Plastics Industry definition

Plastics Industry means the industry concerned with the conversion of thermoplastic and/or thermosetting polymers, including the compounding or recycling thereof, or the manufacture of articles or parts of articles wholly or mainly made of such polymers into rigid, semi-rigid or flexible form, whether blown, moulded, extruded, cast, injected, formed, calendered, coated, compression moulded or rotation moulded, including inhouse printing on such plastics by the manufacturers, and all operations incidental to these activities.
Plastics Industry which means the manufacture of articles or parts of articles wholly or mainly from plastics, but does not include the manufacture of the following articles made from plastic sheeting material, viz:
Plastics Industry means the industry concerned with the conversion of thermoplastic and/or thermosetting polymers, including the compounding or recycling thereof, or the manufacture of articles or parts of articles wholly or mainly made of such polymers into rigid, semi rigid or flexible form, whether blown, moulded, extruded, cast, injected, formed, calendered, coated, compression moulded or rotational moulded, including in-house printing on such plastics by the manufacturers, and all operations incidental to these activities.” ‘plastics ’ means any one of the group of materials which consist of or contains as an essential ingredient an organic substance of a large molecular mass and which, while solid in the finished state, at some stage in its manufacture has been or can be forced, i.e. cast, calendered, extruded or moulded into various shapes by flow, usually through the application, singly or together, of heat and pressure including the recycling or compounding thereof, but only where such compounding and/or recycling is as a result of the conversion for manufacture by the same employer, but shall exclude all extrusions into mono- and multi-filament fibres and other activities falling under the scope of the National Textile Bargaining Council”. (definition of “plastic” substituted by Government Notice R.355 of 15 April 2005).

Examples of Plastics Industry in a sentence

  • Lloyd Stouffer, Plastics Packaging: Today and Tomorrow, speech to the Society of the Plastics Industry, November 1963, available at https://discardstudies.

  • This assessment project was sponsored by ITP and The Society of the Plastics Industry, Inc.

  • He has over two decades of experience in Plastics Industry being associated with the Company as its Promoter and Executive Director right since its inception.

  • Efoc = the OC emission factor, which is 0.00134 pounds per pound of mold compound, as determined from a Society of Plastics Industry report, “Styrene emissions during the Charging and Molding Cycle”.

  • To identify plastics packaging materials, the BPF and the Association of Plastics Manufacturers in Europe (APME) have recommended the use of a coding system devised by the American Society of the Plastics Industry (SPI).

  • Further, Government initiatives are opening up opportunities for accelerated growth in the Plastics Industry.

  • The material shall be listed by PPI (Plastic Pipe Institute, a division of the Society of the Plastics Industry) in PPI TR-4 with a 73.4°F hydrostatic design basis of 800 psi.

  • Names and addresses of the user in the EU: Name: Turkish Plastics Industry Foundation (PAGEV), on behalf of Turkish plastic converters.

  • Pressure Ratings: Standard Grade hydrostatic design and pressure ratings as issued by the Plastics Pipe Institute (PPI), a division of the Society of the Plastics Industry (SPI).

  • Have you been involved as the driver in a motor vehicle accident If yes, give details.withinthepastsevenyears?.................................................Yes NoA) DATELOCATION(NUMBER / STREET / APT)CITY 84.


More Definitions of Plastics Industry

Plastics Industry means the industry concerned with the conversion of thermoplastic and/or thermosetting polymers, including the compounding or recycling thereof, or the manufacture of articles or parts of articles wholly or mainly made of such polymers into rigid, semi rigid or flexible form, whether blown, moulded, extruded, cast, injected, formed, calendered, coated, compression moulded or rotational moulded, including in-house printing on such plastics by the manufacturers, and all operations incidental to these activities.” (substituted by R627 of 13-7-2001 w.e.f. 23-7-2001)
Plastics Industry means the industry concerned with the conversion of thermoplastic and/or thermosetting polymers, including the compounding or recycling thereof, or the manufacture of articles or parts of articles wholly or mainly made of such polymers into rigid, semi rigid or flexible form, whether blown, moulded, extruded, cast, injected, formed, calendered, coated, compression moulded or rotational moulded, including in- house printing on such plastics by the manufacturers, and all operations incidental to these activities.” (definition of “plastics industry” substituted by R629 of 13-72001 w.e.f. 23-7-2001) “plastics’ means any one of the group of materials which consist of or contains as an essential ingredient an organic substance of a large molecular mass and which, while solid in the finished state, at some stage in its manufacture has been or can be forced, i.e. cast, calendered, extruded or moulded into various shape by flow, usually through the application, singly or together, of heat and pressure including the recycling or compounding thereof, but only where such compounding and/or recycling is as a result of the conversion for manufacture by the same employer, but shall exclude all extrusions into mono- and multi-filament fibres and other activities falling under the scope of the National Textile Bargaining Council”. (Amended by GN R.1022 of 21 October 2005)

