Standard Seat definition

Standard Seat means seats in Economy Class that are not in the following category of seats: “Legroom” or “Exit” or “Two by Two” or “Front of Cabin”
Sample 1Sample 2Sample 3
Standard Seat means seats in Economy Class that are not in the following category of seats: “Legroom” or “Exit” or “Two by Two” or “Front of Cabin” "Tarmac Delay" means the holding of an aircraft on the ground after departure from the gate, or upon landing, without access to a gate or terminal.
Sample 1

Examples of Standard Seat in a sentence

  • The test device for add-on re- straint systems manufactured on or after August 1, 2005 is a standard seat assembly consisting of a simulated ve- hicle bench seat, with three seating po- sitions, which is depicted in Drawing Package, ‘‘NHTSA Standard Seat As- sembly; FMVSS No. 213, No. NHTSA– 213–2003,’’ (consisting of drawings and a bill of materials) dated June 3, 2003 (in- corporated by reference; see § 571.5).

  • For Economy Class, we will facilitate one accompanying adult with the child in Standard Seat zone, this does not include a particular seat assignment.

  • Service will be made available to Customer via one or more of the following levels: Standard Seat: LightEdge will provide Customer with Communicator Web Access, Instant Messaging, File Transfer, Peer-to-peer Voice and Video, Presence Indication based on Exchange calendaring, Presence Indication based on IM status and Presence Indication based on phone availability (on compatible platforms).

  • The One set of Round-trip Standard Seat Flight Tickets for One Passenger from Hong Kong to Japan (Osaka or Okinawa) arranged by hutchgo.com HK include round-trip checked baggage fee for one passenger (1 single baggage with max 20kg) and advance standard seat selection fee.

  • Web site: http://www.nhtsa.gov.(1) Drawing Package, ‘‘NHTSA Standard Seat Assembly; FMVSS No. 213, No. NHTSA–213–2003,’’ (consisting of drawings and a bill of materials), June 3, 2003, into § 571.213.(2) Drawing Package, SAS–100–1000,Standard Seat Belt Assembly with Addendum A, Seat Base Weldment (consisting of drawings and a bill of materials), October 23, 1998, into§ 571.213.

  • Dimensions and other details regarding the cushion assembly can be found in Child Frontal Impact Sled-V2, NHTSA Standard Seat Assembly; FMVSS No. 213, No. NHTSA-213-2016, Drawing Package, November 2016.

  • The test device for add-on restraint systems manufactured before date 3 years after publication date of final rule] is a standard seat assembly consisting of a simulated vehicle bench seat, with three seating positions, which is depicted in Drawing Package, ‘‘NHTSA Standard Seat Assembly; FMVSS No. 213, No. NHTSA–213–2003,’’ (consisting of drawings and a bill of materials) dated June 3, 2003 (incorporated by reference; see § 571.5).

  • The test device for add-onrestraint systems manufactured on or after [ date 3 years after publication date of final rule] is a standard seat assembly consisting of a simulated vehicle rear seat which is depicted in Drawing Package, ‘‘NHTSA Standard Seat Assembly; FMVSS No. 213, No.NHTSA–213–2019,’’ (consisting of drawings and a bill of materials) dated May 2019 (incorporated by reference; see § 571.5).

  • The material may be obtained from the sources in the following paragraphs of this section.* * * * *(k) * * *(5) ‘‘Parts List and Drawings, NHTSA Standard Seat Assembly; FMVSS No. 213a—Side impact No. NHTSA–213a- 2021, CHILD SIDE IMPACT SLED’’ dated December 2021; into § 571.213a.(l) * * *(4) SAE Recommended Practice J211/ 1, ‘‘Instrumentation for Impact Tests-Part 1—Electronic Instrumentation’’; revised March 1995; into §§ 571.202a; 571.208; 571.213a; 571.218; 571.403.* * * * *■ 3.

  • The journey of this One set of Round-trip Standard Seat Flight Tickets for One Passenger from Hong Kong to Japan (Osaka or Okinawa) must begin and end in Hong Kong, and must carry by the same selected airline.

Related to Standard Seat

  • Standard Service means Facilities which meet good economic electric industry practice including safety, reliability and operating criteria and standards consistent with the particular characteristics of service as determined by FortisAlberta acting reasonably;

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Enclosure means the part enclosing the internal units and providing protection against any direct contact.