Leather coating definition

Leather coating means the application of any surface coating formulation to a leather substrate in a leather coating line.
Sample 1Sample 2Sample 3
Leather coating means the application of any surface coating formulation to a leather
Sample 1

Examples of Leather coating in a sentence

  • Coating activities (leather and winding wire coating):Table 7 Limit values for leather and winding wire coating Activity and threshold ELV for VOC(yearly for total ELV) Leather coating in furnishing and particular leather goods used as small consumer goods like bags, belts, wallets, etc.

  • In this way, the avant-garde movement, with its openness to new forms and aesthetics, provided the ideological armature necessary to link autochthonous cultures with a new sense of nation, one that now wished to break from its colonial past.Mariátegui’s treatment of the avant-garde serves as a point of contrast for the seemingly more “cautious” approach taken by López Albújar.

  • Coating activities (leather and winding wire coating): Table 7 Limit values for leather and winding wire coating Activity and threshold ELV for VOC (yearly for total ELV) Leather coating in furnishing and particular leather goods used as small consumer goods like bags, belts, wallets, etc.

  • Gliptone GT Quartz Leather coating is valid for 3 years on vehicles that are between 5 to 10 annual years of age.

Related to Leather coating

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Nuclear coating means any protective coating used to seal porous surfaces, such as steel or concrete, that otherwise would be subject to intrusion by radioactive materials. These coatings must be resistant to long term (service life) cumulative radiation exposure (ASTM D4082-83**), relatively easy to decontaminate (ASTM D4256-83**), and resistant to various chemicals to which the coatings are likely to be exposed (ASTM 3912-80**). General protective requirements are outlined by the Department of Energy (formerly United States Atomic Energy Commission Regulatory Guide 1.54**).

  • Metallic coating means a coating which contains more than five grams of metal particles per liter of coating, as applied. Metal particles are pieces of a pure elemental metal or a combination of elemental metals.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Roll coating means the application of a coating material to a substrate by means of hard rubber or steel rolls.

  • Topcoat means a coating that is applied over a primer on an aerospace vehicle or component for appearance, identification, camouflage, or protection. Topcoats that are defined as specialty coatings are not included under this definition.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Specialty coating means any coating that is manufactured and used for one (1) of the following specialized applications:

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Flow coating means a coating labeled and formulated exclusively for use by electric power companies or their subcontractors to maintain the protective coating systems present on utility transformer units.

  • Dip coating means the application of a coating material to a substrate by dipping the part into a tank of the coating material.

  • Repair coating means a coating used to re-coat portions of a previously coated product which has sustained mechanical damage to the coating following normal coating operations.

  • Basecoat means a coat of colored material, usually opaque, that is applied before graining inks, glazing coats, or other opaque finishing materials and is usually topcoated for protection.

  • Plastics means synthetic materials chemically formed by the polymerization of organic (carbon-based) substances. Plastics are usually compounded with modifiers, extenders, and/or reinforcers and are capable of being molded, extruded, cast into various shapes and films or drawn into filaments.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Mistletoe Thinning means the removal of designated conifer trees bearing visible mistletoe plants on branches as well as visible plants or infections on the stem.

  • Latrobe means Latrobe Health Services Inc. ABN 95 159 348 533 (otherwise referred to in these rules as “Latrobe” or “the fund”).

  • Low-solids coating means a coating containing 0.12 kilogram or less of solids per liter (one pound or less of solids per gallon) of coating material.

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • factory means any premises including the precincts thereof—

  • meat means the edible part of clean, sound striated muscle of cattle, swine, sheep, deer and other cervids, goat, turkey, duck, ratite, or chicken slaughtered in compliance with all applicable laws, with or without the accompanying and overlying fat, and sinew, nerve, gland, and blood vessels which normally accompany the muscle tissues and which are not separated from it in the process of dressing. Meat does not include specified risk materials.

  • Hydroelectric energy means water used as the sole source of energy to produce electricity.

  • Faux finishing coating means a coating labeled and formulated as a stain or a glaze to create artistic effects including, but not limited to, dirt, old age, smoke damage, and simulated marble and wood grain.