Predictive emissions monitoring system (PEMS definition

Predictive emissions monitoring system (PEMS means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, lb/hr) on a continuous basis.
Predictive emissions monitoring system (PEMS means all of the equipment necessary to monitor process and control device opera- tional parameters and other information, and calculate and record the mass emissions rate on a continuous basis.
Predictive emissions monitoring system (PEMS means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2

Examples of Predictive emissions monitoring system (PEMS in a sentence

  • Predictive emissions monitoring system (PEMS) means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, lb/hr) on a continuous basis.

  • By adding the definition for “Predictive emissions monitoring system (PEMS)” as follows: Predictive emissions monitoring system (PEMS) – all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, lb/hr) on a continuous basis.

  • Predictive emissions monitoring system (PEMS) means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentra- tions), and calculate and record the mass emissions rate (for example, lb/hr) on a continuous basis.

  • Predictive emissions monitoring system (PEMS) means all of the equipment necessary to monitor process and control device opera- tional parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, lb/hr) on a continuous basis.

  • The Office of Legal Counsel Opinion just noted argues that immigration law emphasizes keeping families together: thus, in OLC’s judgment, the DHS guidance does in fact faithfully execute the law.127 Others, of course, strongly disagreed that the statute was so expansive.128Lawsuits stemming from this argument are pending, as of this writing.

  • Predictive emissions monitoring system (PEMS) means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, lb/hr) on a continuous basis.28.


More Definitions of Predictive emissions monitoring system (PEMS

Predictive emissions monitoring system (PEMS means all of the equipment necessary to monitor process and control device operational parameters (e.g., control device secondary voltages and electric currents) and other information (e.g., gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (e.g., pounds per hour) on a continuous basis.

Related to Predictive emissions monitoring system (PEMS

  • Predictive emissions monitoring system or "PEMS" means all of the equipment necessary to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and calculate and record the mass emissions rate (for example, pounds per hour) on a continuous basis.

  • Continuous emissions monitoring system (CEMS means all of the equipment that may be required to meet the data acquisition and availability requirements of this section, to sample, condition (if applicable), analyze, and provide a record of emissions on a continuous basis.

  • Continuous emissions monitoring system or “CEMS” means all of the equipment that may be required to meet the data acquisition and availability requirements of this chapter, to sample, to condition (if applicable), to analyze, and to provide a record of emissions on a continuous basis.

  • Fugitive dust emissions means particulate matter from process operations that does not pass through a process stack or vent and that is generated within plant property boundaries from activities such as: unloading and loading areas, process areas, stockpiles, stock pile working, plant parking lots, and plant roads (including access roads and haul roads).

  • PM10 emissions means PM10 emitted to the ambient air as measured by an applicable reference method, or an equivalent or alternate method, specified in 40 CFR Part 51, Appendix M as of December 8, 1984, or by a test method specified in these regulations or any supplement thereto.

  • Performance Monitoring System has the meaning given to it in paragraph 1.1.2 in Part B of Schedule 6 (Service Levels, Service Credits and Performance Monitoring);

  • Beam monitoring system means a system designed and installed in the radiation head to detect and measure the radiation present in the useful beam.

  • Fraud Monitoring System means an off-line administration system that monitors suspected occurrences of ABT- related fraud.

  • Signaling System 7 (SS7) means a signaling protocol used by the CCS Network.

  • Fugitive emissions means those emissions which could not reasonably pass through a stack, chimney, vent, or other functionally equivalent opening.

  • Nominal tomographic section thickness means the full width at half-maximum of the sensitivity profile taken at the center of the cross-sectional volume over which x-ray transmission data are collected.

  • Signaling System 7 (SS7 means a signaling protocol used by the CCS Network.

  • Evaporative emissions means the hydrocarbon vapours lost from the fuel system of a motor vehicle other than those from exhaust emissions;

  • Continuous emissions rate monitoring system or “CERMS” means the total equipment required for the determination and recording of the pollutant mass emissions rate (in terms of mass per unit of time).

  • Monitoring System means a system established by BNY to fulfill the Responsibilities specified in clauses (d) and (e) of Section 1 of Article III of this Agreement.

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • Continuous parameter monitoring system (CPMS means all of the equipment necessary to meet the data acquisition and availability requirements of the Prevention of Significant Deterioration program, to monitor process and control device operational parameters (for example, control device secondary voltages and electric currents) and other information (for example, gas flow rate, O2 or CO2 concentrations), and to record average operational parameter value(s) on a continuous basis.

  • Customer Proprietary Network Information (“CPNI”) is as defined in the Act.

  • Critical Energy Infrastructure Information means all information, whether furnished before or after the mutual execution of this Agreement, whether oral, written or recorded/electronic, and regardless of the manner in which it is furnished, that is marked “CEII” or “Critical Energy Infrastructure Information” or which under all of the circumstances should be treated as such in accordance with the definition of CEII in 18 C.F.R. § 388.13(c)(1). The Receiving Party shall maintain all CEII in a secure place. The Receiving Party shall treat CEII received under this agreement in accordance with its own procedures for protecting CEII and shall not disclose CEII to anyone except its Authorized Representatives.

  • Business Critical means any function identified in any Statement of Work as Business Critical.

  • Continuous emission monitoring system or "CEMS" means the equipment required under section 11 of this rule to sample, analyze, measure, and provide, by means of readings recorded at least once every fifteen (15) minutes, using an automated data acquisition and handling system (DAHS), a permanent record of nitrogen oxides emissions, stack gas volumetric flow rate, stack gas moisture content, and oxygen or carbon dioxide concentration, as applicable, in a manner consistent with 40 CFR 75*. The following systems are the principal types of continuous emission monitoring systems required under section 11 of this rule:

  • Negative pressure respirator (tight fitting) means a respirator in which the air pressure inside the facepiece is negative during inhalation with respect to the ambient air pressure outside the respirator.

  • Disinfection profile means a summary of Giardia lamblia inactivation through the treatment plant.

  • Staffing Information in relation to all persons identified on the Supplier's Provisional Supplier Personnel List or Supplier's Final Supplier Personnel List, as the case may be, such information as the Department may reasonably request (subject to all applicable provisions of the DPA), but including in an anonymised format: (a) their ages, dates of commencement of employment or engagement, gender and place of work; (b) details of whether they are employed, self employed contractors or consultants, agency workers or otherwise; (c) the identity of the employer or relevant contracting Party; (d) their relevant contractual notice periods and any other terms relating to termination of employment, including redundancy procedures, and redundancy payments; (e) their wages, salaries, bonuses and profit sharing arrangements as applicable; (f) details of other employment-related benefits, including (without limitation) medical insurance, life assurance, pension or other retirement benefit schemes, share option schemes and company car schedules applicable to them; (g) any outstanding or potential contractual, statutory or other liabilities in respect of such individuals (including in respect of personal injury claims); (h) details of any such individuals on long term sickness absence, parental leave, maternity leave or other authorised long term absence; (i) copies of all relevant documents and materials relating to such information, including copies of relevant Agreements of employment (or relevant standard Agreements if applied generally in respect of such employees); and (j) any other “employee liability information” as such term is defined in regulation 11 of the Employment Regulations;

  • Substance use disorder professional means a person

  • Customer Systems means the Customer's information technology infrastructure, including computers, software, hardware, databases, electronic systems (including database management systems) and networks, whether operated directly by Customer or through the use of third-party services.