Surfacing material definition

Surfacing material means material that is sprayed, troweled-on or otherwise applied to surfaces (such as acoustical plaster on ceilings and fireproofing materials on structural members, or other materials on surfaces for acoustical, fireproofing, and other purposes).
Sample 1Sample 2Sample 3
Surfacing material means material that is sprayed-on, troweled-on, or otherwise applied to surfaces including, but not limited to, acoustical plaster on ceilings, paints, fireproofing material on structural members, or other material on surfaces for decorative purposes.
Sample 1Sample 2Sample 3
Surfacing material. Means material in a building that is sprayed on, troweled on, or otherwise applied to surfaces, such as acoustical plaster on ceilings and fire-proofing materials on structural members, or other materials on surfaces for acoustical, fire-proofing, or other purposes. (5-18-92)
Sample 1Sample 2Sample 3

Examples of Surfacing material in a sentence

  • Thermal system insula- tion that has retained its structural in- tegrity and that has an undamaged protective jacket or wrap that prevents fiber release shall be treated as nonfri- able and therefore is subject only to periodic surveillance and preventive measures as necessary.§ 763.86 Sampling.(a) Surfacing material.

  • Reg 278/05 Type of MaterialSize of Area of Homogeneous MaterialMinimum Number of Samples Surfacing material, including without limitation material that is applied to surfaces by spraying, by troweling or otherwise.

  • Protective Surfacing — Surfacing material in the use zone that conforms to the recommendations in Section 4.5 of this handbook.

  • Ensure that the machine is equipped with opposite side driving stations to optimize longitudinal alignment and allow the operator to have full hydrostatic control of the forward and reverse speed during the application of the Micro Surfacing material.

  • Surfacing material shall come from the pit(s) designated in the “Construction Specifications” unless it is found that the material in the ditch is suitable for surfacing and hence surfacing material need not be trucked from the designated pit(s).

  • Surfacing material and depth shall be specified and installed according to the Department's standard design specifications and the conditions and future use of the access and the highway.

  • Surfacing material may include approved grades of gravel, concrete pavement, and bituminous pavement.

  • Micro Surfacing material required to repair deficiencies due to unsatisfactory workmanship will be entirely at the contractor’s expense.

  • Surfacing material coverage shall extend beyond the equipment a distance that meets or exceeds the fall zone required around the equipment.

  • This section covers the materials, equipment, construction and application procedures for placing Micro Surfacing material for filling ruts and for surfacing existing paved surfaces.


More Definitions of Surfacing material

Surfacing material means material that is sprayed-on, troweled-on or otherwise applied to surfaces (such as acoustical plaster on ceilings and fireproofing materials on structural members, or other materials on surfaces for acoustical, fireproofing, and other purposes). Because this Building was constructed prior to 1981, PACM may be present. Our asbestos survey(s) for the Building note the presence, location and quantity of the PACM as follows: • Roof: penthouse, thermal pipe insulation; and boiler room, hot water heater insulation. The fact that our survey(s) may identify such materials as PACM does not necessarily mean that no other PACM exists in the Building. Please be advised that if any thermal system insulation, asphalt or vinyl flooring or surfacing material, of the type described above, are found to be present in the Building, such materials must be considered PACM unless properly tested and shown otherwise. Because of the potential presence of PACM in the Building, we are providing you with the following warning, which is commonly known as a California Proposition 65 warning:
Sample 1Sample 2
Surfacing material means material that is sprayed, troweled-on, or otherwise applied to surfaces (such as acoustical plaster on ceilings and fireproofing on structural members).
Sample 1Sample 2
Surfacing material means material in a school
Sample 1
Surfacing material means material that is sprayed-on, troweled-on or otherwise applied to surfaces (such as acoustical plaster on ceilings and fireproofing materials on structural members, or other materials on surfaces for acoustical, fireproofing, and other purposes). Because this Building was constructed prior to 1981, PACM may be present. The fact that our survey(s) may identify such materials as PACM does not necessarily mean that no other PACM exists in the Building. Please be advised that if any thermal system insulation, asphalt or vinyl flooring or surfacing material, of the type described above, are found to be present in the Building, such materials must be considered PACM unless properly tested and shown otherwise. Because of the presence of ACM and the potential presence of PACM in the Building, we are providing you with the following warning, which is commonly known as a California Proposition 65 warning: WARNING: This Building contains asbestos, a chemical known to the State of California to cause cancer. In addition, you should be aware that there are certain potential health risks that may result from exposure to asbestos. Because we are not physicians, scientists or industrial hygienists, we have no special knowledge of the health impact of exposure to asbestos. However, we hired an environmental consulting firm to prepare an asbestos Operations and Maintenance Plan ("O&M Plan") to address asbestos matters at the Building. The O&M Plan is designed to minimize the potential for a release of asbestos fibers and outlines a schedule of actions to be undertaken with respect to asbestos. The written O&M Plan is available for your review at our Building Management Office during regular business hours, and a copy of the O&M Plan will be provided to you upon request. In general, the written O&M Plan describes the risks associated with asbestos exposure and how to prevent such exposure. The O&M Plan describes those risks as follows: asbestos is not a significant health concern unless asbestos fibers are released and inhaled. If inhaled, asbestos fibers can accumulate in the lungs and, as exposure increases, the risk of disease (such as asbestosis and cancer)
Sample 1

Related to Surfacing material

  • propagating material means plants and parts thereof that are intended for plant cultivation.

