Polarized light microscopy definition

Polarized light microscopy means the method of analyzing a bulk sample for asbestos content published at 40 CFR 763 Subpart E Appendix E.
Polarized light microscopy. (PLM) shall mean the measurement protocol for the assessment of the asbestos content of bulk materials.

Examples of Polarized light microscopy in a sentence

  • Polarized light microscopy (PLM) analysis was performed using the procedures detailed in the US Environmental Protection Agency “Methods for the Determination of Asbestos in Bulk Building Materials, US EPA Report No. 600/R-93/116”.

  • Polarized light microscopy of extenders in structural paints: Forensic applications, Microscope (1994) 42:167-175.

  • Polarized light microscopy, variability in spider silk diameters, and the mechanical characterization of spider silk.

  • Polarized light microscopy for 3-dimensional mapping of collagen fiber architecture in ocular tissues.

  • One procedure approved is: Method Number ID-191 Matrix: Bulk, 29 CFR, Part 1915, Occupational Safety and Health Standards for Shipyard Employment, Subpart Z, Toxic and Hazardous Substances, 1915.1001 App K, Polarized light microscopy of Asbestos – Non Mandatory,U.S. Department of Labor, Occupational Safety and Health Administration.

  • Polarized light microscopy (PLM): The laboratory is fully equipped and proficient in conducting PLM analyses of suspect ACM bulk samples in accordance with40 CFR 763, Subpart E, Appendix E; the laboratory is currently accredited by NIST under the NVLAP for bulk asbestos analysis and will use analysts with demonstrated proficiency to conduct PLM analyses.

  • Mine Safety and Health Admin., No. 08-1573, 2009 WL 9070947, at *3 (D.D.C. Sept.

  • Polarized light microscopy (PLM) was used for histological examination using a Meiji Techno RZT microscope (Saitama, Japan) with an integrated digital camera, Canon EOS Digital Rebel XT (Tokyo, Japan).

  • Polarized light microscopy of microemulsions did not exhibit optical birefringence.

  • Polarized light microscopy is a method of analysis that utilizes the unique optical crystallographic properties of the various crystalline forms in the samples.

Related to Polarized light microscopy

  • Filtering facepiece (dust mask) means a negative pressure particulate respirator with a filter as an integral part of the facepiece or with the entire facepiece composed of the filtering medium, not equipped with elastomeric sealing surfaces and adjustable straps.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • EPG means electronic program guide maintained by a DPO on its Digital Distribution Platform which lists the television channels and programs, and scheduling and programming information therein and includes any enhanced electronic guide that allows Subscribers to navigate and select such available channels and programs.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • PNode has the meaning set forth in the CAISO Tariff.

  • HEPA filter means a high efficiency particulate absolute air filter capable of trapping and retaining 99.97 percent of fibers greater than 0.3 micrometers in mass median aerodynamic diameter equivalent.

  • HIV/AIDS means human immunodeficiency virus/acquired immune deficiency syndrome;

  • SPID is the number that identifies a service provider to the relevant NPAC. The SPID may be a state-specific number. "Serving Wire Center" denotes the CenturyLink building from which dial tone for local Exchange Service would normally be provided to a particular End User Customer premises. "Signaling System 7" or "SS7" is an out-of-band signaling protocol consisting of four basic sub- protocols:

  • Single Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in a single homogeneous phase and which does not require that the product container be shaken before use.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Fluoroscopy means a technique for generating x-ray images and presenting them simultaneously and continuously as visible images. This term has the same meaning as the term "radioscopy" in the standards of the International Electrotechnical Commission.

  • SDK means the JetBrains Rider Software Development Kit and specifically including any associated JetBrains Rider software files, documentation, software code or other materials made available by JetBrains and any third-party software programs that are owned and licensed by parties other than JetBrains and that are either integrated with or made part of the SDK (collectively, “Third-Party Software”).

  • Translucent means a substance that allows light to pass through, but does not allow an object or person to be seen through the substance.

  • COVID-19 symptoms means fever of 100.4 degrees Fahrenheit or higher, chills, cough, shortness of breath or difficulty breathing, fatigue, muscle or body aches, headache, new loss of taste or smell, sore throat, congestion or runny nose, nausea or vomiting, or diarrhea, unless a licensed health care professional determines the person’s symptoms were caused by a known condition other than COVID-19.

  • Double Phase Aerosol Air Freshener means an aerosol air freshener with the liquid contents in two or more distinct phases that requires the product container be shaken before use to mix the phases, producing an emulsion.

  • Universal Digital Loop Carrier (UDLC means the DLC system that has a CO terminal channel bank that is connected to the CO switches on the analog side.

  • Autocycle means the same as that term is defined in Section 53-3-102.

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • cerebral palsy means a Group of non-progressive neurological condition affecting body movements and muscle coordination, caused by damage to one or more specific areas of the brain, usually occurring before, during or shortly after birth;

  • coronavirus means severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2);

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Strain means the classification of marijuana or cannabis plants in either pure sativa, indica, afghanica, ruderalis, or hybrid varieties.