Rail Safety and Standards Board definition

Rail Safety and Standards Board means Rail Safety and Standards Board Limited, a company registered in England with registered number 04655675 whose registered office is at Xxxxx 0, Xxxxx Xxxxxx, 0 Xxxxxxx Xxxxxx, Xxxxxx XX0X 0XX;
Rail Safety and Standards Board or “RSSB” means Rail Safety and Standards Board Limited, a company registered in England with registered number 04655675 whose registered office is at The Helicon, 4th Floor, Xxx Xxxxx Xxxxx, Xxxxxx, XX0X 0XX; “Rail Safety and Standards Board Sustainable Development Self- Assessment Framework” means the online self-assessment framework against the Rail Industry Sustainable Development Principles published by the Rail Safety and Standards Board;
Rail Safety and Standards Board means the online self-assessment framework against the Rail Industry Sustainable Development 30 Note to Bidders - To be confirmed at the date of the Franchise Agreement Sustainable Development Self- Assessment Framework” Principles published by the Rail Safety and Standards Board;

Examples of Rail Safety and Standards Board in a sentence

  • Rail Safety and Standards Board (RSSB 2008), The weighting of non-fatal injuries, T440 Fatalities and Weighted Injuries.

  • Rail Safety and Standards Board (RSSB 2008): ‘Taking Safe Decisions’.

  • A more detailed breakdown of different types of modes of transport is undertaken by Kemp (2007) in a study for the UK Rail Safety and Standards Board.

  • To investigate these issues the Rail Safety and Standards Board (RSSB) set up a Cross-Industry RCM (XIRCM) research programme, which in turn acted as sponsor to the T1010 research project [3] from 2013 onwards.

  • If the total number of Police Officers is reduced to take account of those on a career break then the total at the end of February was 1,505 (1,469 FTE).

  • Computational Analysis of ORG-sub OOOComputational complexity of Algorithm 1.

  • Previously he was non-executive Chairman of eAsset Management Ltd and Chief Executive of the Rail Safety and Standards Board where he was a member of the cross-industry Technical Strategy Steering Group and chaired the committee responsible for the Sustainable Rail Programme.

  • Rail Safety and Standards Board, The Cost of Level Crossings: International Benchmarking Exercise, p.

  • It should be clearly stated in the Standard Terms of Tender document (section4.5.1.2) if this decision is made.

  • Rail Safety and Standards Board, The Cost of Level Crossings: International Benchmarking Exercise, Cambridge, 2006, p.


More Definitions of Rail Safety and Standards Board

Rail Safety and Standards Board. 36 means Rail Safety and Standards Board Limited, a company registered in England with registered number 04655675 whose registered office is at The Helicon, 0 Xxxxx Xxxxx, Xxxxxx XX0X 0XX;

Related to Rail Safety and Standards Board

  • Standards Board means the Professional Standards Board established pursuant to 14 Del.C. §1201.

  • Rail Safety Act means the Rail Safety Act 1998 (WA);

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Occupational Safety and Health Law means any Legal Requirement designed to provide safe and healthful working conditions and to reduce occupational safety and health hazards, and any program, whether governmental or private (including those promulgated or sponsored by industry associations and insurance companies), designed to provide safe and healthful working conditions.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Occupational Health and Safety Act means the Occupational Health and Safety Act, 1993 (Act No 85 of 1993);

  • Clean air standards, as used in this clause, means:

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. 1317).

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • NYSRC Reliability Rules means the rules applicable to the operation of the New York Transmission System. These rules are based on Reliability Standards adopted by NERC and NPCC, but also include more specific and more stringent rules to reflect the particular requirements of the New York Transmission System.

  • Public or private safety agency means a unit of state or local government, a special purpose district, or a private firm, which provides or has the authority to provide firefighting, police, ambulance, emergency medical services or hazardous materials response.

  • Council Regulation means Council Regulation (EC) No. 2100/94 of 27th July 1994 on Community plant variety rights;

  • Site Rules means all rules, regulations, directives and policies notified by the Company from time to time which are intended to be of general application to persons at a Site controlled or managed by the Company.

  • Standards Authority means NERC, and the NERC regional entities with governance over PJM and NYISO, any successor thereof, or any other agency with authority over the Parties regarding standards or criteria to either Party relating to the reliability of Transmission Systems.

  • SAFE Rules and Regulations means collectively, the Circular 37 and any other applicable SAFE rules and regulations, as amended.