying sounds, if any.

  • Tight-fitting facepiece means a respiratory inlet covering that forms a complete seal with the face.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Industrial Center and interior utility raceways within the Premises that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other lessees of the Industrial Center and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, sidewalks, walkways, parkways, driveways and landscaped areas.

  • Installation Site means the site at which the Product is originally installed.

  • Furniture coating means any paint designed for application to room furnishings including, but not limited to, cabinets (kitchen, bath and vanity), tables, chairs, beds, and sofas.