Examples of Leak Classification and Action Criteria in a sentence
Leak Classification and Action Criteria Guidelines for leak classification and leakage control are provided in Chapter X, Tables 3a, 3b and 3c of the Training Guide For Operators of Small LP-Gas Systems.
Following the adoption of IFRS 9 from 1 January 2018 the CRR introduced transitional rules to phase in the full CET1 effect over a five year period .The transition period has been further amended by the CRR COVID- 19 Amendment Regulation, the effect of this is to fully mitigate the increases in expected credit loss provisions arising in 2020, due to the COVID-19 pandemic.
Specifications and Bidder’s Bid Pages*Table 1 – Leak Classification and Action Criteria Attachment I – Gas Meter Leak/AOC Survey Tag Attachment II – Sample – NoticeAttachment III - Drawing*Complete, sign and submit forms as instructed in the RFQ.
Each Operator shall institute and maintain on a continuing basis, records that identify any leaks discovered on the Pipeline facilities it operates, which records shall include, at a minimum, the location, date of discovery, classification under the Operator’s Leak Classification and Action Criteria, and the steps taken in response to such leaks.
It uses the Leak Classification and Action Criteria provided in the 2009 GPTC Guide, as recommended.
Each Operator shall identify a Leak Classification and Action Criteria applicable to the Pipeline facilities it operates in Delaware, which classification and criteria shall be consistent with the Federal Regulations.
Operators of an intrastate pipeline transporting natural gas and other gas pipeline system will grade and report all detected leakage by the following standard -- ASME Guide for Gas Transmission and Distribution Pipeline Sys- tems Material, Appendix G-11-1983 (1983 Revision), Leak Classification and Action Criteria, incorporated by ref- erence and on file with the Office of the Secretary of State.
These appendices include information related to the prompt repair of hazardous leaks.Type B operators must repair hazardous leaks as required by §192.9(d)(8) and may follow the guidelines of Table 3a Leak Classification and Action Criteria for Grade 1 leaks or other operator criteria to define hazardous leaks.Repairs to Type B gathering lines should be made in accordance with requirements for transmission lines.
However, it is possible that further refinements could be made to GO 112-F to reflect changing annual report requirements (Section 123, Annual Reports); leak survey cycles(Section 143.1 Distribution and Transmission Leakage Surveys and Procedures); and Leak Classification and Action Criteria Grade Definition of Priority of Leak 7 See Amended Scoping Memo at 5-6.8 See First Phase Decision at 10.