Recomplete definition

Recomplete means the subsequent completion of a well in a different pool.
Recomplete means an operation whereby a Completion in one Zone is abandoned in order to attempt a Completion in a different Zone within the existing wellbore.
Recomplete or "recompletion" means the subsequent completion of a well in a different pool from the pool in which it was originally completed.

Examples of Recomplete in a sentence

  • BOPE, if any, shall be indicated on the Application for Permit to Drill, Deepen, Re-enter, or Recomplete and Operate (Form 2), as well as any known subsurface conditions (e.g. under or over-pressured formations).

  • If a drilling rig is on location, notice of a proposal to Rework, Sidetrack, Recomplete, Plug Back or Deepen may be given by telephone and the response period shall be limited to forty-eight (48) hours, exclusive of Saturday, Sunday and legal holidays.

  • A copy of the approved Application for Permit to Drill, Deepen, Re-enter, or Recomplete and Operate, Form 2, shall be posted in a conspicuous place on the drilling rig or workover rig.

  • The Director may apply a condition of approval for Application for Permit to Drill, Deepen, Re-enter, or Recomplete and Operate, Form 2, to require remedial cementing during recompletion operations consistent with the provisions for protecting aquifers and hydrocarbon bearing zones in this Rule 317.

  • The Director may apply a condition of approval for Application for Permit to Drill, Deepen, Re-enter, or Recomplete and Operate, Form 2 requiring not less than twenty-four (24) hours nor more than seventy-two (72) hours verbal or written notice prior to spud.

  • If a drilling rig is on location, notice of a proposal to Rework, Sidetrack, Recomplete, Plug Back or Deepen may be given by telephone and the response period shall be limited to forty-eight (48) hours, exclusive of Saturday, Sunday, and legal holidays.

  • Modification Description (check one): Recomplete a well in a different reservoir Recomplete a well to commingle production from 2 or more reservoirs Stimulate a zone that has been in production Deepen a well Skid a rig 75 feet or less Add Lateral Extension Other: *A well completion report must be completed and submitted within 30 days following operations for: well recompletions, well stimulations, and deepening a well.

  • I have not been given any guarantee as to the results of examination or treatment.

  • Pursuant to the Swap Agreement, the Swap Counterparty will enter one or more Interest Rate Swap(s) with the Issuer which will allow the Issuer to hedge certain risks in connection with amounts to be paid by or to it in connection with the Notes (see “Risk Factors – 1.

  • For purposes hereof, the term "Change In Control" shall mean a sale, transfer, assignment, or other disposition (including by reorganization, merger or consolidation), of a controlling interest (i.e., at least 51% of the voting power) of the then outstanding stock of the Company, or of all or substantially all of the assets of the Company, or a liquidation or dissolution of the Company.


More Definitions of Recomplete

Recomplete or "recompletion" means any operation to:
Recomplete and other derivatives shall be construed accordingly.
Recomplete means the subsequent completion of a well in a different pool. 5043. "Reservoir" means pool or common source of supply.
Recomplete means to conduct a Recompletion.
Recomplete means an operation whereby a Completion in one Zone is abandoned in order to attempt a Completion in a different Zone within the existing wellbore. RECOMPLETION and other derivatives shall be construed accordingly.
Recomplete means an operation whereby a Completion in one Zone is abandoned in order to attempt a Completion in a different Zone within the existing wellbore. SINGLE OWNER TURNKEY DRILLING & OPERATING AGREEMENT, PAGE 1

Related to Recomplete

  • Recompletion means the completion for production of an existing well bore in another formation from which the well has been previously completed.

  • Rework and “Reworking” means subjecting a Product to one or more processing steps that are different from the established Manufacturing Process.

  • Drill means a response to a planned, simulated event.

  • Salvaging means the lawful and controlled removal of reusable materials from solid waste.

  • Shallow well means a well located and constructed in such a manner that there is not a continuous layer of low permeability soil or rock (or equivalent retarding mechanism acceptable to the department) at least 5 feet thick, the top of which is located at least 25 feet below the normal ground surface and above the aquifer from which water is to be drawn.

  • Dismantle means to take apart or remove any component, device or piece of equipment that is bolted, screwed, or fastened by other means and that would not be dismantled by a homeowner in the course of normal household maintenance

  • Well-logging means all operations involving the lowering and raising of measuring devices or tools that may contain sources of radiation into well-bores or cavities for the purpose of obtaining information about the well or adjacent formations.

  • Sanitize means to use a product or process to reduce contaminants and bacteria to a safe level.

  • Depth , in respect of a building, means the measured distance between the front line of the building and the back line of the rear main wall which separates the main building from the open space;

  • Injection well means a well into which fluids are injected. (See also “underground injection”.)

  • Cutting means to penetrate with a sharp-edged instrument and includes sawing, but does not include shearing, slicing, or punching.

  • Recalibration means the adjustment of all DRG weights to reflect changes in relative resource consumption.

  • borehole means a hole sunk into the earth for the purpose of locating, abstracting or using subterranean water and includes a spring;

  • reprocessing means the process carried out on a used device in order to allow its safe reuse including cleaning, disinfection, sterilisation and related procedures, as well as testing and restoration of the technical and functional safety of the used device;

  • Disconnect means the disabling of circuitry preventing both outgoing and incoming communications.

  • Casing means a pipe or tubing of appropriate material, of varying diameter and weight, lowered into a borehole during or after drilling in order to support the sides of the hole and thus prevent the walls from caving, to prevent loss of drilling mud into porous ground, or to prevent water, gas, or other fluid from entering or leaving the hole.

  • Acreage means the number of acres of land area of an Assessor's Parcel as shown on an Assessor's Parcel Map, or if the land area is not shown on an Assessor’s Parcel Map, the Board may rely on the land area shown on the applicable final map, parcel map, condominium plan, or other recorded County parcel map.

  • Flare means a vendor-provided informational sign that, at a minimum, displays the prize structure, the serial number of the sleeve in play, the odds of winning a prize, and the price of the ticket. (3-26-08)

  • Dry well means a type of infiltration practice that allows storm water run-off to flow directly into the ground via a bored or otherwise excavated opening in the ground surface.

  • Pile means any non-containerized accumulation of solid, nonflowing hazardous waste that is used for treatment or storage and that is not a containment building.

  • Workover means operations on a producing well to restore or increase production.

  • drilling means the act of boring a hole to reach a proposed bottom hole location through which oil or gas may be produced if encountered in paying quantities, and includes redrilling, sidetracking, deepening, or other means necessary to reach the proposed bottom hole location, testing, logging, plugging, and other operations necessary and incidental to the actual boring of the hole;

  • Excavate or "excavation" means ditching, dredging, or mechanized removal of earth, soil or rock.

  • Slug means any discharge of water, sewage, or industrial waste which in concentration of any given constituent or in quantity of flow exceeds for any period of duration longer than fifteen (15) minutes more than five (5) times the average twenty-four (24) hour concentration or flows during normal operation.

  • Moped means every vehicle that travels on not more than three wheels in contact with the ground

  • Tailings means material rejected from a mill after most of the valuable minerals have been extracted.