Maintenance Control Manual (MCM definition

Maintenance Control Manual (MCM means a document that describes the operator’s procedures necessary to ensure that all scheduled and unscheduled maintenance is performed on the operator’s aircraft on time and in a controlled and satisfactory manner;
Sample 1

Examples of Maintenance Control Manual (MCM in a sentence

  • The applicant therefore will also be expected to demonstrate use of its Approved Maintenance Organisation to ensure that procedures in the Maintenance Control Manual (MCM) and Maintenance Procedures Manual (MPM) are in agreement.

  • Procedures for the deferral of MEL items should be included as part of the operator's Maintenance Control Manual (MCM).

  • It is required that an operator shall have approved maintenance programmes relevant to all types of aircraft in the fleet defining the inspection, maintenance, preventive maintenance, and modifications requirements to be performed by him, or contracted to other approved persons that requires such work be performed in accordance with the operators Maintenance Control Manual (MCM).

  • Procedures for the deferral of MEL items will be included as part of the operator's Maintenance Control Manual (MCM).

  • AIR 2.035 Maintenance Control Manual (a) The Maintenance Control Manual (MCM), where required by CAR OPS 2A.620 or CAR OPS 4,702, shall be in the English language, the content shall be representative of the organisation and address compliance in accordance with CAR OPS 2A.810 or CAR OPS 4.804, as applicable.

  • The applicant therefore will also be expected to demonstrate use of its Approved Maintenance Organization to ensure that procedures in the Maintenance Control Manual (MCM) and Maintenance Procedures Manual (MPM) are in agreement.

  • Prior to flight all defects shall be actioned and certified or deferred in accordance with the procedures set forth in the Company Operations Manual (COM), Maintenance Control Manual (MCM) and Minimum Equipment List (MEL).

  • An example of a generic Maintenance Programme is shown in AC 91-10 and in the Private Operator Approval document in the Appendices to this AC.Because a private operator is not required to have a Maintenance Control Manual (MCM), the approved Maintenance Programme is usually lodged with the Technical Log.

  • The applicant therefore will also be expected to demonstrate use of its Approved Maintenance Organisation toensure that procedures in the Maintenance Control Manual (MCM) and Maintenance Procedures Manual (MPM) are in agreement.

  • A Maintenance Control Manual (MCM) is required for aircraft operated under CAR OPS 2A, OPS 2H or OPS 4 and having a C of A with a 36 month validity, but not required for aircraft operated under CAR OPS 2A, OPS 2H or OPS 4 that have a C of A validity for 12 or 24 months, although it is strongly recommended.

Related to Maintenance Control Manual (MCM

  • air traffic control service means a service provided for the purpose of:

  • Interconnection Activation Date means the date that the construction of the joint facility Interconnection arrangement has been completed, trunk groups have been established, joint trunk testing is completed and trunks have been mutually accepted by the Parties.

  • Disturbance Control Standard or “DCS” shall mean the reliability standard that sets the time limit following a disturbance within which a balancing authority must return its Area Control Error to within a specified range.

  • Analytical x-ray system means a group of components utilizing x-rays to determine the elemental composition or to examine the microstructure of materials.

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Water control structure means a structure within, or adjacent to, a water, which intentionally or coincidentally alters the hydraulic capacity, the flood elevation resulting from the two-, 10-, or 100-year storm, flood hazard area limit, and/or floodway limit of the water. Examples of a water control structure may include a bridge, culvert, dam, embankment, ford (if above grade), retaining wall, and weir.

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • Collateral Quality Tests means the Collateral Quality Tests set out in the Investment Management Agreement being each of the following:

  • Electronic Subcontracting Reporting System (eSRS) means the Governmentwide, electronic, web-based system for small business subcontracting program reporting. The eSRS is located at http://www.esrs.gov.

