Plastic film definition

Plastic film means single-use bags or coverings of consumer products made from plastic resins or derived from nonrenewable, petroleum- based feedstocks, including laundry or dry cleaning coverings, coverings or bags for clothes sold at retail, plastic film grocery sacks, plastic film shopping bags, fresh produce bags, and newspaper sleeves.
Plastic film means plastic bags as provided by merchants for the protection and containment of merchandise.
Plastic film means any non-woven, flexible plastic.

Examples of Plastic film in a sentence

  • Plastic film or plastic-coated fab- ric used, or intended for use as the outer layer of disposable diapers is ex- empt from the requirements of the Standard, provided that a sample taken from a full thickness of the as- sembled article passes the test in the Standard (part 1610 or part 1611) other- wise applicable to the outer fabric or film when the flame is applied to the exposed or uncovered surface.

  • Plastic film or plastic-coated fabric used, or intended for use, as the outer layer of disposable diapers is exempt from the require- ments of the standard, provided that a full thickness of the assembled article passes the test in the standard other- wise applicable to the outer fabric or film when the flame is applied to the exposed or uncovered surface.

  • Plastic film or plastic-coated fabric used, or intended for use, as the outer layer of disposable diapers is exempt from the require- ments of the standard, provided that a full thickness of the assembled article passes the test in the Standard other- wise applicable to the outer fabric or film when the flame is applied to the exposed or uncovered surface.

  • Fielding is what the players of the bowling team do when they are not batting.

  • Plastic film, foam plastic insulation and the paper facing on fiberglass insulation must be rated and covered with an approved thermal barrier.

  • Plastic film and paper is usually used as the packaging material for cut lengths.

  • Both of these are well ahead of the investment for the Town Centre regeneration.

  • Plastic film has been used in the bulk packaging of finished products when loading on pallets and we are looking for alternative materials and method for replacing the plastic film if possible.

  • Plastic film for insulation in cold weather must be approved by the Contract Administrator.

  • Plastic film that is installed on building elements shall be flame resistant as required for combustible decorative material, in accordance with Section 807.


More Definitions of Plastic film

Plastic film means plastic bags as provided by merchants for the protection and containment of merchandise, shrink wrap, and bubble wrap.
Plastic film means thin flexible sheets of plastic, sold in thicknesses of up to 10, mils, of which the majority produced are made of polyethylene resins. Plastic film is used to produce, and includes, shipping envelopes, cushioning, and void fill.

Related to Plastic film

  • Cartridge filter means a discrete filter unit containing one or more disposable cartridges that contain both filter paper and activated carbon which trap and remove contaminants from the cleaning solvent.

  • Plastic means material which contains as an essential ingredient a high polymer, such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, polybutylene terephthalate ;

  • Wedge filter means a filter which effects continuous change in transmission over all or a part of the useful beam.

  • Cartridge means a pleated or surface-type filter component with fixed dimensions that is designed to remove suspended particles from water flowing through the filter.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Diagnostic source assembly means the tube housing assembly with a beam-limiting device attached.

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • HEPA filter means a high efficiency particulate absolute air filter capable of trapping and retaining 99.97 percent of fibers greater than 0.3 micrometers in mass median aerodynamic diameter equivalent.

  • Electrostatic spray means a method of applying a spray coating in which opposite electric charges are applied to the substrate and the coating. The coating is attracted to the substrate by the electrostatic potential between them.

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Spot film means a radiograph which is made during a fluoroscopic examination to permanently record conditions which exist during that fluoroscopic procedure.

  • Pyrophoric material means any liquid that ignites spontaneously in dry or moist air at or below 130° F (54.4° C) or solid, other than one classed as an explosive, which under normal conditions is liable to cause fires through friction, retained heat from manufacturing or processing, or which can be ignited readily and, when ignited, burns so vigorously and persistently as to create a serious transportation, handling, or disposal hazard. Included are spontaneously combustible and water-reactive materials.

  • Sample means urine, blood, breath, saliva, or hair.

  • Catalog means the available list of tangible personal property or services, in the most current listing, regardless of date, during the life of the contract, that takes the form of a catalog, price list, schedule, shelf price or other form that:

  • Electrostatic application means the application to a substrate of charged atomized paint droplets that are deposited by electrostatic attraction.

  • Charcoal lighter material means any combustible material designed to be applied on, incorporated in, added to, or used with charcoal to enhance ignition. “Charcoal Lighter Material” does not include any of the following: (A) electrical starters and probes, (B) metallic cylinders using paper tinder, (C) natural gas, (D) propane, and (E) fat wood.

  • Film means single media or multimedia entertainment content for distribution or exhibition to the general public by any means and media in any digital media format, film, or videotape, including, but not limited to, a motion picture, a documentary, a television series, a television miniseries, a television special, interstitial television programming, long-form television, interactive television, music videos, interactive games, video games, commercials, internet programming, an internet video, a sound recording, a video, digital animation, or an interactive website.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Carton means 10 packs of cigarettes, each containing 20 cigarettes or eight packs, each containing

  • Dielectric material means a material that does not conduct direct electrical current. Dielectric coatings are used to electrically isolate UST systems from the surrounding soils. Dielectric bushings are used to electrically isolate portions of the UST system (e.g., tank from piping).

  • Pack means a package containing either 20 or 25 cigarettes.

  • Aerosol adhesive means any adhesive packaged as an aerosol product in which the spray mechanism is permanently housed in a nonrefillable can designed for hand-held application without the need for ancillary hoses or spray equipment. Aerosol adhesives include special purpose spray adhesives, mist spray adhesives, and web spray adhesives.

  • Cannabinoid extract means a substance obtained by separating cannabinoids from marijuana by:

  • Aerosol cooking spray means any aerosol product designed either to reduce sticking on cooking and baking surfaces or to be applied on food, or both.

  • Packaged means bottled, canned, cartoned, or securely wrapped.

  • Source material milling means any activity that results in the production of byproduct material as defined by definition (2) of byproduct material.