Licensed master plumber definition

Licensed master plumber means an individual partnership, corporation or other business association authorized under the provisions of this subchapter to install, maintain, repair, modify, extend or alter plumbing, standpipe where a sprinkler is not or is not now being connected, domestic water, connections to the domestic water, combination domestic water and reserve standpipe supply tank, up to and including the roof tank check valve, gas piping or any piping system referred to in subchapter sixteen of chapter one of title twenty-seven of the code and in reference standard RS-16 and up to [twenty] thirty sprinkler heads off the domestic water in any one building[,] in the city of New York which has satisfied the provisions of this subchapter for operation pursuant to a plate, certificate issued to an individual and seal.
Licensed master plumber means a person licensed pursuant to N.J.S.A. 45:14C-1 et seq. who has the qualifications, training, experience and technical knowledge necessary to properly plan, lay out, install and repair plumbing apparatus and equipment and to supervise others in the performance of such work in accordance with the rules established in this chapter.
Licensed master plumber means any person licensed by the Commissioner of Buildings to engage in the business or trade of master plumber to perform plumbing work within New York City.

Examples of Licensed master plumber in a sentence

  • Such repairs to be executed only by a North Dakota Licensed master plumber or other persons as have obtained a North Dakota general contractors license for such work.

  • Licensed master plumber to supervise work.No individual or firm shall engage in the business of installing, repairing or altering plumbing, unless the plumbing work performed in the course of such business is under the direct supervision of a licensed master plumber.Sec.

  • Bathtub Licensed master plumber only to remove existing tub, waste and drain overflow assembly. Any defective waste or vent lines should be replaced with PVC components or PEX piping. Replace defective materials with approved, complying with all local Board of health regulations and Building Codes pertaining to same. Adequately remove ceramic tile and plaster at bathtub area. A Plumbing permit to be obtained for the new installation from the City of Buffalo.

  • A children’s worker is one providing a regulated service in a specified organisation.


More Definitions of Licensed master plumber

Licensed master plumber means any person licensed by the Commissioner of Buildings to engage in the business or trade of master plumber to perform plumbing work within New York City. “Municipal Water Supply” shall mean all pipes, mains and structures owned and/or maintained by the City, for the conveyance of drinking water to the public for human consumption or any connection to the municipal water supply system.
Licensed master plumber means any person skilled in the installation of plumbing and licensed by the State Board of Health as a master plumber.

Related to Licensed master plumber

  • Licensed Material means the artistic or literary work, database, or other material to which the Licensor applied this Public License.

  • Master plumber means an individual who possesses the necessary skills and qualifications to plan and supervise the installation of plumbing and who is licensed as a master plumber.

  • Licensed Materials means any materials that Executive utilizes for the benefit of the Company (or any Subsidiary thereof), or delivers to the Company or the Company’s Customers, which (a) do not constitute Work Product, (b) are created by Executive or of which Executive is otherwise in lawful possession and (c) Executive may lawfully utilize for the benefit of, or distribute to, the Company or the Company’s Customers.

  • Development Site means any parcel or lot on which exists or which is intended for building development other than the following:

  • Marijuana products means concentrated marijuana products and marijuana products that are comprised of marijuana and other ingredients and are intended for use or consumption, such as, but not limited to, edible products, ointments, and tinctures.

  • Collaborative pharmacy practice agreement means a written and signed

  • Marijuana product means marijuana as defined in 50-32-101 and marijuana-infused products

  • Licensed Marks means the Localized Game Marks and such other trademarks expressly authorized in writing by Shengqu to be used by the Licensees.

  • Licensed Site means a place in any authorised street at which street trading may be engaged in by a Licence Holder, and includes any temporary alternative place approved by the Council or a duly authorised Officer of the Council.

  • Red Hat Products means Software, Services, Subscriptions and other Red Hat branded offerings made available by Red Hat.

