Periodic inspections and tests definition

Periodic inspections and tests means the periodic inspections and tests of elevator devices at yearly intervals where inspections are performed by an elevator inspector and tests are witnessed by an elevator inspector to check for compliance with the
Sample 1
Periodic inspections and tests means a grouping of inspections and tests required by the elevator maintenance control program or by these regulations on existing elevators, with the common time intervals determined by the authority having jurisdiction;
Sample 1

Examples of Periodic inspections and tests in a sentence

  • Periodic inspections and tests of all materials for the construction will be made to insure that all material is satisfactory and meets all requirements of the governing specifications.

  • Periodic inspections and tests shall assure that a safe operating condition is maintained.22–7.

  • Periodic inspections and tests shall assure that a safe operating condition is maintained.

  • Periodic inspections and tests may be discontinued while a lift is out of service.(b) Before the lift may be placed back into service, all applicable inspections and tests shall be performed as required by subs.

  • Periodic inspections and tests may be discontinued while a lift is out of service.(b) Before the lift may be placed back into service, all applica- ble inspections and tests shall be performed as required by subs.(2) and (4) to (8), and the permit−to−operate requirements in s.

  • Periodic inspections and tests may be discontinued while a lift is out of service.

  • Periodic inspections and tests of areas that are important to safety shall be conducted during the operation and annual maintenance of the plant units, and they have been defined and scheduled in the Technical Specifications.

  • Periodic inspections and tests required under this chapter shall be witnessed by the fire official.

  • Periodic inspections and tests shall not be required when an installation is placed "out of service".

  • Periodic inspections and tests of electrical and lightning rod installations, operating tools and devices, working and auxiliary premises from the preceding Article are carried out by an authorized professional institution in the field of occupational safety during commissioning and, subsequently, every three years, if no other deadlines have been set by a special regulation, or after changing the location or failures on devices or electrical installations.

Related to Periodic inspections and tests

  • Lead inspection means a surface-by-surface investigation to determine the presence of lead- based paint and the provisions of a report explaining the results of the investigation.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Commissioning test means tests applied to the Generating Facility, after completion of the construction of the Generating Facility, in order to verify that the Generating Facility may be released for Operation.

  • Tests means and include such test or tests to be carried out on the part of the contractor as are prescribed in the contract or considered necessary by BHEL, in order to ascertain the quality, workmanship, performance and efficiency of the contractor or part thereof.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Home inspection report means a written report that is

  • Final Inspection means the process and procedure described in UGC Section 12.1.

  • Inspections has the meaning set forth in Section 4.1.2.

  • Performance Tests means the tests to be conducted on the equipment at site for checking the performance parameters of the equipment as defined in Technical Specification.

  • Building Inspector means a person licensed to carry out completed residential building inspections under the Queensland Building and Construction Commission Regulations 2003;

  • Quality Surveillance Engineer / Inspector means any person appointed by or on behalf of the Purchaser to inspect or carry out quality surveillance on supplies, stores or work under the Contract or any person deputed by the Quality Surveillance Engineer for the said purpose.

  • Phase I assessment as described in, and meeting the criteria of, (i) Chapter 5 of the FNMA Multifamily Guide or any successor provisions covering the same subject matter in the case of a Specially Serviced Mortgage Loan as to which the related Mortgaged Property is multifamily property or (ii) the American Society for Testing and Materials in the case of Specially Serviced Mortgage Loan as to which the related Mortgaged Property is not multifamily property.

  • Performance and Guarantee Tests , shall mean all operational checks and tests required to determine and demonstrate capacity, efficiency, and operating characteristics as specified in the Contract Documents.

  • Onsite means within the Prescribed Premises boundary.

  • Marijuana testing facility means an entity licensed to analyze and certify the safety and potency of marijuana.

  • Maintenance Requirements shall have the meaning set forth in Clause 14.2;

  • Phase II means the second part of the tuition incentive assistance program which provides assistance in the third and fourth year of 4-year degree programs.

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • General Conditions Cost means costs incurred and minor work performed by Contractor without the need for competitive bids/proposals. The allowable General Conditions items are limited in Paragraph 11.1 and are further described on Exhibit “D”. The maximum allowable General Conditions Cost payable to Contractor during the Construction Phase of the Project is set out in Exhibit “A” attached to this Agreement.

  • Testing means that element of inspection that determines the properties or elements, including functional operation of materials, equipment, or their components, by the application of established scientific principles and procedures.

  • Certificate of inspection means an unsworn statement,

  • Phase I Environmental Assessment A “Phase I assessment” as described in, and meeting the criteria of, the ASTM, plus a radon and asbestos inspection.

  • Environmental and Social Impact Assessment or “ESIA” means a site-specific report, to be prepared in accordance with the parameters laid down in the ESMF (as hereinafter defined) and acceptable to the Association, identifying and assessing the potential environmental and social impacts of the activities to be undertaken for the Project, evaluating alternatives, and designing appropriate mitigation, management, and monitoring measures.

  • Site evaluation means a comprehensive analysis of soil and site conditions for an OWTS.

  • Compliance Review means an inspection of the home, grounds, and files to determine compliance with these regulations.