Stage Inspections definition

Stage Inspections. The Contractor / fabricator shall invariably use the steel angles manufactured by SAIL, VSP, TISCO and ISCO only for the fabrication of Line and Substation structures. The angles which are not manufactured by the above primary producers can procure from any other TSTRANSCO approved re-roller. However the fabricator /re-roller should offer for single stage inspection i.e., finished material after fabrication. The cost of stage inspection, 3rd party laboratory charges and any other testing charges and samples collection expenses are to the account of contractor and shall include cost of the material while quoting. INSPECTION, DURING ERECTION: The provisions of the clauses entitled in the specification for other sections Inspection, Testing and Inspection Certificates shall also be applicable to the erection portion of the Works. The PURCHASER/ENGINEER shall have the right to re‑inspect any equipment though previously inspected and approved by him, at the CONTRACTOR's works, before and after the same are erected at Site. If by the above inspection, the PURCHASER/ENGINEER rejects any equipment, the CONTRACTOR shall make good for such rejections either by replacement or modifications/repairs as may be necessary to the satisfaction of the PURCHASER/ENGINEER. Such replacements will also include the replacements or re‑execution of those works of other CONTRACTORS and/or agencies, which might have got damaged or affected by the replacements or re‑work done by the CONTRACTOR's work.
View Source

Examples of Stage Inspections in a sentence

  • Key Stage Inspections benchmark the quality and compliance of the works.

  • Key Stage Inspections were developed to deliver the best possible end-product.

  • The bottom line is that Key Stage Inspections can help all parties avoid very costly rectification works to base construction and the remedial works to the artificial turf or polymeric surfaces.

  • Synthetic Turf Surfaces Natural & Hybrid Turf Fields Hockey Surfaces Goal Post Testing GMAX Tennis Courts Athletic Tracks NFL Playground Surfaces Impact Attenuation Surfaces Slip Resistance Indoor Floors Netball Soccer & Futsal Surfaces Key Stage Inspections Sports Labs are world leading experts in sports surface testing and certification.

  • Critical Stage Inspections A.1 The AC/PCA (or another AC agreed to by the PCA) shall carry out the critical stage inspections as are prescribed in the Regulations and other required inspections contained in the Notice to the client issued by the PCA under S.81A of the Act and C1.103A of the regulations.

  • You as the person appointing the Principal Certifying Authority are responsible to ensure that all Mandatory Critical Stage Inspections are carried out by ensuring that the Principal Certifying Authority is notified forty eight (48) hours before the inspection is required.

  • Key Stage Inspections benefit the contractors by providing them as much time as possible to resolve any problems.

  • An early claim to fame for Sports Labs was the implementation of Key Stage Inspections (KSI) to the construction of the whole of the base works of an artificial pitch or track.

  • Key Stage Inspections are typically made at the following stages and may include inspection works, testing or both.

Related to Stage Inspections

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Lead inspection means a surface-by-surface investigation to determine the presence of lead-based

  • Maintenance Inspection Report shall have the meaning set forth in Clause 15.2; “Maintenance Manual” shall have the meaning ascribed to it in Clause 10.7; “Maintenance Programme” shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause 14.2;

  • Final Inspection means the process and procedure described in UGC Section 12.

  • Certificate of inspection means an unsworn statement,