  • Database Management System (DBMS) A system of manual procedures and computer programs used to create, store and update the data required to provide Selective Routing and/or Automatic Location Identification for 911 systems. Day: A calendar day unless otherwise specified. Dedicated Transport: UNE transmission path between one of CenturyLink’s Wire Centers or switches and another of CenturyLink’s Wire Centers or switches within the same LATA and State that are dedicated to a particular customer or carrier. Default: A Party’s violation of any material term or condition of the Agreement, or refusal or failure in any material respect to properly perform its obligations under this Agreement, including the failure to make any undisputed payment when due. A Party shall also be deemed in Default upon such Party’s insolvency or the initiation of bankruptcy or receivership proceedings by or against the Party or the failure to obtain or maintain any certification(s) or authorization(s) from the Commission which are necessary or appropriate for a Party to exchange traffic or order any service, facility or arrangement under this Agreement, or notice from the Party that it has ceased doing business in this State or receipt of publicly available information that signifies the Party is no longer doing business in this State.

  • Service Control Point (SCP) is the node in the common channel signaling network that accepts Queries for certain Database services. The SCP is a real time database system that receives Queries from service platforms, performs subscriber or application-specific service logic, and then sends a Response back to the Query-originating platform. Such service platforms can be Service Switching Points (SSPs) or other network nodes capable of properly formatting and launching Queries.

  • Office of the Interconnection Control Center means the equipment, facilities and personnel used by the Office of the Interconnection to coordinate and direct the operation of the PJM Region and to administer the PJM Interchange Energy Market, including facilities and equipment used to communicate and coordinate with the Market Participants in connection with transactions in the PJM Interchange Energy Market or the operation of the PJM Region. On-Site Generators:

  • control zone shall have the meaning given in the Operating Agreement.

  • Collateral Quality Test A test satisfied as of the Effective Date and any other date thereafter on which such test is required to be determined hereunder if, in the aggregate, the Collateral Obligations owned (or in relation to a proposed purchase of a Collateral Obligation, both owned and proposed to be owned) by the Issuer satisfy each of the tests set forth below (or, after the Effective Date, if any such test is not satisfied at the time of reinvestment, the level of compliance with such test is maintained or improved as described in the Investment Criteria):

  • Vapor control system means a system that prevents release to the atmosphere of gasoline vapors in excess of 80 milligrams per liter of gasoline loaded (4.7 grains per liter).

  • Traffic control device means a flagger, sign, signal, marking, or other device used to regulate, warn or guide traffic, placed on, over, or adjacent to a street, highway, private road open to public travel, pedestrian facility, or shared-use path by authority of a public agency or official having jurisdiction, or, in the case of a private road open to public travel, by authority of the private owner or private official having jurisdiction.

  • Operational Manual means the manual referred to in Section 3.03 of this Agreement;

  • Air pollution control equipment means a mechanism, device, or contrivance used to control or prevent air pollution, that is not, aside from air pollution control laws and administrative regulations, vital to production of the normal product of the source or to its normal operation.

  • Area Control Error or “ACE” shall mean the instantaneous difference between a Balancing Authority’s net actual and scheduled interchange, taking into account the effects of Frequency Bias and correction for meter error.

  • Individual monitoring devices means devices designed to be worn by a single individual for the assessment of dose equivalent. For purposes of these regulations, "personnel dosimeter" and "dosimeter" are equivalent terms. Examples of individual monitoring devices are film badges, thermoluminescent dosimeters (TLDs), pocket ionization chambers, optically stimulated luminescence (OSL) dosimeters and personal air sampling devices.

  • Maintenance Program means a maintenance program for the Aircraft approved by the Aviation Authority, in conformity with the Maintenance Planning Document.

  • Emission Control Strategy means any device, system, or strategy employed with a diesel-fueled CI engine that is intended to reduce emissions. Examples of emission control strategies include, but are not limited to, particulate filters, diesel oxidation catalysts, selective catalytic reduction systems, alternative fuels, fuel additives used in combination with particulate filters, alternative diesel fuels, and combinations of the above.

  • area control service means air traffic control service for controlled flights in control areas;

  • authorized control level RBC means the number determined under the risk-based capital formula in accordance with the RBC instructions;

  • Database Management System (“DBMS”) is a computer process used to store, sort, manipulate and update the data required to provide Selective Routing and ALI.

  • Implementation Date means the date, occurring after the Approval Date, on which the Merger is implemented by the Merging Parties;