  • Development Tool Kit means a DS Offering specifically designed for application or content development. A Development Tool Kit is either identified (i) with “CAA” or “ENOVIA Studio” or “Toolkit” or “Development Toolkit” in the DS Offering name, or (ii) in the Transaction Document and/or the Product Portfolio. Extended Enterprise User means an employee of Customer’s affiliate(s), supplier(s) and/or customer(s) authorized to use Customer’s DS Offering for the sole and exclusive purpose of enabling the Extended Enterprise User(s) to conduct business with Customer. The use of the DS Offering by any such Extended Enterprise User(s) (1) shall be solely limited to use (a) as configured and deployed by Customer and (b) in connection with the Extended Enterprise User’s performance of services for and on behalf of Customer, and (2) shall exclude any use by Extended Enterprise User (a) for its own account or a third party’s account, or (b) for the purpose of modifying, otherwise using, maintaining or hosting the DS Offering. Extended Enterprise Users are authorized if so specified in the Product Portfolio. Machine means a device on which a DS Offering is executed and which is either (1) (i) (a) belonging to Customer or under its sole control or supervision and (b) located on Customer’s premises or according to Teleworking conditions, or (ii) authorized by Customer according to its own information technology charter or equivalent whereby third party devices (such as Users own devices) are specifically authorized, or (2) operated by a third party service provider as specifically authorized in the Agreement solely for and on behalf of Customer. Product Portfolio means a set of information related to the DS Offerings available at xxxxx://xxx.0xx.xxx/terms/product-portfolio/licensed-programs. Remote Access means, if so specified in the Product Portfolio, that Users and/or Extended Enterprise Users may access and use the DS Offering remotely via the Internet from any country (subject inter alia to the export and re-export laws and regulations provisions of the Agreement). Teleworking means any program authorized by and for the benefit of Customer to enable its employees to work outside its own premises, using information and communication technology (or equivalent program established by a Customer entitled to Academic Use of the DS Offerings for its Users). Any use of DS Offerings while Teleworking is authorized if all of the following conditions are at all times met: (a) Customer’s employees do so on Machine(s) connected to Customer's network (e.g. via Virtual Private Network), (b) Customer is able to provide access to such Machine(s) during a compliance verification according to the Agreement, and (c) Customer’s employees use the DS Offerings for Customer’s exclusive internal needs. Same use is authorized for Users of a Customer entitled to Academic Use of the DS Offerings. User means any (a) Customer’s employee, or (b) employee of Customer’s consultant(s) or subcontractor(s) (i) who accesses a DS Offering,

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Existing Manufactured Home Park or Manufactured Home Subdivision means a manufactured home park or subdivision for which the construction of facilities for servicing the lots on which the manufactured homes are to be affixed (including, at a minimum, the installation of utilities, the construction of streets, and either final site grading or the pouring of concrete pads) was completed before the initial effective date of the floodplain management regulations adopted by the community.

  • Hemp products means all products made from industrial hemp,

  • Agricultural product means the products listed in Annex I to the Treaty, except fishery and aquaculture products listed in Annex I to Regulation (EU) No 1379/2013 of the European Parliament and of the Council of 11 December 2013;

  • Marijuana producer means a person who produces marijuana in this state.

  • Licensed facility means a facility licensed by the department under section 137 or an adult foster care facility.

  • City-based manufacturer means a person who: (i) holds any appropriate city license; (ii) is subject to applicable city taxes; and (iii) owns, operates, or leases a manufacturing facility within the city.

  • agricultural products means an animal or plant or a product, including any food or drink that is wholly or partly derived from an animal or plant, and includes all after acquired Agricultural Products of the Producer, or any proceeds therefore.

  • Medical marijuana product means a product that contains cannabinoids that have been extracted from plant material or the resin therefrom by physical or chemical means and is intended for administration to a licensed patient, including but not limited to concentrates, oils, tinctures, edibles, pills, topical forms, gels, creams, and other derivative forms, except that this term does not include live plant forms.

  • Licensed Software includes error corrections, upgrades, enhancements or new releases, and any deliverables due under a maintenance or service contract (e.g., patches, fixes, PTFs, programs, code or data conversion, or custom programming).

  • Retail marijuana store means an entity licensed to purchase marijuana from marijuana cultivation facilities and marijuana and marijuana products from marijuana product manufacturing facilities and to sell marijuana and marijuana products to consumers.

  • complex product means a product which is composed of multiple components which can be replaced permitting disassembly and re-assembly of the product.

  • Tobacco products means cigars, cigarettes, cheroots, stogies, periques, granulated, plug cut, crimp cut, ready rubbed, and other smoking tobacco, snuff, snuff flour, moist snuff, cavendish, ping and twist tobacco, fine-cut and other chewing tobaccos, shorts, refuse scraps, clippings, cuttings and sweepings of tobacco, and other kinds and forms of tobacco, prepared in such manner as to be suitable for chewing or smoking in a pipe or otherwise, or both for chewing and smoking.

  • Development Works means the external development works and internal development works on immovable property;

  • Nuclear fuel cycle-related research and development activities means those activities which are specifically related to any process or system development aspect of any of the following: - conversion of nuclear material, - enrichment of nuclear material, - nuclear fuel fabrication, - reactors, - critical facilities, - reprocessing of nuclear fuel, - processing (not including repackaging or conditioning not involving the separation of elements, for storage or disposal) of intermediate or high-level waste containing plutonium, high enriched uranium or uranium-233, but do not include activities related to theoretical or basic scientific research or to research and development on industrial radioisotope applications, medical, hydrological and agricultural applications, health and environmental effects and improved maintenance.