Open Road density definition

Open Road density means the linear distance of open roads per square kilometer.
Open Road density means the percentage of a defined grizzly bear analysis area that exceeds one mile of open road or motorized trail per square mile.

Related to Open Road density

  • Open burning means the combustion of any material without the following characteristics:

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR part 82, subpart G, with supplemental tables of alternatives available at (http://www.epa.gov/snap/ ).

  • Peak tube potential means the maximum value of the potential difference across the x-ray tube during an exposure.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Sewage sludge fee weight means the weight of sewage sludge, in dry U.S. tons, excluding admixtures such as liming materials or bulking agents. Annual sewage sludge fees, as per section 3745.11(Y) of the Ohio Revised Code, are based on the reported sludge fee weight for the most recent calendar year.

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.

  • Zone 2 means British Columbia and Alberta Receipt Points and Liquids Receipt Points at or upstream of the Blueberry Hill Compressor Station. ARTICLE 2 QUALITY‌ 2.1 Subject to Articles 2.4, 2.5, 2.6, 2.7 and 21.1 hereof, Gas tendered to Transporter at Receipt Points shall conform to the following Quality Specifications:‌

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Flocculation means a process to enhance agglomeration or collection of smaller floc particles into larger, more easily settleable particles through gentle stirring by hydraulic or mechanical means.

  • Normal Minimum Generation means the lowest output level of a generating resource under normal operating conditions.

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Density means the permitted number of dwelling units per

  • Turbidity means the cloudy condition of water due to the presence of extremely fine particulate materials in suspension that interfere with the passage of light.

  • Silicone-based Multi-purpose Lubricant means any lubricant which is:

  • Unstable area means a location that is susceptible to natural or human-induced events or forces capable of impairing the integrity of some or all of the landfill structural components responsible for preventing releases from a landfill. Unstable areas can include poor foundation conditions, areas susceptible to mass movements, and Karst terranes.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • Maximum contaminant level (MCL) means the maximum permissible level of a contaminant in water which is delivered to any user of a public water system.

  • Emission unit means any article, machine, equipment, operation, or contrivance that emits or has the potential to emit any federally regulated air pollutant.

  • Non-potable water means water not safe for drinking, personal, or culinary use as determined by the requirements of 35 Ill. Adm. Code 604.

  • Residual disinfectant concentration means the concentration of disinfectant measured in mg/L in a representative sample of water.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Maximum contaminant level means the maximum permissible level of a contaminant in water which is delivered to any user of a public water system.

  • emission limit value means the mass, expressed in terms of certain specific parameters, concentration and/or level of an emission, which may not be exceeded during one or more periods of time;

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Eligible area means a distressed area, a labor surplus area, an inner city area, or a situational distress area.

  • Cubic Metre means the volume of gas which occupies one cubic metre when such gas is at a temperature of 15 degrees Celsius, and at a pressure of 101.325 kilopascals absolute;