Spray booth cleaning definition

Spray booth cleaning means an industrial cleaning unit operation conducted to clean all interior surfaces of a spray booth and all equipment within the booth including, but not limited to, conveyors, floor, grating, robots, and spray booth walls.
Sample 1Sample 2Sample 3

Examples of Spray booth cleaning in a sentence

  • The quantity of spent organic HAPsolvent generated from each washoffand cleaning operation each month, and whether it is recycled onsite or disposed offsite.* * * * *(f) Spray booth cleaning.

  • Spray booth cleaning ‐ The Permittee or operator shall not use compounds containing more than 8.0 percent by weight of VOC for cleaning spray booth components other than conveyors, continuous coaters and total enclosures, or metal filters.

  • Each owner or operator of an affected source shall develop an organic HAP solventaccounting form to record:(1) The quantity and type of organic HAP solvent used each month forwashoff and cleaning, as defined in§ 63.801 of this subpart;(2) The number of pieces washed off, and the reason for the washoff; and(3) The quantity of spent organic HAPsolvent generated from each washoffand cleaning operation each month, and whether it is recycled onsite or disposed offsite.* * * * *(f) Spray booth cleaning.

  • Spray booth cleaning, including the interior sur- faces of the booth and the equipment contained within the booth.

  • Spray booth cleaning - The Permittee or operator shall not use compounds containing more than 8.0 percent by weight of VOC for cleaning spray booth components other thanconveyors, continuous coaters and total enclosures, or metal filters.

  • But economic deregulation, in contrast the restoration of the healthy forces of competition, where it can be relied on to do the job -- demands extreme per­ sistence, and a certain amount of animal cunning in cir­ cumventing the opposition of the people who like to be protected; but not, once one decides to deregulate, much more than simply getting out of the way.

  • Theses chronic LOCs for mammals are exceeded up to distances of 1,000 feet off field for certain uses.

  • Spray booth cleaning - VOC content of cleaning spray booth components shall not exceed 8 percent by weight.

  • Spray booth cleaning - The permittee shall not use compounds containing more than 8.0 percent by weight of VOC for cleaning spray booth components other than conveyors, continuous coaters and their enclosures, or metal filters, or plastic filters unless the spray booth is being refurbished.

  • Also the GC/MS analysis of the hydrophilic part of both plants showed the presence of nortrachelogenin.Both plants showed potent antibacterial activity; the most sensitive bacteria for the hydrophilic part of P.

Related to Spray booth cleaning

  • Dry cleaning means the process of cleaning articles using perchloroethylene.

  • Electrical cleaner means a product labeled to remove heavy soils such as grease, grime, or oil from electrical equipment, including, but not limited to, electric motors, armatures, relays, electric panels, or generators. Electrical Cleaner does not include “General Purpose Cleaner,” “General Purpose Degreaser,” “Dusting Aid,” “Electronic Cleaner,” “Energized Electrical Cleaner,” “Pressurized Gas Duster,” “Engine Degreaser,” “Anti-Static Product,” or products designed to clean the casings or housings of electrical equipment.

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Glass cleaner means a cleaning product designed primarily for cleaning surfaces made of glass. Glass cleaner does not include products designed solely for the purpose of cleaning optical materials used in eyeglasses, photographic equipment, scientific equipment and photocopying machines.

  • Cleaning means the act of removing septage or other wastes from a wastewater treatment system component or grease/waste from a grease interceptor.

  • Automotive windshield washer fluid means any liquid designed for use in a motor vehicle windshield washer system either as an antifreeze or for the purpose of cleaning, washing, or wetting the windshield. Automotive windshield washer fluid does not include fluids placed by the manufacturer in a new vehicle.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Membrane filtration means a pressure or vacuum driven separation process in which particulate matter larger than 1 micrometer is rejected by an engineered barrier, primarily through a size-exclusion mechanism, and which has a measurable removal efficiency of a target organism that can be verified through the application of a direct integrity test. This definition includes the common membrane technologies of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis.

  • Sludge dryer means any enclosed thermal treatment device that is used to dehydrate sludge and that has a maximum total thermal input, excluding the heating value of the sludge itself, of 2,500 Btu/lb of sludge treated on a wet-weight basis.

  • Field-flattening filter means a filter used to homogenize the absorbed dose rate over the radiation field.

  • Carpet and upholstery cleaner means a cleaning product designed for the purpose of eliminating dirt and stains on rugs, carpeting, and the interior of motor vehicles and/or on household furniture or objects upholstered or covered with fabrics such as wool, cotton, nylon or other synthetic fabrics. “Carpet and Upholstery Cleaner” includes, but is not limited to, products that make fabric protectant claims. “Carpet and Upholstery Cleaner” does not include “General Purpose Cleaners”, “Spot Removers”, vinyl or leather cleaners, dry cleaning fluids, or products designed exclusively for use at industrial facilities engaged in furniture or carpet manufacturing.

  • Pump spray means a packaging system in which the product ingredients within the container are not under pressure and in which the product is expelled only while a pumping action is applied to a button, trigger or other actuator.

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Hood means a respiratory inlet covering that completely covers the head and neck and may also cover portions of the shoulders and torso.

  • Dry cleaning facility means an establishment with one or more dry cleaning systems.

  • E-cigarette means any electronic oral device, such as one composed of a heating element and battery or electronic circuit, or both, which provides a vapor of nicotine or any other substances, and the use or inhalation of which simulates smoking. The term shall include any such device, whether manufactured, distributed, marketed, or sold as an e-cigarette, e-cigar, and e-pipe or under any other product, name, or descriptor.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Cold Weather Alert means the notice that PJM provides to PJM Members, Transmission Owners, resource owners and operators, customers, and regulators to prepare personnel and facilities for expected extreme cold weather conditions.

  • Disinfection means a process which inactivates pathogenic organisms in water by chemical oxidants or equivalent agents.

  • Soft drinks means nonalcoholic beverages that contain natural or artificial sweeteners. "Soft drinks" does not include beverages that contain milk or milk products, soy, rice, or similar milk substitutes, or that contains greater than fifty per cent vegetable or fruit juice by volume.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Green building strategies means those strategies that minimize the impact of development on the environment, and enhance the health, safety and well-being of residents by producing durable, low-maintenance, resource-efficient housing while making optimum use of existing infrastructure and community services.

  • Brachytherapy means a method of radiation therapy in which sealed sources are utilized to deliver a radiation dose at a distance of up to a few centimeters, by surface, intracavitary, or interstitial application.

  • Engine degreaser means a cleaning product designed to remove grease, grime, oil and other contaminants from the external surfaces of engines and other mechanical parts.