Related to Plastics Industry

  • integrated iron and steel industry means an industry for the manufacture of iron and steel or for the manufacture of steel from iron ore by a process which does not necessarily involve the production of pig iron or basic iron in the production of steel;

  • Transportation Company means any organization which provides its own or its leased vehicles for transportation or which provides freight forwarding or air express services.

  • Logistics means the process of lifting coal from mines, bulk transportation and shall include loading and unloading at various points as may be necessary to effect the transportation as defined in Clause 2.0 Vol.-III, Scope of Work. It shall also imply necessary arrangements with transporters including railways, knowhow about processes, co-ordinating with various interfaces involved, minimizing losses, demurrages and including related documentation and arranging access to Railway siding etc.

  • Economy Transportation means the lowest published available transportation rate for a ticket on a Common Carrier matching the original class of transportation that You purchased for Your Trip.

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Good Industry Practice means standards, practices, methods and procedures conforming to the Law and the degree of skill and care, diligence, prudence and foresight which would reasonably and ordinarily be expected from a skilled and experienced person or body engaged in a similar type of undertaking under the same or similar circumstances.

  • GCP means the Good Clinical Practices officially published by EMA, FDA and the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) that may be in effect from time to time and are applicable to the testing of the Compounds.

  • Transportation network company means a company or organization facilitating and/or providing transportation services using a computer or digital application or platform to connect or match passengers with drivers for compensation or a fee.

  • Tobacco products means cigars, cigarettes, cheroots, stogies, periques, granulated, plug cut, crimp cut, ready rubbed, and other smoking tobacco, snuff, snuff flour, moist snuff, cavendish, ping and twist tobacco, fine-cut and other chewing tobaccos, shorts, refuse scraps, clippings, cuttings and sweepings of tobacco, and other kinds and forms of tobacco, prepared in such manner as to be suitable for chewing or smoking in a pipe or otherwise, or both for chewing and smoking.

  • domestic industry means the producers as a whole of the like or directly competitive goods operating in a Party, or those whose collective output of the like or directly competitive goods constitutes a major proportion of the total domestic production of those goods;

  • Disadvantaged Business Enterprise (DBE) means a firm certified as such by the Department in accordance with 49 CFR Part 26.

  • Homemaker services means the professionally directed or supervised simple household maintenance or management services provided by trained homemakers or individuals to families in their own homes.

  • International air transportation means transportation by air between a place in the United States and a place outside the United States or between two places both of which are outside the United States.

  • international air transport means air transport that passes through the airspace over the territory of more than one State;

  • Air Transportation Business means the carriage by aircraft of persons or property as a common carrier for compensation or hire, or carriage of cargo or mail by aircraft, in air commerce, as defined in 49 U.S.C. § 40102, as amended.

  • China means the People’s Republic of China, excluding, for purposes of this Agreement, Hong Kong, the Macau Special Administrative Region of the PRC and Taiwan.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Transportation network company rider or “rider” means an

  • Railway Group Standards means standards authorised pursuant to

  • COVID-19 means SARS-CoV-2 or COVID-19, and any evolutions thereof or related or associated epidemics, pandemic or disease outbreaks.

  • Bulk Electric System shall have the meaning provided for in the NERC Glossary of Terms used in Reliability Standards, as it may be amended, supplemented, or restated from time to time.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Ultra Low Sulfur Diesel Fuel means diesel fuel that has a sulfur content of no more than fifteen parts per

  • Ocean transportation means any transportation aboard a ship, vessel, boat, barge, or ferry through international waters.

  • Natural gas company ’ means a person engaged in the transportation of natural gas in interstate commerce, or the sale in inter- state commerce of such gas for resale.

  • Civil Aeronautical Product means any civil aircraft, aircraft engine, or propeller or subassembly, appliance, material, part, or component to be installed thereon.