Technical Assumption definition

Technical Assumption means any assumptions (other than an Economic Assumption), and the values ascribed to such assumptions, upon which each Projection or draft Projection and, in each case, the calculations and information therein are, or are to be, based.

Examples of Technical Assumption in a sentence

  • Technical Assumption: A1 implies the existence of the following threshold in atrade economy: given ∀uM ∈ (0, y), ∃ q^(uM ) : y(q) ≤ f (q) + uM,81for q ≥ q^(uM ).

  • These updated values were originally omitted from the Deemed Savings Sheet in the 2014 DSM Plan (Docket No. 13A-0773EG) as filed, but were included in the Forecast Technical Assumption sheets.These proposed changes result in the following updated energy savings and expenditure forecasts for the 2014 performance of the HPwES product.

  • Noted there is that with respect to Section 2.1, Page 3, Technical Assumption 7: WGI estimates that 900 cys of off-site imported backfill material will be necessary for backfilling the removed foundations.

  • The evaluation team found no incidents of deviation from the Technical Assumption documents.

  • Regular supervision missions and a mid-term review tracked progress and identified challenges .The PAD noted that Early Learning Development Standards (ELDS) were being developed with support from UNICEF; their completion was expected by early 2011 and would, if available, be used to assess the outcomes of the preparatory program.

  • From (34) and the Technical Assumption in the main text we have: Exi,t+1 = QExi t +µA.The above expression leads to (36) once we note that the stationarity of xi t implies Exi,t+1 = Exi t .Equation (37) follows from (36) and Technical Assumption 3.

  • In that year, ICES proposed that the nations fishing the Kattegat should draw up a treaty prohibiting the landing of undersized plaice, which was to be a recurring theme (ICES, 1905).By 1906, the Council felt the need to ask the nine Member Countries1 to identify national priorities con­ cerning issues on which they might wish ICES to com­ ment.

  • It is shown that, generally, as would be expected, the more total heating hours, the higher the mean living room temperature observed.

  • These updated values were originally omitted from the Deemed Savings sheet in the 2014 DSM Plan (Docket No. 13A-0773EG) as filed, but were included in the Forecast Technical Assumption sheets.3. Water Heating Measures – PSCo has modified incremental costs for the 67% AFUE Water Heater and 90% AFUE Tankless Water Heater.

  • I assume:A.1. (First Stage Independence) The random variable νU − νT is independent of Z condi- tional on X, which implies that F (νU − νT | X), denoted as UD, is independent of Z conditional on X.A.2. (First Stage Technical Assumption) The cumulative distribution function of νU − νTconditional on X, which I denote with F , is continuous and strictly increasing.

Related to Technical Assumption

  • Incremental Assumption Agreement means an Incremental Assumption Agreement in form and substance reasonably satisfactory to the Administrative Agent, among the Borrower, the Administrative Agent and, if applicable, one or more Incremental Term Lenders and/or Incremental Revolving Facility Lenders.

  • Acceptance Letter means the letter from Adviser to BD pursuant to which the Adviser appoints BD as a Broker Dealer for each series of MuniPreferred issued by any Fund that has executed a Request Letter.

  • Design-Build Agreement means the design and construction agreement between Project Co and the Design-Builder, a certified copy of which has been delivered by Project Co to the Authority, as amended, supplemented or replaced from time to time in accordance with this Agreement;

  • Alternative Diesel Fuel means any fuel used in a CI engine that is not commonly or commercially known, sold, or represented by the supplier as diesel fuel No. 1-D or No. 2-D, pursuant to the specifications in ASTM D975-81, “Standard Specification for Diesel Fuel Oils,” as modified in May 1982, which is incorporated herein by reference, or an alternative fuel, and does not require engine or fuel system modifications for the engine to operate, although minor modifications (e.g., recalibration of the engine fuel control) may enhance performance. Examples of alternative diesel fuels include, but are not limited to, biodiesel that does not meet the definition of CARB diesel fuel; Fischer-Tropsch fuels; emulsions of water in diesel fuel; and fuels with a fuel additive, unless:

  • Prepayment Assumption As defined in the Prospectus Supplement.

  • Valuation Assumptions means, as of an Early Termination Date, the assumptions that (1) in each Taxable Year ending on or after such Early Termination Date, the Corporate Taxpayer will have taxable income sufficient to fully utilize the deductions arising from the Basis Adjustments and Imputed Interest during such Taxable Year or future Taxable Years (including, for the avoidance of doubt, Basis Adjustments and Imputed Interest that would result from future Tax Benefit Payments that would be paid in accordance with the Valuation Assumptions) in which such deductions would become available, (2) the U.S. federal income tax rates and state and local income tax rates that will be in effect for each such Taxable Year will be those specified for each such Taxable Year by the Code and other law as in effect on the Early Termination Date, (3) any loss carryovers generated by deductions arising from Basis Adjustments, the NOLs or Imputed Interest that are available as of such Early Termination Date will be utilized by the Corporate Taxpayer on a pro rata basis from the Early Termination Date through the scheduled expiration date of such loss carryovers, (4) any non-amortizable assets will be disposed of on the fifteenth anniversary of the applicable Basis Adjustment; provided, that in the event of a Change of Control, such non-amortizable assets shall be deemed disposed of at the time of sale of the relevant asset (if earlier than such fifteenth anniversary), and (5) if, at the Early Termination Date, there are Common Units that have not been Exchanged, then each such Common Unit shall be deemed to be Exchanged for the Market Value of the number of shares of Class A Common Stock and the amount of cash that would be transferred if the Exchange occurred on the Early Termination Date.

