Production Parts definition

Production Parts means, collectively, the Powertrain Battery and the Powertrain Parts.

Examples of Production Parts in a sentence

  • The following are PPM assignable: • Production Parts which do not meet drawing specifications or dimensional, functional, or appearance standards as called-out in the specifications or from an approved boundary sample (boundary Sample must be approved by authorized Engineering and Quality representatives from both organizations).

  • Suppliers may be requested to submit an Annual Validation and/or a validation for all or any Production Part(s) or Service(s) provided to Challenge Manufacturing.

  • Suppliers of Production Parts or Services must submit PPAP, with sample parts and documentation for approval, per AIAG-PPAP Manual guidelines (See AIAG PPAP Manual, Pg18 for the list of requirements).

  • General Terms and Conditions for EVENTS Prototype and Production Parts and Services, January 1, 2021).

  • Funding for prototype special tooling that is not intended for use to produce Production Parts will be provided and invoiced through a separate (Prototype Purchasing Department).

  • Unauthorized Submittal of Production Parts - When the Purchase Order requires Buyer acceptance of First Article prior to delivery, Seller shall not submit articles from a production run prior to Buyer's approval of First Article unless authorized by the Buyer in writing.

  • Global Production Parts & Logistics Division The Global Production Parts & Logistics Division mainly sells and provides services for automotive parts, as well as running a logistics business and a tire assembly business.

  • Payment by Toyota for the Production Parts under this Agreement prior to the end of the Production Parts Inspection Period shall not constitute its acceptance thereof, nor shall such payment remove Tesla’s responsibility for nonconforming Powertrain Parts.

  • In the upper catchment the Kopuaranga River retains a small amount of its original character, but it is extensively modified in the areas around Mauriceville.

  • Tooling disposition will be communicated to the supplier in writing by the BWI buyer.8.5.4.1 PreservationPackaging: Packaging must meet BWI Global Packaging & Shipping Standards for Production Parts (contact buyer for details).

Related to Production Parts

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.

  • Production means a method of obtaining goods including manufacturing, assembling, processing, raising, growing, breeding, mining, extracting, harvesting, fishing, trapping, gathering, collecting, hunting and capturing.

  • Production equipment (1 7 9) means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for "development" or for one or more phases of "production".

  • Bulk plant means a motor fuel storage and distribution facility that is not a terminal and from

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Postproduction means an activity related to the finishing or duplication of a medium described in Subsection 59-12-104(54)(a).

  • Bills of Quantities means the priced and completed Bill of Quantities forming part of the tender[where applicable].

  • Refined Products means gasoline, diesel fuel, jet fuel, asphalt and asphalt products, and other refined products of crude oil.

  • Production facility means a facility in California at which gasoline or CARBOB is produced. Upon request of a producer, the executive officer may designate, as part of the producer's production facility, a physically separate bulk storage facility which (A) is owned or leased by the producer, and (B) is operated by or at the direction of the producer, and (C) is not used to store or distribute gasoline or CARBOB that is not supplied from the production facility.

  • Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.

  • Production Unit means a facility for generation of electricity made up of a single generation unit or of an aggregation of generation units;

  • Bulk mixing plant means machinery, appliances or other similar devices that are assembled in such a manner so as to be able to mix materials in bulk for the purposes of using the mixed product for construction work;

  • Contract Quantity means the quantity of Delivered Energy expected to be delivered by Seller during each Contract Year as set forth in Section 3.1(e).

  • Raw Materials means all raw materials, supplies, components and packaging necessary to manufacture and ship the Product in accordance with the Specifications, as provided in Exhibit A, but not including the API.

  • Terminal Equipment means all telephone instruments, including pay telephone equipment, the common equipment of large and small key and PBX systems and other devices and apparatus, and associated wirings, which are intended to be connected electrically, acoustically or inductively to the telecommunication system of the telephone utility.

  • Plant means the machinery and apparatus intended to form or forming part of the Works.

  • Biodiesel means a fuel composed of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, and, in accordance with standards specified by the American society for testing and materials, designated B100, and meeting the requirements of D-6751, as approved by the department of agriculture.

  • Feedstock means a solid waste that will readily decompose during the composting process including but not limited to yard waste, agricultural waste, animal waste, food scraps, animal carcasses, raw rendering material, and mixed solid waste.

  • Refinery means a facility used to produce motor fuel from crude oil, unfinished oils, natural gas liquids, or other hydrocarbons and from which motor fuel may be removed by pipeline, by marine vessel, or at a rack.

  • Production Facilities (7 9) means "production equipment" and specially designed software therefor integrated into installations for "development" or for one or more phases of "production".

  • Production System means a live SAP system used for running Licensee’s internal business operations and where Licensee’s data is recorded.

  • Consumables means all items which are consumed in the execution of the Work, without being directly incorporated in the Work, such as fuel, electricity, water, POL, welding rods, electrodes and utilities.

  • Manufacturing site means the facilities where a Compound is Manufactured by or on behalf of a Party, as such Manufacturing Site may change from time to time in accordance with Section 8.7.

  • Production Operations means all operations conducted for the purpose of producing Petroleum from the Development Area after the commencement of production from the Development Area including the operation and maintenance of all necessary facilities therefor.

  • iron ore pellets means iron ore in pellet or other form produced by Pelletisation or more advanced reduction or other more advance treatment process from iron bearing material mined from the mining areas.

  • Bulk drug substance means any substance that is represented for use, and that, when used in the