  • Building materials means such commodities or articles as are specified by the Administrator by notification to be building materials for the purposes of this Act;

  • Asbestos-containing material or “ACM” means asbestos or any material containing more than one percent (1%) asbestos as determined using methods specified in 40 CFR 763, Subpart E, Appendix E, Section I, Polarized Light Microscopy* including Category I and Category II ACM and all friable material.

  • Charcoal lighter material means any combustible material designed to be applied on, incorporated in, added to, or used with charcoal to enhance ignition. “Charcoal Lighter Material” does not include any of the following: (A) electrical starters and probes, (B) metallic cylinders using paper tinder, (C) natural gas,

  • Existing Material means Material developed independently of this Agreement that is incorporated in or supplied as part of Reporting Material or Activity Material.

  • Contaminated soil means soil that meets all of the following criteria:

  • Explosive material means any chemical compound, mixture, or device which produces a substantial instantaneous release of gas and heat spontaneously or by contact with sparks or flame.

  • Recyclable material means a material which would otherwise become municipal waste, which can be collected, separated or processed, and returned to the economic mainstream in the form of raw materials or products.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Manufacturing Materials means parts, tools, dies, jigs, fixtures, plans, drawings, and information produced or acquired, or rights acquired, specifically to fulfill obligations set forth herein.

  • Recyclable Materials means materials that are separated from mixed municipal solid waste for the purpose of recycling or composting, including paper, glass, plastics, metals, automobile oil, batteries, source-separated compostable materials, and sole source food waste streams that are managed through biodegradative processes. Refuse-derived fuel or other material that is destroyed by incineration is not a recyclable material. (Minn. Stat. § 115A.03, Subd. 25a)

  • Friable asbestos material means any material that contains more than 1% asbestos by weight and that can be crumbled, pulverized, or reduced to powder, when dry, by hand pressure.

  • Combustible material means combustible refuse, combustible waste or any other material capable of igniting;

  • Training Materials means any and all materials, documentation, notebooks, forms, diagrams, manuals and other written materials and tangible objects, describing how to maintain the Facilities, including any corrections, improvements and enhancements thereto to the Bloom Systems which are delivered by Operator to Owner, but excluding any data and reports delivered to Owner.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Marketing Material means customary bank books, marketing material and information memoranda regarding the business, operations, financial condition and projections of the Company and the Company Subsidiaries, including all customary information relating to the transactions contemplated hereunder, to be used by Parent or its Financing Sources in connection with the syndication or other marketing of the Debt Financing.

  • Packaging Materials means art and mechanical formats for a Software Title including the retail packaging, end user instruction manual with end user license agreement and warranties, end user warnings, FPU media label, and any promotional inserts and other materials that are to be included in the retail packaging.

  • Radioactive material means any solid, liquid, or gas which emits radiation spontaneously.

  • Advertising Materials means any advertising, marketing, merchandising, promotional, public relations (including press releases) and display materials relating to or concerning Licensed Products or proposed Licensed Products, or any other advertising, merchandising, promotional, public relations (including press releases) and display materials depicting any of the Licensed Trademarks. For purposes of this Agreement, Advertising Materials include any advertisements in which the System is referred to or used in any way, including but not limited to giving the System away as prizes in contests or sweepstakes and the public display of the System in product placement opportunities.

  • Genetic material means any material of plant, animal, microbial or other origin containing functional units of heredity.

  • Contaminated site means a site where there is a confirmed presence, caused by man, of hazardous substances of such a level that they pose a significant risk to human health or the environment taking into account current and approved future use of the land;

  • Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).

  • Standard Materials means all Materials not specified as Custom Materials.

  • Construction material means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.

  • nanomaterial means a natural, incidental or manufactured material containing particles in an unbound state or as an aggregate or as an agglomerate and where, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range 1-100 nm;

  • Adapted Material means material subject to Copyright and Similar Rights that is derived from or based upon the Licensed Material and in which the Licensed Material is translated, altered, arranged, transformed, or otherwise modified in a manner requiring permission under the Copyright and Similar Rights held by the Licensor. For purposes of this Public License, where the Licensed Material is a musical work, performance, or sound recording, Adapted Material is always produced where the Licensed Material is synched in timed relation with a moving image.