  • Final completion and acceptance means the stage in the progress of the work as determined by the Contracting Officer and confirmed in writing to the Contractor, at which all work required under the contract has been completed in a satisfactory manner, subject to the discovery of defects after final completion, and except for items specifically excluded in the notice of final acceptance.

  • AGREED AND ACCEPTED DELAWARE SERVICE COMPANY, INC. DELAWARE GROUP GLOBAL & INTERNATIONAL FUNDS for its series set forth in this Schedule A By: /s/ Xxxxxxx X. Xxxxxxxx By: /s/ Xxxxx X. Xxxxxx ---------------------------- -------------------------------- Name: Xxxxxxx X. Xxxxxxxx Name: Xxxxx X. Xxxxxx Title: Senior Vice President Title: President SCHEDULE B SHAREHOLDER SERVICES AGREEMENT COMPENSATION SCHEDULE DELAWARE INVESTMENTS FAMILY OF FUNDS EFFECTIVE AS OF APRIL 19, 2001

  • Commercial use request means a re- quest from or on behalf of one who seeks information for a use or purpose that furthers the commercial, trade, or profit interests of the requester or the person on whose behalf the request is made.

  • Assignment and Acceptance Agreement means an assignment and acceptance agreement entered into by a Lender, an Eligible Assignee and the Administrative Agent, and, if required, the Borrower, pursuant to which such Eligible Assignee may become a party to this Agreement, in substantially the form of Exhibit C hereto.

  • Design-build means a project delivery method in which the detailed design and subsequent construction is provided through a single contract with a Design-Build firm; a team, partnership, or legal entity that includes design professionals and a builder. The Design-Build Project delivery shall be implemented in accordance with Tex. Gov’t Code § 2166.2531.2

  • CREFC® Assumption Modification Posting Instructions Template A report substantially in the form of, and containing the information called for in, the downloadable form of the “Assumption Modification Posting Instructions Template” available as of the Closing Date on the CREFC® Website, or such other form for the presentation of such information and containing such additional information as may from time to time be approved by the CREFC® for commercial mortgage securities transactions generally.

  • Incremental Term Loan Assumption Agreement means an Incremental Term Loan Assumption Agreement among, and in form and substance reasonably satisfactory to, the Borrower, the Administrative Agent and one or more Incremental Term Lenders.

  • Incremental Auction Revenue Rights means the additional Auction Revenue Rights, not previously feasible, created by the addition of Incremental Rights-Eligible Required Transmission Enhancements, Merchant Transmission Facilities, or of one or more Customer- Funded Upgrades.

  • Acceptance Testing mean the tests, reviews and other activities that are performed by or on behalf of Agency to determine whether the Deliverables meet the Acceptance Criteria or otherwise satisfy the Agency, as determined by the Agency in its sole discretion.

  • nment and Assumption means an assignment and assumption agreement entered into by a Lender and an assignee (with the consent of any party whose consent is required by Section 9.04), and accepted by the Administrative Agent, in the form of E xhibit A or any other form approved by the Administrative Agent.

  • Design-Build Firm means a partnership, corporation or other legal entity that:

  • Design-build contract means a single contract with a Design-Build Firm for the design and construction of a public construction project.

  • Design-build entity means a partnership, corporation, or other legal entity that is able to provide appropriately licensed contracting, architectural, and engineering services as needed pursuant to a design-build contract.

  • Design-Builder means the Person selected pursuant to the RFP that enters into the Contract with the Department to design and construct the Project (also referred to as the “Design-Build Team”).

  • Technical Bid means the bid submitted online through the electronic bidding platform, containing the documents as listed out in Clause 2.5.2 of this RFP;

  • Assignment and Assumption of Lease has the meaning set forth in Section 3.02(a)(v).

  • Assignment and Assumption means an assignment and assumption entered into by a Lender and an Eligible Assignee (with the consent of any party whose consent is required by Section 10.06(b)), and accepted by the Administrative Agent, in substantially the form of Exhibit E or any other form approved by the Administrative Agent.

  • Support Request means a request for assistance received by Blackboard's Service Desk and/or Service Desk Infrastructure from an Authorized User, such as any answered phone call, answered email, or answered chat.

  • Service Component means certain enabling Software, hardware peripherals and associated documentation which may be separately provided by Symantec as an incidental part of a Service.

  • Technical Support Services means the technical support and maintenance Services provided by us according to our then-current technical support policy and procedure listed at xxxxxxxxxxxxx.xxx (“Technical Support Policy”) when the Services are purchased.